Bonjour,
Je reviens vers vous avec quelques infos en plus.
Ma caméra est désormée configurée comme suit au niveau du network
adresse IP fixe : 192.168.2.10x
Masque sous-reseau : 255.255.255.0
Default routeur : 192.168.2.1
Primary DNS : idem default routeur
HTTP port : 80
Maintenant au niveau de mon routeur j'ai plusieurs fenêtres et je ne sais pas dans laquelle indiquer la route vers ma caméra :
Si j'ai bien compris c'est au niveau du NAT, la j'ai 3 propositions :
1) Address Mapping
Network Address Translation (NAT) allows IP addresses used in a private local network to be mapped to one or more addresses used in the public, global Internet. This feature limits the number of public IP addresses required from the ISP and also maintains the privacy and security of the local network. We allow one public IP address to be mapped to a pool of local addresses.
Address Mapping
Global IP:... is transformed as multiple virtual IPs
from 192.168.2. to 192.168.2.
Note: Please make sure your DHCP server lease time is set to "Forever".
2)Virtual Server
You can configure the wireless router as a virtual server so that remote users accessing services such as the Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the wireless router redirects the external service request to the appropriate server (located at another internal IP address). This tool can support both port ranges, multiple ports, and combinations of the two.
For example: Port Ranges: 100-150
Multiple Ports: 25,110,80
Combination: 25-100,80
All known port number
3) Special Applications
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications cannot work when Network Address Translation (NAT) is enabled. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open them for inbound traffic.
Note: The range of the Trigger Ports is from 1 to 65535.
Trigger Port Trigger Type Public Port
List of well known special applications
Si vous pouviez m'indiquer vers laquelle je dois aller....
Merci d'avance pour votre aide
Adresse ip neufbox tv
