changer de noyeau ubuntu 9.04 et real timeFermé

Question

Bonjour,
ça fait plusieurs jours que j'essaie de changer mon noyau car je travaille dans le son et le temp réel est important donc.

mon noyeau actuel est le : 2.6.28-14-generic
j'ai suivi ce tuto:
http://www.linuxmao.org/tikiwiki/tiki-i … oyau+2.6RT
sur le sîte de linux mao mais ça bloque ici:

  sudo make-kpkg --revision 1 --initrd kernel_image kernel_headers modules_image
[sudo] password for cedric0:
exec debian/rules  DEBIAN_REVISION=1  INITRD=YES  kernel_image kernel_headers modules_image
/usr/bin/make -f ./debian/rules     debian/stamp/binary/pre-linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23
make[1]: entrant dans le répertoire « /usr/src/linux-2.6.29.6-rt23 »
====== making target debian/stamp/binary/pre-linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23 [new prereqs: linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23]======

This is kernel package version 11.015.
/usr/bin/make -f ./debian/rules debian/stamp/binary/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23
make[2]: entrant dans le répertoire « /usr/src/linux-2.6.29.6-rt23 »
====== making target debian/stamp/binary/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23 [new prereqs: ]======

This is kernel package version 11.015.
install -p -d -o root -g root  -m  755 /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN
sed -e 's/=V/2.6.29.6-rt23linux-2.6.29.6-rt23/g'    -e 's/=IB//g' \
        -e 's/=ST/linux/g'  -e 's/=R//g' \
        -e 's/=K/bzImage/g'     -e 's/=L/lilo/g'         \
        -e 's/=I/YES/g'     -e 's,big_smile,/boot,g'         \
        -e 's/=MD/initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, /g'                     \
        -e 's@=MK@mkinitramfs-kpkg mkinitrd.yaird@g' -e 's@=A@amd64@g'   \
        -e 's@=M@@g'    -e 's/=OF//g'    \
        -e 's/=S//g' -e 's@=B@x86_64@g'     \
      ./debian/pkg/image/postinst > /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/postinst
chmod 755 /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/postinst
sed -e 's/=V/2.6.29.6-rt23linux-2.6.29.6-rt23/g'       -e 's/=IB//g' \
        -e 's/=ST/linux/g'  -e 's/=R//g' \
        -e 's/=K/bzImage/g'     -e 's/=L/lilo/g'         \
        -e 's/=I/YES/g'     -e 's,big_smile,/boot,g'         \
        -e 's/=MD/initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, /g'                     \
        -e 's@=MK@mkinitramfs-kpkg mkinitrd.yaird@g' -e 's@=A@amd64@g'   \
        -e 's@=M@@g'    -e 's/=OF//g'    \
        -e 's/=S//g'  -e 's@=B@x86_64@g'    \
     ./debian/pkg/image/config > /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/config
chmod 755 /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/config
sed -e 's/=V/2.6.29.6-rt23linux-2.6.29.6-rt23/g'       -e 's/=IB//g' \
        -e 's/=ST/linux/g'  -e 's/=R//g' \
        -e 's/=K/bzImage/g'     -e 's/=L/lilo/g'         \
        -e 's/=I/YES/g'     -e 's,big_smile,/boot,g'         \
        -e 's/=MD/initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, /g'                     \
        -e 's@=MK@mkinitramfs-kpkg mkinitrd.yaird@g' -e 's@=A@amd64@g'   \
        -e 's@=M@@g'    -e 's/=OF//g'    \
        -e 's/=S//g' -e 's@=B@x86_64@g'     \
     ./debian/pkg/image/postrm > /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/postrm
chmod 755 /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/postrm
sed -e 's/=V/2.6.29.6-rt23linux-2.6.29.6-rt23/g'       -e 's/=IB//g'       \
        -e 's/=ST/linux/g'  -e 's/=R//g' \
        -e 's/=K/bzImage/g'     -e 's/=L/lilo/g'         \
        -e 's/=I/YES/g'     -e 's,big_smile,/boot,g'         \
        -e 's/=MD/initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, /g'                     \
        -e 's@=MK@mkinitramfs-kpkg mkinitrd.yaird@g' -e 's@=A@amd64@g'   \
        -e 's@=M@@g'    -e 's/=OF//g'    \
        -e 's/=S//g' -e 's@=B@x86_64@g'     \
     ./debian/pkg/image/preinst > /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/preinst
chmod 755 /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/preinst
sed -e 's/=V/2.6.29.6-rt23linux-2.6.29.6-rt23/g'    -e 's/=IB//g'    \
        -e 's/=ST/linux/g'  -e 's/=R//g' \
        -e 's/=K/bzImage/g'     -e 's/=L/lilo/g'         \
        -e 's/=I/YES/g'     -e 's,big_smile,/boot,g'         \
        -e 's/=MD/initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, /g'                     \
        -e 's@=MK@mkinitramfs-kpkg mkinitrd.yaird@g' -e 's@=A@amd64@g'   \
        -e 's@=M@@g'    -e 's/=OF//g'    \
        -e 's/=S//g' -e 's@=B@x86_64@g'     \
     ./debian/pkg/image/prerm > /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/prerm
chmod 755 /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/prerm
echo using old template
using old template
sed -e 's/=V/2.6.29.6-rt23linux-2.6.29.6-rt23/g'    -e 's/=IB//g'    \
        -e 's/=ST/linux/g'  -e 's/=R//g' \
        -e 's/=K/bzImage/g'     -e 's/=L/lilo/g'          \
        -e 's@=MK@mkinitramfs-kpkg mkinitrd.yaird@g' -e 's@=A@amd64@g'   \
        -e 's/=I/YES/g'     -e 's,big_smile,/boot,g'        \
        -e 's/=MD/initramfs-tools (>= 0.53) | yaird (>= 0.0.11) | linux-initramfs-tool, /g'                                \
        -e 's@=M@@g'    -e 's/=OF//g'    \
        -e 's/=S//g' -e 's@=B@x86_64@g'     \
     ./debian/templates.l10n   > ./debian/templates.master
install -p    -o root -g root  -m  644 ./debian/templates.master /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/DEBIAN/templates
dpkg-gencontrol -DArchitecture=amd64 -isp         \
            -plinux-image-2.6.29.6-rt23linux-2.6.29.6-rt23 -P/usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23/
create_md5sums_fn () { cd $1 ; find . -type f ! -regex '.*/DEBIAN/.*' ! -regex './etc/.*'      ! -regex '.*lib/modules/[^/]*/modules\..*' -printf '%P\0' | xargs -r0 md5sum > DEBIAN/md5sums ; if [ -z "DEBIAN/md5sums" ] ; then rm -f "DEBIAN/md5sums" ; fi ; } ; create_md5sums_fn           /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23
chmod -R og=rX               /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23
chown -R root:root           /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23
dpkg --build               /usr/src/linux-2.6.29.6-rt23/debian/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23 ..
dpkg-deb : construction du paquet « linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23 » dans « ../linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23_1_amd64.deb ».
dpkg-deb: le répertoire de contrôle n'a pas les bonnes permissions 2755 (doit être >=0755 et <=0775)
make[2]: *** [debian/stamp/binary/linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23] Erreur 2
make[2]: quittant le répertoire « /usr/src/linux-2.6.29.6-rt23 »
make[1]: *** [debian/stamp/binary/pre-linux-image-2.6.29.6-rt23linux-2.6.29.6-rt23] Erreur 2
make[1]: quittant le répertoire « /usr/src/linux-2.6.29.6-rt23 »
make: *** [kernel_image] Erreur 2

bon là j'avoue je bloque je suis loin d'être un spécialiste de linux ....
je comprend pas puisque que je suis en mode superutilisateur pourquoi il me met ça ?
si quelqu'un pouvait m'aider ce serait sympa ....voire m'orienter vers un tuto plus récent.....
merci d'avance...

bob031 · Answer

Bonjour,

le système dit ceci :

dpkg-deb: le répertoire de contrôle n'a pas les bonnes permissions 2755 (doit être >=0755 et <=0775) 

ma première idée serait de faire ce qu'on me dit et de mettre les "bonnes" permissions ...

cece466 · Answer

salut et merci de ton aide...
oui ce que j'ai fait 
sudo chmod 775 /usr/src/linux
mais ça ne change rien...

bob031 · Answer

tu as essayé chmod -R 0755 ?

cece466 · Answer

non mais je vais le faire je te tiens au courant car j'ai vraiment envi que ça marche cette histoire ça fait 3 jours que je suis là dessus...
merci bob 31
je te tiens au courant...

bob031 · Answer

si néanmoins cela ne fonctionnait toujours pas, l'autre question est de savoir si tu as refait ton lien symbolique /usr/src/linux pointant vers ton nouveau noyau ?
les explications ici :
https://www.mail-archive.com/debian-user-french@lists.debian.org/msg159155.html

cece466 · Answer

non ce n'est pas ça je viens de changer les droits et recréer un lien symbolique mais ça ne change rien...
voici le tuto que j'ai suivi mais c'est un peu brouillon ( ce n'est pas un jugement de valeur..)
peut être pourras tu me dire si il y a des erreurs quetu vois qui font que ça ne marche pas?
merci de ton aide en tout cas..
j'attend ta réponse et je crois que je vais tout recommencer.....

bob031 · Answer

fais-tu un :
make-kpkg clean
avant de recompiler ?

cece466 · Answer

non je re-teste merci....je te dis...

cece466 · Answer

salut bon j'en suis encore là...
j'ai changé les droit comme tu me l'a expliqué hier mais ensuite j'ai eu un probléme 
avec sudo chmod -R nom du dossier ça a marché mais impossible de lancer les mises a jours ensuite via synaptic et de passer en root pour faire les manips..
il me mettait un truc du genre setuid avec je sais plus quoi...
dans le doute j'ai éssayé une autre méthode.:
  http://www.informatique-inside.com/forum/s169-tuto-changer-noyau-sous-ubuntu.html
là ça compile ...
j'espére seulement que je pourais patcher le RT aprés coup ...
peux tu confirmer?
merci encore de ton aide..
cedric

lami20j · Answer

Salut,

Avec tout ce que j'ai vu dans le tuto et comme de toute façon on doit faire
cp /boot/config-`uname -r` ./.config
make menuconfig
J'aurais opté pour une "vraie" compilation, "à la mano" ;-)))

bob031 · Answer

Salut,

peux tu confirmer? 

je dirais comme lami20j ! d'ailleurs comme c'est un spécialiste de la compilation, il se fera un plaisir de te donner un coup de main ...  :-)

j'ai changé les droit comme tu me l'a expliqué hier mais ensuite j'ai eu un probléme
avec sudo chmod -R nom du dossier ça a marché mais impossible de lancer les mises a jours ensuite via synaptic et de passer en root pour faire les manips..
il me mettait un truc du genre setuid avec je sais plus quoi... 

je n'ai pas tout compris dans ton passage, mais j'ai l'impression que la compilation a fonctionné, non ?
et il aurait fallu détailler les messages d'erreur .....

cece466 · Answer

salut 
ben en fait au depart je suis parti sur l'idée de passer le patch RT en même temp comme expliqué sur ce tuto... 
http://linuxmao.org/tiki-index.php?page=Tuto%20Compiler%20un%20noyau%20Temps-R%C3%A9el&structure=Accueil+Tutos&redirectpage=Tuto%20Compiler%20un%20noyau%20Temps-R%C3%A9el
alors le probléme c''est que soit c'est moi ou c'est mal expliqué car ils ne parlent pas des droits ....
donc ça fait plusieurs jours que je bloque là dessus ..
j'ai donc decidé d'éssayer ça qui m'a l'air beaucoup plus simple...
mais là aussi ils ne parlent pas de comment modifier son /boot/grub/menu.lst...

voici le mien :
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-14-generic
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-14-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro  single
initrd		/boot/initrd.img-2.6.28-14-generic

title		Ubuntu 9.04, kernel 2.6.28-11-generic
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro  single
initrd		/boot/initrd.img-2.6.28-11-generic

title		Ubuntu 9.04, memtest86+
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title		Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title		Windows XP Professional x64 Edition
rootnoverify	(hd0,0)
savedefault
makeactive
chainloader	+1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title		Windows XP Professional x64 Edition
rootnoverify	(hd1,0)
savedefault
makeactive
map		(hd0) (hd1)
map		(hd1) (hd0)
chainloader	+1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.28-3-rt (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.28-3-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro quiet splash 
initrd		/boot/initrd.img-2.6.28-3-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.28-3-rt (recovery mode) (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.28-3-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro single 
initrd		/boot/initrd.img-2.6.28-3-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-24-rt (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-24-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro quiet splash 
initrd		/boot/initrd.img-2.6.24-24-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-24-rt (recovery mode) (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-24-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro single 
initrd		/boot/initrd.img-2.6.24-24-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-19-rt (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-19-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro quiet splash 
initrd		/boot/initrd.img-2.6.24-19-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-19-rt (recovery mode) (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-19-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro single 
initrd		/boot/initrd.img-2.6.24-19-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, memtest86+ (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/memtest86+.bin  
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb4.
title		Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sdb4)
root		(hd1,3)
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=e68012a4-3033-44ae-b713-ed80aa9c984c ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb4.
title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sdb4)
root		(hd1,3)
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=e68012a4-3033-44ae-b713-ed80aa9c984c ro single 
initrd		/boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb4.
title		Ubuntu 9.04, memtest86+ (on /dev/sdb4)
root		(hd1,3)
kernel		/boot/memtest86+.bin  
savedefault
boot

je précise que je suis en train de compiler le noyau 2.6.29.6...sur la partition sda7(sata..)
 
et ils ne disent pas si c'est possible de patcher le RT aprés coup....(patch 2.6.29.6-rt23)
dans leur tuto ils donnent un exemple en patchant le RT en même temp quele changement de noyau...
c'est oeut être pour ça que ça passe pas..?

lami20j · Answer

Salut,

Affiche le résultat de 
ls -l /boot/{vm,init}*

cece466 · Answer

ça compile là c'est long à chaque fois.....le noyau 2.6.29.6 n'apparait pasvu qu'il est en train....
 ls -l /boot/{vm,init}*
-rw-r--r-- 1 root root 7936083 2009-08-04 13:29 /boot/initrd.img-2.6.28-11-generic
-rw-r--r-- 1 root root 7951199 2009-08-04 13:46 /boot/initrd.img-2.6.28-14-generic
-rw-r--r-- 1 root root    1170 2009-04-17 05:39 /boot/vmcoreinfo-2.6.28-11-generic
-rw-r--r-- 1 root root    1170 2009-07-25 04:50 /boot/vmcoreinfo-2.6.28-14-generic
-rw-r--r-- 1 root root 3522336 2009-04-17 05:34 /boot/vmlinuz-2.6.28-11-generic
-rw-r--r-- 1 root root 3511008 2009-07-25 04:48 /boot/vmlinuz-2.6.28-14-generic
merci de ton aide....

cece466 · Answer

en regardant bien mon /boot/grub/menu.lst j'ai vu ça..

title		Ubuntu 9.04, kernel 2.6.28-14-generic
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-14-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro  single
initrd		/boot/initrd.img-2.6.28-14-generic

est ce qu'en recopiant ça ça irait?

title		Ubuntu 9.04, kernel 2.6.29-6-generic
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.29-6-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro quiet splash 
initrd		/boot/initrd.img-2.6.29-6-generic
quiet

title		Ubuntu 9.04, kernel 2.6.29-6-generic (recovery mode)
uuid		fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859
kernel		/boot/vmlinuz-2.6.29-6-generic root=UUID=fbeed3ed-fcbf-47ed-8a3f-44b3a47e0859 ro  single
initrd		/boot/initrd.img-2.6.29-6-generic

et je suppose en tête de page car le dernier doit être en premier?
hdb correspond à mon disque IDE là j'installe sur mon SATA qui est en maitre sur IDE1 ou 0 enfin le premier quoi...
merci de suivre....

cece466 · Answer

ben non même en changeant de tuto ça marche pô...
il me met ça aprés au moin 2 heures à attendre ...
make[1]: quittant le répertoire « /usr/src/linux-2.6.29.6 »
test ! -e scripts/package/builddeb || mv -f scripts/package/builddeb scripts/package/builddeb.kpkg-dist
test ! -e scripts/package/Makefile || test -f scripts/package/Makefile.kpkg-dist || (mv -f scripts/package/Makefile scripts/package/Makefile.kpkg-dist && (echo "# Dummy file "; echo "help:") >  scripts/package/Makefile)
COLUMNS=150 dpkg -l 'gcc*' perl dpkg 'libc6*' binutils make dpkg-dev |\
	 awk '$1 ~ /[hi]i/ { printf("%s-%s
", $2, $3) }'> debian/buildinfo
uname -a >> debian/buildinfo
echo using the compiler: >> debian/buildinfo
grep LINUX_COMPILER include/linux/compile.h | \
	   sed -e 's/.*LINUX_COMPILER "//' -e 's/"$//' >> debian/buildinfo
echo applied kernel patches: >> debian/buildinfo
echo done > debian/stamp/build/kernel
/usr/bin/make -f ./debian/rules 	debian/stamp/binary/pre-linux-image-2.6.29.6linux-2.6.29.6
make[1]: entrant dans le répertoire « /usr/src/linux-2.6.29.6 »
====== making target debian/stamp/install/linux-image-2.6.29.6linux-2.6.29.6 [new prereqs: ]======
This is kernel package version 11.015.
rm -f -r .//usr/src/linux-2.6.29.6/debian/linux-image-2.6.29.6linux-2.6.29.6 .//usr/src/linux-2.6.29.6/debian/linux-image-2.6.29.6linux-2.6.29.6.deb
install -p -d -o root -g root  -m  755 /usr/src/linux-2.6.29.6/debian/linux-image-2.6.29.6linux-2.6.29.6//boot
install: cannot change owner and permissions of `/usr/src/linux-2.6.29.6/debian/linux-image-2.6.29.6linux-2.6.29.6//boot': Opération non permise
make[1]: *** [debian/stamp/install/linux-image-2.6.29.6linux-2.6.29.6] Erreur 1
make[1]: quittant le répertoire « /usr/src/linux-2.6.29.6 »
make: *** [kernel_image] Erreur 2

je pensait qu'en mettant les droits d'un dossier en l'occurence /src dans /usr tout ce que j'importait dedans j'en était le proprietaire mais on dirait que non...
bon personne pour de l'aide?
en tout cas c'est pas le même message qu'hier.....

bob031 · Answer

bon ben si on faisait une petite pause pour réfléchir :

quel est ton noyau actuel et ton achitecture (commande uname -a) ?

quel est le noyau que tu souhaites installer ?

peux-tu redonner le lien (car celui que tu as donné ne fonctionne pas) de linuxmao ?

tu devrais supprimer tout ce que tu as fait pour repartir sur de nouvelles bases ....c'est-à-dire une compilation "à la mano"

et surtout expliquer pourquoi il te faut ce nouveau noyau = j'image qu'il faut que tu rajoutes de nouvelles options, voir de nouveaux modules ?

et c'est quoi cette histoire de patch sur le nouveau noyau .....

cece466 · Answer

salut BOB31
et merci de suivre..sisi y en a...
ben voila  je suis zicos (pianiste/clavieriste /et je travaille beaucoup avec des synthés virtuels.
j'ai besoin du réal-time pour se faire pour des raisons de latence (pour schematiser delai entre le temp ou j'enfonce la touche du synthé et le son qui en sort...
j'utilise une carte son professionelle en firewire une EDIROL FA-101.
mon noyeau actuel est le 2.6.28.14 sur ubuntu "normale".
je voudrais me compiler le noyau 2.6.29.6 et appliquer le patch RT 2.6.29.6-rt23..
je pense que ce tuto ci est incomplet car il ne parle pas des droits et est un peu fouilli..car redigé par plusieurs personnes  .
http://linuxmao.org/tiki-index.php?page=Tuto%20Compiler%20un%20noyau%20Temps-R%C3%A9el&structure=Accueil+Tutos&redirectpage=Tuto%20Compiler%20un%20noyau%20Temps-R%C3%A9el 
desolé pour la lecture...

aujourd'hui j'ai essayé ce tuto 
http://www.informatique-inside.com/forum/s169-tuto-changer-noyau-sous-ubuntu.html
et je pêche quasiment au même endroit ...
je pense qu'il s'agit d'un probléme de permission mais ne sait comment le resoudre ..
j'ai suivi pourtant a la lettre les 2 tutos..
voilà si tu arrives a me depatouiller je te tire mon chapeau...
je suis a 2 doigts de la crise epileptique..(non je plaisante mais c'est frustrant...

cece466 · Answer

uname -a
Linux cedric0-desktop 2.6.28-14-generic #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009 x86_64 GNU/Linux

bob031 · Answer

concernant les problèmes de permissions : tu lances bien toutes les commandes en root ?

cece466 · Answer

ben j'ai suivi à la lettre ce qui etait ecrit dans les 2 tutos par simple copier/coller...
c'est penible car des fois il mette la commande precedée de sudo et des fois non...
ce qui fait qu'on y perd son latin..
moi si tu veux tant qu'on ne me renvoie pas de message d'erreur je continue...
jusqu'a ce que ça coince....
donc d'aprés toi ce serait ça?
as tu lu les tutos ? te semblent t'-ils corrects?

bob031 · Answer

ha ben non !

il faut tout faire en root !!!! tu compiles un noyau, tout de même ! 

je ne dis pas que c'est forcément la source de tes ennuis mais .............. je crois que tu es bon pour une nouvelle compilation !!!

au fait : quelle est ta stratégie : noyau déjà patché ?

http://paulsundvall.blogspot.com/2008/11/compile-realtime-kernel-in-debian-lenny.html

cece466 · Answer

ok mettons que ce soit ça ...
là je réinstalle la 8.04 pour voire ....
je pense que le tuto de linuxmao est mieux car plus adapté  pour mon cas mais je le trouve fouilli quand même..
oui oui bon je sais c'est un sîte collaboratif mais bon...
perso moi l'informatique c'est pas tellement mon truc j'en  fait plus par necessité que par gout...
et quand je vois des fois passer uns semaine sur ce genre de probléme je me dis que la musique est bien loin de moi...
bon je te tiens au courant.....
au fait as tu lu les tutos que j'ai essayé ils te semblent corrects?

bob031 · Answer

oui ! oui ! j'ai vu les tutos ! 

de toute façon il n'y a pas 36 manières de compiler.

c'est : make menuconfig && make && make modules_install


là je réinstalle la 8.04 pour voire 

pas sûr d'avoir bien compris, tu réinstalles Ubuntu ?

cece466 · Answer

oui figure toi que je viens de réinstaller ubuntu studio 8.04 avec juste le minimum syndical c'est a dire juste le bureau pour compiler moi même a la main les logiciels qui me sont indispensables et au premier redemarage 
erreur 22 ...
je pense qu'il n'a pas aimé que je le remette en ext3 (elle etait en ext4...)
bon allez derniere tentative avec la 9.04 ....et je passe toutes les commandes avec sudo...
je te tiens au courant....

bob031 · Answer

ok ! 

surtout tiens toi qu'à un seul tuto et rapporte nous le maximum d'informations concernant les erreurs .....

takefive · Answer

Bonsoir,
Moi aussi j'ai eu besoin du RT pour faire de la musique alors j'ai installé par le gestionnaire de paquet,  2.6.27-3-rt . Ca a installé en même temps l'image et les headers.
Je suis sur Mint 6, certainement que le noyau n'est pas le même sur l'Ubuntu 9.04 mais il y a peut-être le RT adéquat.
Mais bon, ça fonctionne bien avec jack et ardour
C' était à titre informatif car je vois que tu veux  compiler....
Cordialement

cece466 · Answer

une petite question en passant dans le tuto
 http://linuxmao.org/tiki-index.php?page=Tuto%20Compiler%20un%20noyau%20Temps-R%C3%A9el&structure=Accueil+Tutos&redirectpage=Tuto%20Compiler%20un%20noyau%20Temps-R%C3%A9el 
dans la section  compilation et installation du noyau
cp System.map /boot/Votre_SYSTEM.MAP
_SYSTEM.MAP et la l'extension de la ligne de commande a rajouter aprés le nom?(je sais c'est bête mais bon quand on ne sais pas...
idem pour la commande en dessous avec _CONFIG

cece466 · Answer

1ére erreur:
sudo make xconfig
  CHECK   qt
sed < scripts/kconfig/lkc_proto.h > scripts/kconfig/lkc_defs.h 's/P($[^,]*$,.*/#define \1 (\*\1_p)/'
  HOSTCC  scripts/kconfig/kconfig_load.o
/usr/bin/moc -i scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc
  HOSTCXX scripts/kconfig/qconf.o
  HOSTLD  scripts/kconfig/qconf
scripts/kconfig/qconf arch/x86/Kconfig
cedric0@cedric0-desktop:/usr/src/linux$ sudo make menuconfig
  HOSTCC  scripts/kconfig/lxdialog/checklist.o
  HOSTCC  scripts/kconfig/lxdialog/inputbox.o
  HOSTCC  scripts/kconfig/lxdialog/menubox.o
  HOSTCC  scripts/kconfig/lxdialog/textbox.o
  HOSTCC  scripts/kconfig/lxdialog/util.o
  HOSTCC  scripts/kconfig/lxdialog/yesno.o
  HOSTCC  scripts/kconfig/mconf.o
  HOSTLD  scripts/kconfig/mconf
scripts/kconfig/mconf arch/x86/Kconfig
#
# configuration written to .config
#


*** End of Linux kernel configuration.
*** Execute 'make' to build the kernel or try 'make help'.

cedric0@cedric0-desktop:/usr/src/linux$ sudo make && make modules_install
scripts/kconfig/conf -s arch/x86/Kconfig
  CHK     include/linux/version.h
  UPD     include/linux/version.h
  CHK     include/linux/utsrelease.h
  UPD     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-x86
  CC      kernel/bounds.s
  GEN     include/linux/bounds.h
  CC      arch/x86/kernel/asm-offsets.s
  GEN     include/asm/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CC      scripts/mod/empty.o
  HOSTCC  scripts/mod/mk_elfconfig
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/modpost.o
scripts/mod/modpost.c: In function ‘get_markers’:
scripts/mod/modpost.c:1545: attention : ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
scripts/mod/modpost.c: In function ‘add_marker’:
scripts/mod/modpost.c:1965: attention : ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
  HOSTCC  scripts/mod/sumversion.o
  HOSTLD  scripts/mod/modpost
  HOSTCC  scripts/ihex2fw
scripts/ihex2fw.c: In function ‘output_records’:
scripts/ihex2fw.c:261: attention : ignoring return value of ‘write’, declared with attribute warn_unused_result
scripts/ihex2fw.c:266: attention : ignoring return value of ‘write’, declared with attribute warn_unused_result
  HOSTCC  scripts/kallsyms
scripts/kallsyms.c: In function ‘read_symbol’:
scripts/kallsyms.c:74: attention : ignoring return value of ‘fgets’, declared with attribute warn_unused_result
  HOSTCC  scripts/conmakehash
  HOSTCC  scripts/bin2c
  CC      init/main.o
init/main.c: In function ‘start_kernel’:
init/main.c:571: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  CC      init/do_mounts.o
  CC      init/do_mounts_initrd.o
  LD      init/mounts.o
  CC      init/initramfs.o
init/initramfs.c: In function ‘populate_rootfs’:
init/initramfs.c:531: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      init/calibrate.o
  LD      init/built-in.o
  HOSTCC  usr/gen_init_cpio
  GEN     usr/initramfs_data.cpio
  AS      usr/initramfs_data.o
  LD      usr/built-in.o
  CC      arch/x86/kernel/process_64.o
  CC      arch/x86/kernel/signal.o
  AS      arch/x86/kernel/entry_64.o
  CC      arch/x86/kernel/traps.o
  CC      arch/x86/kernel/irq.o
  CC      arch/x86/kernel/irq_64.o
  CC      arch/x86/kernel/dumpstack_64.o
  CC      arch/x86/kernel/time_64.o
  CC      arch/x86/kernel/ioport.o
  CC      arch/x86/kernel/ldt.o
  CC      arch/x86/kernel/dumpstack.o
arch/x86/kernel/dumpstack.c: In function ‘print_trace_warning_symbol’:
arch/x86/kernel/dumpstack.c:117: attention : le format n'est pas une chaîne littérale et pas d'argument de format
arch/x86/kernel/dumpstack.c: In function ‘print_trace_address’:
arch/x86/kernel/dumpstack.c:139: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      arch/x86/kernel/setup.o
  CC      arch/x86/kernel/i8259.o
  CC      arch/x86/kernel/irqinit_64.o
  CC      arch/x86/kernel/sys_x86_64.o
  CC      arch/x86/kernel/x8664_ksyms_64.o
  CC      arch/x86/kernel/syscall_64.o
  CC      arch/x86/kernel/vsyscall_64.o
  CC      arch/x86/kernel/bootflag.o
  CC      arch/x86/kernel/e820.o
arch/x86/kernel/e820.c: In function ‘early_panic’:
arch/x86/kernel/e820.c:1230: attention : le format n'est pas une chaîne littérale et pas d'argument de format
arch/x86/kernel/e820.c:1231: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      arch/x86/kernel/pci-dma.o
  CC      arch/x86/kernel/quirks.o
  CC      arch/x86/kernel/i8237.o
  CC      arch/x86/kernel/topology.o
  CC      arch/x86/kernel/kdebugfs.o
  CC      arch/x86/kernel/alternative.o
  CC      arch/x86/kernel/i8253.o
  CC      arch/x86/kernel/pci-nommu.o
  CC      arch/x86/kernel/tsc.o
  CC      arch/x86/kernel/io_delay.o
  CC      arch/x86/kernel/rtc.o
  CC      arch/x86/kernel/trampoline.o
  CC      arch/x86/kernel/process.o
  CC      arch/x86/kernel/i387.o
  CC      arch/x86/kernel/xsave.o
  CC      arch/x86/kernel/ptrace.o
  CC      arch/x86/kernel/ds.o
  CC      arch/x86/kernel/step.o
  LD      arch/x86/kernel/acpi/built-in.o
  CC      arch/x86/kernel/apic/apic.o
  CC      arch/x86/kernel/apic/probe_64.o
  CC      arch/x86/kernel/apic/ipi.o
  CC      arch/x86/kernel/apic/nmi.o
  CC      arch/x86/kernel/apic/io_apic.o
  CC      arch/x86/kernel/apic/apic_flat_64.o
  LD      arch/x86/kernel/apic/built-in.o
  CC      arch/x86/kernel/cpu/intel_cacheinfo.o
  CC      arch/x86/kernel/cpu/addon_cpuid_features.o
  CC      arch/x86/kernel/cpu/proc.o
  MKCAP   arch/x86/kernel/cpu/capflags.c
  CC      arch/x86/kernel/cpu/capflags.o
  CC      arch/x86/kernel/cpu/powerflags.o
  CC      arch/x86/kernel/cpu/common.o
  CC      arch/x86/kernel/cpu/vmware.o
  CC      arch/x86/kernel/cpu/hypervisor.o
  CC      arch/x86/kernel/cpu/bugs_64.o
  CC      arch/x86/kernel/cpu/intel.o
  CC      arch/x86/kernel/cpu/amd.o
  CC      arch/x86/kernel/cpu/centaur.o
  CC      arch/x86/kernel/cpu/perf_counter.o
  CC      arch/x86/kernel/cpu/perfctr-watchdog.o
  LD      arch/x86/kernel/cpu/built-in.o
  CC      arch/x86/kernel/reboot.o
  CC      arch/x86/kernel/early-quirks.o
  CC      arch/x86/kernel/smp.o
  CC      arch/x86/kernel/smpboot.o
  CC      arch/x86/kernel/tsc_sync.o
  CC      arch/x86/kernel/setup_percpu.o
  AS      arch/x86/kernel/trampoline_64.o
  CC      arch/x86/kernel/mpparse.o
  CC      arch/x86/kernel/early_printk.o
  CC      arch/x86/kernel/hpet.o
  CC      arch/x86/kernel/k8.o
  CC      arch/x86/kernel/pcspeaker.o
  CC      arch/x86/kernel/pci-swiotlb.o
  CC      arch/x86/kernel/pci-gart_64.o
  CC      arch/x86/kernel/aperture_64.o
  LD      arch/x86/kernel/built-in.o
  AS      arch/x86/kernel/head_64.o
  CC      arch/x86/kernel/head64.o
  CC      arch/x86/kernel/head.o
  CC      arch/x86/kernel/init_task.o
  LDS     arch/x86/kernel/vmlinux.lds
  CC      arch/x86/mm/init.o
  CC      arch/x86/mm/init_64.o
  CC      arch/x86/mm/fault.o
  CC      arch/x86/mm/ioremap.o
  CC      arch/x86/mm/extable.o
  CC      arch/x86/mm/pageattr.o
  CC      arch/x86/mm/mmap.o
  CC      arch/x86/mm/pat.o
  CC      arch/x86/mm/pgtable.o
  CC      arch/x86/mm/gup.o
  CC      arch/x86/mm/tlb.o
  LD      arch/x86/mm/built-in.o
  LD      arch/x86/crypto/built-in.o
  CC      arch/x86/vdso/vma.o
  LDS     arch/x86/vdso/vdso.lds
  AS      arch/x86/vdso/vdso-note.o
  CC      arch/x86/vdso/vclock_gettime.o
  CC      arch/x86/vdso/vgetcpu.o
  CC      arch/x86/vdso/vvar.o
  VDSO    arch/x86/vdso/vdso.so.dbg
  OBJCOPY arch/x86/vdso/vdso.so
  AS      arch/x86/vdso/vdso.o
  VDSOSYM arch/x86/vdso/vdso-syms.lds
  LD      arch/x86/vdso/built-in.o
  CC      kernel/sched.o
  CC      kernel/fork.o
kernel/fork.c:1819: attention : ‘takeover_delayed_drop’ defined but not used
  CC      kernel/exec_domain.o
  CC      kernel/panic.o
  CC      kernel/printk.o
  CC      kernel/cpu.o
  CC      kernel/exit.o
  CC      kernel/itimer.o
  TIMEC   kernel/timeconst.h
  CC      kernel/time.o
  CC      kernel/softirq.o
  CC      kernel/resource.o
  CC      kernel/sysctl.o
kernel/sysctl.c:100: attention : ‘one’ defined but not used
  CC      kernel/capability.o
  CC      kernel/ptrace.o
  CC      kernel/timer.o
  CC      kernel/user.o
  CC      kernel/signal.o
  CC      kernel/sys.o
  CC      kernel/kmod.o
  CC      kernel/workqueue.o
  CC      kernel/pid.o
  CC      kernel/rcupdate.o
  CC      kernel/extable.o
  CC      kernel/params.o
  CC      kernel/posix-timers.o
  CC      kernel/kthread.o
  CC      kernel/wait.o
  CC      kernel/kfifo.o
  CC      kernel/sys_ni.o
  CC      kernel/posix-cpu-timers.o
  CC      kernel/hrtimer.o
  CC      kernel/rwsem.o
  CC      kernel/nsproxy.o
  CC      kernel/srcu.o
  CC      kernel/semaphore.o
  CC      kernel/notifier.o
  CC      kernel/ksysfs.o
  CC      kernel/pm_qos_params.o
  CC      kernel/sched_clock.o
  CC      kernel/cred.o
  CC      kernel/async.o
  CC      kernel/freezer.o
  CC      kernel/irq/handle.o
  CC      kernel/irq/manage.o
  CC      kernel/irq/spurious.o
  CC      kernel/irq/resend.o
  CC      kernel/irq/chip.o
  CC      kernel/irq/devres.o
  CC      kernel/irq/autoprobe.o
  CC      kernel/irq/proc.o
  CC      kernel/irq/migration.o
  LD      kernel/irq/built-in.o
  CC      kernel/power/process.o
  LD      kernel/power/built-in.o
  CC      kernel/time/timekeeping.o
  CC      kernel/time/ntp.o
  CC      kernel/time/clocksource.o
  CC      kernel/time/jiffies.o
  CC      kernel/time/timer_list.o
  CC      kernel/time/clockevents.o
  CC      kernel/time/tick-common.o
  CC      kernel/time/tick-broadcast.o
  CC      kernel/time/tick-oneshot.o
  CC      kernel/time/tick-sched.o
  LD      kernel/time/built-in.o
  CC      kernel/futex.o
  CC      kernel/rtmutex.o
  CC      kernel/rt.o
  CC      kernel/dma.o
  CC      kernel/smp.o
  CC      kernel/spinlock.o
  CC      kernel/kallsyms.o
  CC      kernel/acct.o
  CC      kernel/cgroup.o
  CC      kernel/cgroup_debug.o
  CC      kernel/cgroup_freezer.o
  CC      kernel/ns_cgroup.o
  GZIP    kernel/config_data.gz
  IKCFG   kernel/config_data.h
  CC      kernel/configs.o
  CC      kernel/res_counter.o
  CC      kernel/seccomp.o
  CC      kernel/rcupreempt.o
  CC      kernel/rcupreempt_trace.o
  CC      kernel/relay.o
  CC      kernel/utsname_sysctl.o
  CC      kernel/sched_cpupri.o
  CC      kernel/perf_counter.o
  LD      kernel/built-in.o
  CC      mm/bootmem.o
  CC      mm/filemap.o
  CC      mm/mempool.o
  CC      mm/oom_kill.o
  CC      mm/fadvise.o
  CC      mm/maccess.o
  CC      mm/page_alloc.o
  CC      mm/page-writeback.o
  CC      mm/pdflush.o
  CC      mm/readahead.o
  CC      mm/swap.o
  CC      mm/truncate.o
  CC      mm/vmscan.o
  CC      mm/shmem.o
  CC      mm/prio_tree.o
  CC      mm/util.o
  CC      mm/mmzone.o
  CC      mm/vmstat.o
  CC      mm/backing-dev.o
  CC      mm/page_isolation.o
  CC      mm/mm_init.o
  CC      mm/fremap.o
  CC      mm/highmem.o
  CC      mm/madvise.o
  CC      mm/memory.o
  CC      mm/mincore.o
  CC      mm/mlock.o
  CC      mm/mmap.o
  CC      mm/mprotect.o
  CC      mm/mremap.o
  CC      mm/msync.o
  CC      mm/rmap.o
  CC      mm/vmalloc.o
  CC      mm/pagewalk.o
  CC      mm/bounce.o
  CC      mm/page_io.o
  CC      mm/swap_state.o
  CC      mm/swapfile.o
  CC      mm/thrash.o
  CC      mm/dmapool.o
  CC      mm/sparse.o
  CC      mm/sparse-vmemmap.o
  CC      mm/slab.o
  CC      mm/percpu.o
  CC      mm/memcontrol.o
  CC      mm/page_cgroup.o
  LD      mm/built-in.o
  CC      fs/open.o
  CC      fs/read_write.o
  CC      fs/file_table.o
  CC      fs/super.o
  CC      fs/char_dev.o
  CC      fs/stat.o
  CC      fs/exec.o
  CC      fs/pipe.o
  CC      fs/namei.o
  CC      fs/fcntl.o
  CC      fs/ioctl.o
  CC      fs/readdir.o
  CC      fs/select.o
  CC      fs/fifo.o
  CC      fs/dcache.o
  CC      fs/inode.o
  CC      fs/attr.o
  CC      fs/bad_inode.o
  CC      fs/file.o
  CC      fs/filesystems.o
  CC      fs/namespace.o
  CC      fs/seq_file.o
  CC      fs/xattr.o
  CC      fs/libfs.o
  CC      fs/fs-writeback.o
  CC      fs/pnode.o
  CC      fs/drop_caches.o
  CC      fs/splice.o
  CC      fs/sync.o
  CC      fs/utimes.o
  CC      fs/stack.o
  CC      fs/fs_struct.o
  CC      fs/buffer.o
  CC      fs/bio.o
  CC      fs/block_dev.o
  CC      fs/direct-io.o
  CC      fs/mpage.o
  CC      fs/ioprio.o
  CC      fs/debugfs/inode.o
  CC      fs/debugfs/file.o
  LD      fs/debugfs/debugfs.o
  LD      fs/debugfs/built-in.o
  CC      fs/devpts/inode.o
  LD      fs/devpts/devpts.o
  LD      fs/devpts/built-in.o
  CC      fs/ext3/balloc.o
  CC      fs/ext3/bitmap.o
  CC      fs/ext3/dir.o
  CC      fs/ext3/file.o
  CC      fs/ext3/fsync.o
  CC      fs/ext3/ialloc.o
  CC      fs/ext3/inode.o
  CC      fs/ext3/ioctl.o
  CC      fs/ext3/namei.o
  CC      fs/ext3/super.o
  CC      fs/ext3/symlink.o
  CC      fs/ext3/hash.o
  CC      fs/ext3/resize.o
  CC      fs/ext3/ext3_jbd.o
  CC      fs/ext3/xattr.o
  CC      fs/ext3/xattr_user.o
  CC      fs/ext3/xattr_trusted.o
  LD      fs/ext3/ext3.o
  LD      fs/ext3/built-in.o
  CC      fs/jbd/transaction.o
  CC      fs/jbd/commit.o
  CC      fs/jbd/recovery.o
  CC      fs/jbd/checkpoint.o
  CC      fs/jbd/revoke.o
  CC      fs/jbd/journal.o
  LD      fs/jbd/jbd.o
  LD      fs/jbd/built-in.o
  CC      fs/notify/dnotify/dnotify.o
  LD      fs/notify/dnotify/built-in.o
  CC      fs/notify/inotify/inotify.o
  CC      fs/notify/inotify/inotify_user.o
  LD      fs/notify/inotify/built-in.o
  LD      fs/notify/built-in.o
  CC      fs/partitions/check.o
fs/partitions/check.c: In function ‘register_disk’:
fs/partitions/check.c:459: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      fs/partitions/msdos.o
  LD      fs/partitions/built-in.o
  CC      fs/proc/mmu.o
  CC      fs/proc/task_mmu.o
  CC      fs/proc/inode.o
  CC      fs/proc/root.o
  CC      fs/proc/base.o
  CC      fs/proc/generic.o
  CC      fs/proc/array.o
  CC      fs/proc/proc_tty.o
  CC      fs/proc/cmdline.o
  CC      fs/proc/cpuinfo.o
  CC      fs/proc/devices.o
  CC      fs/proc/interrupts.o
  CC      fs/proc/loadavg.o
  CC      fs/proc/meminfo.o
  CC      fs/proc/stat.o
  CC      fs/proc/uptime.o
  CC      fs/proc/version.o
  CC      fs/proc/proc_sysctl.o
  CC      fs/proc/kmsg.o
  CC      fs/proc/page.o
  LD      fs/proc/proc.o
  LD      fs/proc/built-in.o
  CC      fs/ramfs/inode.o
  CC      fs/ramfs/file-mmu.o
  LD      fs/ramfs/ramfs.o
  LD      fs/ramfs/built-in.o
  CC      fs/sysfs/inode.o
  CC      fs/sysfs/file.o
  CC      fs/sysfs/dir.o
  CC      fs/sysfs/symlink.o
  CC      fs/sysfs/mount.o
  CC      fs/sysfs/bin.o
  CC      fs/sysfs/group.o
  LD      fs/sysfs/built-in.o
  CC      fs/eventpoll.o
  CC      fs/anon_inodes.o
  CC      fs/signalfd.o
  CC      fs/timerfd.o
  CC      fs/eventfd.o
  CC      fs/aio.o
  CC      fs/locks.o
  CC      fs/binfmt_script.o
  CC      fs/binfmt_elf.o
  CC      fs/mbcache.o
  LD      fs/built-in.o
  CC      ipc/util.o
  CC      ipc/msgutil.o
  CC      ipc/msg.o
  CC      ipc/sem.o
  CC      ipc/shm.o
  CC      ipc/ipcns_notifier.o
  CC      ipc/ipc_sysctl.o
  LD      ipc/built-in.o
  CC      security/commoncap.o
  CC      security/security.o
  CC      security/capability.o
  CC      security/device_cgroup.o
  LD      security/built-in.o
  LD      crypto/built-in.o
  CC      block/elevator.o
  CC      block/blk-core.o
  CC      block/blk-tag.o
  CC      block/blk-sysfs.o
  CC      block/blk-barrier.o
  CC      block/blk-settings.o
  CC      block/blk-ioc.o
  CC      block/blk-map.o
  CC      block/blk-exec.o
  CC      block/blk-merge.o
  CC      block/blk-softirq.o
  CC      block/blk-timeout.o
  CC      block/ioctl.o
  CC      block/genhd.o
  CC      block/scsi_ioctl.o
  CC      block/cmd-filter.o
  CC      block/noop-iosched.o
  CC      block/as-iosched.o
  CC      block/deadline-iosched.o
  CC      block/cfq-iosched.o
  LD      block/built-in.o
  CC      drivers/ata/libata-core.o
  CC      drivers/ata/libata-scsi.o
  CC      drivers/ata/libata-eh.o
  CC      drivers/ata/libata-sff.o
  CC      drivers/ata/libata-pmp.o
  LD      drivers/ata/libata.o
  LD      drivers/ata/built-in.o
  LD      drivers/auxdisplay/built-in.o
  CC      drivers/base/core.o
drivers/base/core.c: In function ‘__root_device_register’:
drivers/base/core.c:1250: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/base/sys.o
drivers/base/sys.c: In function ‘sysdev_class_register’:
drivers/base/sys.c:140: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/base/bus.o
  CC      drivers/base/dd.o
  CC      drivers/base/driver.o
  CC      drivers/base/class.o
  CC      drivers/base/platform.o
drivers/base/platform.c: In function ‘platform_device_add’:
drivers/base/platform.c:247: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/base/cpu.o
  CC      drivers/base/firmware.o
  CC      drivers/base/init.o
  CC      drivers/base/map.o
  CC      drivers/base/devres.o
  CC      drivers/base/attribute_container.o
drivers/base/attribute_container.c: In function ‘attribute_container_add_device’:
drivers/base/attribute_container.c:170: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/base/transport_class.o
  LD      drivers/base/power/built-in.o
  CC      drivers/base/dma-mapping.o
  CC      drivers/base/firmware_class.o
drivers/base/firmware_class.c: In function ‘fw_register_device’:
drivers/base/firmware_class.c:318: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/base/topology.o
  LD      drivers/base/built-in.o
  LD      drivers/block/built-in.o
  LD      drivers/cdrom/built-in.o
  CC      drivers/char/mem.o
drivers/char/mem.c: In function ‘chr_dev_init’:
drivers/char/mem.c:994: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/char/random.o
  CC      drivers/char/tty_io.o
drivers/char/tty_io.c: In function ‘tty_register_device’:
drivers/char/tty_io.c:2850: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/char/n_tty.o
  CC      drivers/char/tty_ioctl.o
  CC      drivers/char/tty_ldisc.o
  CC      drivers/char/tty_buffer.o
  CC      drivers/char/tty_port.o
  CC      drivers/char/pty.o
  CC      drivers/char/misc.o
  CC      drivers/char/vt_ioctl.o
  CC      drivers/char/vc_screen.o
  CC      drivers/char/selection.o
  CC      drivers/char/keyboard.o
  CC      drivers/char/consolemap.o
  CONMK   drivers/char/consolemap_deftbl.c
  CC      drivers/char/consolemap_deftbl.o
  CC      drivers/char/vt.o
  SHIPPED drivers/char/defkeymap.c
  CC      drivers/char/defkeymap.o
  CC      drivers/char/rtc.o
  CC      drivers/char/agp/backend.o
  CC      drivers/char/agp/frontend.o
  CC      drivers/char/agp/generic.o
  CC      drivers/char/agp/isoch.o
  LD      drivers/char/agp/agpgart.o
  CC      drivers/char/agp/amd64-agp.o
  LD      drivers/char/agp/built-in.o
  CC      drivers/char/hw_random/core.o
  LD      drivers/char/hw_random/rng-core.o
  CC      drivers/char/hw_random/intel-rng.o
drivers/char/hw_random/intel-rng.c: In function ‘intel_init_hw_struct’:
drivers/char/hw_random/intel-rng.c:315: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/char/hw_random/amd-rng.o
  LD      drivers/char/hw_random/built-in.o
  LD      drivers/char/built-in.o
  LD      drivers/clocksource/built-in.o
  CC      drivers/firmware/dmi_scan.o
  CC      drivers/firmware/dmi-id.o
  CC      drivers/firmware/memmap.o
  LD      drivers/firmware/built-in.o
  LD      drivers/gpio/built-in.o
  LD      drivers/gpu/drm/built-in.o
  LD      drivers/gpu/built-in.o
  CC      drivers/hid/hid-core.o
  CC      drivers/hid/hid-input.o
  CC      drivers/hid/hid-debug.o
  LD      drivers/hid/hid.o
  LD      drivers/hid/built-in.o
  CC [M]  drivers/hid/hid-dummy.o
  CC      drivers/hwmon/hwmon.o
  LD      drivers/hwmon/built-in.o
  LD      drivers/i2c/algos/built-in.o
  LD      drivers/i2c/busses/built-in.o
  LD      drivers/i2c/chips/built-in.o
  LD      drivers/i2c/built-in.o
  LD      drivers/idle/built-in.o
  CC      drivers/ieee1394/ieee1394_core.o
  CC      drivers/ieee1394/ieee1394_transactions.o
  CC      drivers/ieee1394/hosts.o
  CC      drivers/ieee1394/highlevel.o
  CC      drivers/ieee1394/csr.o
  CC      drivers/ieee1394/nodemgr.o
  CC      drivers/ieee1394/dma.o
  CC      drivers/ieee1394/iso.o
  CC      drivers/ieee1394/csr1212.o
  CC      drivers/ieee1394/config_roms.o
  LD      drivers/ieee1394/ieee1394.o
  CC      drivers/ieee1394/ohci1394.o
  CC      drivers/ieee1394/video1394.o
  CC      drivers/ieee1394/raw1394.o
  LD      drivers/ieee1394/built-in.o
  CC      drivers/input/input.o
  CC      drivers/input/input-compat.o
  CC      drivers/input/ff-core.o
  LD      drivers/input/input-core.o
  CC      drivers/input/mousedev.o
drivers/input/mousedev.c: In function ‘mousedev_create’:
drivers/input/mousedev.c:881: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/input/keyboard/atkbd.o
  LD      drivers/input/keyboard/built-in.o
  CC      drivers/input/mouse/psmouse-base.o
  CC      drivers/input/mouse/synaptics.o
  CC      drivers/input/mouse/alps.o
  CC      drivers/input/mouse/logips2pp.o
  CC      drivers/input/mouse/lifebook.o
  CC      drivers/input/mouse/trackpoint.o
  LD      drivers/input/mouse/psmouse.o
  LD      drivers/input/mouse/built-in.o
  LD      drivers/input/built-in.o
  CC      drivers/input/serio/serio.o
  CC      drivers/input/serio/i8042.o
  CC      drivers/input/serio/serport.o
  CC      drivers/input/serio/libps2.o
  LD      drivers/input/serio/built-in.o
  LD      drivers/lguest/built-in.o
  LD      drivers/macintosh/built-in.o
  LD      drivers/media/common/tuners/built-in.o
  LD      drivers/media/common/built-in.o
  LD      drivers/media/radio/built-in.o
  CC      drivers/media/video/v4l2-dev.o
  CC      drivers/media/video/v4l2-ioctl.o
  CC      drivers/media/video/v4l2-device.o
  CC      drivers/media/video/v4l2-subdev.o
  LD      drivers/media/video/videodev.o
  CC      drivers/media/video/v4l2-int-device.o
  CC      drivers/media/video/v4l2-common.o
drivers/media/video/v4l2-common.c: In function ‘v4l2_ctrl_query_fill’:
drivers/media/video/v4l2-common.c:558: attention : le format n'est pas une chaîne littérale et pas d'argument de format
drivers/media/video/v4l2-common.c: In function ‘v4l2_ctrl_query_menu’:
drivers/media/video/v4l2-common.c:723: attention : le format n'est pas une chaîne littérale et pas d'argument de format
drivers/media/video/v4l2-common.c: In function ‘v4l2_ctrl_query_menu_valid_items’:
drivers/media/video/v4l2-common.c:741: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      drivers/media/video/v4l1-compat.o
  LD      drivers/media/video/built-in.o
  LD      drivers/media/built-in.o
  LD      drivers/mfd/built-in.o
  LD      drivers/misc/eeprom/built-in.o
  LD      drivers/misc/built-in.o
  LD      drivers/net/wireless/built-in.o
  LD      drivers/net/built-in.o
  CC      drivers/pci/access.o
  CC      drivers/pci/bus.o
  CC      drivers/pci/probe.o
  CC      drivers/pci/remove.o
  CC      drivers/pci/pci.o
  CC      drivers/pci/quirks.o
  CC      drivers/pci/slot.o
  CC      drivers/pci/pci-driver.o
  CC      drivers/pci/search.o
  CC      drivers/pci/pci-sysfs.o
  CC      drivers/pci/rom.o
  CC      drivers/pci/setup-res.o
  CC      drivers/pci/irq.o
  CC      drivers/pci/proc.o
  CC      drivers/pci/hotplug.o
  CC      drivers/pci/htirq.o
  CC      drivers/pci/setup-bus.o
  LD      drivers/pci/built-in.o
  LD      drivers/platform/x86/built-in.o
  LD      drivers/platform/built-in.o
  CC      drivers/scsi/scsi.o
  CC      drivers/scsi/hosts.o
  CC      drivers/scsi/scsi_ioctl.o
  CC      drivers/scsi/constants.o
  CC      drivers/scsi/scsicam.o
  CC      drivers/scsi/scsi_error.o
  CC      drivers/scsi/scsi_lib.o
  CC      drivers/scsi/scsi_lib_dma.o
  CC      drivers/scsi/scsi_scan.o
  CC      drivers/scsi/scsi_sysfs.o
  CC      drivers/scsi/scsi_devinfo.o
  CC      drivers/scsi/scsi_sysctl.o
  CC      drivers/scsi/scsi_proc.o
  LD      drivers/scsi/scsi_mod.o
  LD      drivers/scsi/built-in.o
  LD      drivers/serial/built-in.o
  CC      drivers/usb/host/pci-quirks.o
  LD      drivers/usb/host/built-in.o
  LD      drivers/usb/built-in.o
  CC      drivers/video/fb_notify.o
  LD      drivers/video/backlight/built-in.o
  CC      drivers/video/console/dummycon.o
  CC      drivers/video/console/vgacon.o
  LD      drivers/video/console/built-in.o
  LD      drivers/video/display/built-in.o
  LD      drivers/video/built-in.o
  LD      drivers/built-in.o
  CC      sound/sound_core.o
sound/sound_core.c: In function ‘sound_insert_unit’:
sound/sound_core.c:225: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  LD      sound/soundcore.o
  CC      sound/sound_firmware.o
  LD      sound/arm/built-in.o
  CC      sound/core/sound.o
  CC      sound/core/init.o
  CC      sound/core/memory.o
  CC      sound/core/info.o
  CC      sound/core/control.o
  CC      sound/core/misc.o
  CC      sound/core/device.o
  CC      sound/core/isadma.o
  LD      sound/core/snd.o
  LD      sound/core/built-in.o
  LD      sound/drivers/mpu401/built-in.o
  LD      sound/drivers/opl3/built-in.o
  LD      sound/drivers/opl4/built-in.o
  LD      sound/drivers/pcsp/built-in.o
  LD      sound/drivers/vx/built-in.o
  LD      sound/drivers/built-in.o
  LD      sound/i2c/other/built-in.o
  LD      sound/i2c/built-in.o
  LD      sound/isa/ad1816a/built-in.o
  LD      sound/isa/ad1848/built-in.o
  LD      sound/isa/cs423x/built-in.o
  LD      sound/isa/es1688/built-in.o
  LD      sound/isa/gus/built-in.o
  LD      sound/isa/opti9xx/built-in.o
  LD      sound/isa/sb/built-in.o
  LD      sound/isa/wavefront/built-in.o
  LD      sound/isa/wss/built-in.o
  LD      sound/isa/built-in.o
  LD      sound/mips/built-in.o
  LD      sound/oss/built-in.o
  LD      sound/parisc/built-in.o
  LD      sound/pci/ac97/built-in.o
  LD      sound/pci/ali5451/built-in.o
  LD      sound/pci/au88x0/built-in.o
  LD      sound/pci/aw2/built-in.o
  LD      sound/pci/ca0106/built-in.o
  LD      sound/pci/cs46xx/built-in.o
  LD      sound/pci/cs5535audio/built-in.o
  LD      sound/pci/echoaudio/built-in.o
  LD      sound/pci/emu10k1/built-in.o
  LD      sound/pci/hda/built-in.o
  LD      sound/pci/ice1712/built-in.o
  LD      sound/pci/korg1212/built-in.o
  LD      sound/pci/mixart/built-in.o
  LD      sound/pci/nm256/built-in.o
  LD      sound/pci/oxygen/built-in.o
  LD      sound/pci/pcxhr/built-in.o
  LD      sound/pci/riptide/built-in.o
  LD      sound/pci/rme9652/built-in.o
  LD      sound/pci/trident/built-in.o
  LD      sound/pci/vx222/built-in.o
  LD      sound/pci/ymfpci/built-in.o
  LD      sound/pci/built-in.o
  LD      sound/pcmcia/pdaudiocf/built-in.o
  LD      sound/pcmcia/vx/built-in.o
  LD      sound/pcmcia/built-in.o
  LD      sound/ppc/built-in.o
  LD      sound/sh/built-in.o
  LD      sound/soc/built-in.o
  LD      sound/sparc/built-in.o
  LD      sound/spi/built-in.o
  LD      sound/synth/built-in.o
  LD      sound/usb/caiaq/built-in.o
  LD      sound/usb/usx2y/built-in.o
  LD      sound/usb/built-in.o
  CC      sound/last.o
  LD      sound/built-in.o
  LD      firmware/built-in.o
  CC      arch/x86/pci/i386.o
  CC      arch/x86/pci/init.o
  CC      arch/x86/pci/direct.o
  CC      arch/x86/pci/fixup.o
  CC      arch/x86/pci/legacy.o
  CC      arch/x86/pci/irq.o
  CC      arch/x86/pci/common.o
  CC      arch/x86/pci/early.o
  CC      arch/x86/pci/amd_bus.o
  LD      arch/x86/pci/built-in.o
  CC      net/nonet.o
  LD      net/wireless/built-in.o
  LD      net/built-in.o
  CC      lib/bcd.o
  CC      lib/div64.o
  CC      lib/sort.o
  CC      lib/parser.o
  CC      lib/halfmd4.o
  CC      lib/debug_locks.o
  CC      lib/random32.o
  CC      lib/bust_spinlocks.o
  CC      lib/hexdump.o
  CC      lib/kasprintf.o
  CC      lib/bitmap.o
  CC      lib/scatterlist.o
  CC      lib/string_helpers.o
  CC      lib/iomap.o
  CC      lib/iomap_copy.o
  CC      lib/devres.o
  CC      lib/plist.o
  CC      lib/rwsem-spinlock.o
  CC      lib/hweight.o
  CC      lib/kernel_lock.o
  CC      lib/bitrev.o
  HOSTCC  lib/gen_crc32table
  GEN     lib/crc32table.h
  CC      lib/crc32.o
  CC      lib/zlib_inflate/inffast.o
  CC      lib/zlib_inflate/inflate.o
  CC      lib/zlib_inflate/infutil.o
  CC      lib/zlib_inflate/inftrees.o
  CC      lib/zlib_inflate/inflate_syms.o
  LD      lib/zlib_inflate/zlib_inflate.o
  LD      lib/zlib_inflate/built-in.o
  CC      lib/percpu_counter.o
  CC      lib/swiotlb.o
  CC      lib/iommu-helper.o
  CC      lib/syscall.o
  LD      lib/built-in.o
  CC      lib/argv_split.o
  CC      lib/bug.o
  CC      lib/cmdline.o
  CC      lib/cpumask.o
  CC      lib/ctype.o
  CC      lib/dec_and_lock.o
  CC      lib/decompress.o
  CC      lib/decompress_inflate.o
  CC      lib/dump_stack.o
  CC      lib/extable.o
  CC      lib/find_last_bit.o
  CC      lib/find_next_bit.o
  CC      lib/idr.o
  CC      lib/int_sqrt.o
  CC      lib/ioremap.o
  CC      lib/irq_regs.o
  CC      lib/is_single_threaded.o
  CC      lib/klist.o
  CC      lib/kobject.o
lib/kobject.c: In function ‘kset_create’:
lib/kobject.c:797: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      lib/kobject_uevent.o
  CC      lib/kref.o
  CC      lib/prio_heap.o
  CC      lib/prio_tree.o
  CC      lib/proportions.o
  CC      lib/radix-tree.o
  CC      lib/ratelimit.o
  CC      lib/rbtree.o
  CC      lib/reciprocal_div.o
  CC      lib/sha1.o
  CC      lib/show_mem.o
  CC      lib/string.o
  CC      lib/vsprintf.o
  AR      lib/lib.a
  CC      arch/x86/lib/msr-on-cpu.o
  CC      arch/x86/lib/io_64.o
  AS      arch/x86/lib/iomap_copy_64.o
  LD      arch/x86/lib/built-in.o
  AS      arch/x86/lib/clear_page_64.o
  AS      arch/x86/lib/copy_page_64.o
  AS      arch/x86/lib/copy_user_64.o
  AS      arch/x86/lib/copy_user_nocache_64.o
  AS      arch/x86/lib/csum-copy_64.o
  CC      arch/x86/lib/csum-partial_64.o
  CC      arch/x86/lib/csum-wrappers_64.o
  CC      arch/x86/lib/delay.o
  AS      arch/x86/lib/getuser.o
  AS      arch/x86/lib/memcpy_64.o
  CC      arch/x86/lib/memmove_64.o
  AS      arch/x86/lib/memset_64.o
  AS      arch/x86/lib/putuser.o
  AS      arch/x86/lib/rwlock_64.o
  AS      arch/x86/lib/thunk_64.o
  CC      arch/x86/lib/usercopy_64.o
  AR      arch/x86/lib/lib.a
  LD      vmlinux.o
  MODPOST vmlinux.o
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  CC      arch/x86/boot/a20.o
  CC      arch/x86/boot/cmdline.o
  AS      arch/x86/boot/copy.o
  HOSTCC  arch/x86/boot/mkcpustr
  CPUSTR  arch/x86/boot/cpustr.h
  CC      arch/x86/boot/cpu.o
  CC      arch/x86/boot/cpucheck.o
  CC      arch/x86/boot/edd.o
  AS      arch/x86/boot/compressed/head_64.o
  CC      arch/x86/boot/compressed/misc.o
  OBJCOPY arch/x86/boot/compressed/vmlinux.bin
  BZIP2    arch/x86/boot/compressed/vmlinux.bin.bz2
  LD      arch/x86/boot/compressed/piggy.o
  LD      arch/x86/boot/compressed/vmlinux
  OFFSETS arch/x86/boot/offsets.h
  AS      arch/x86/boot/header.o
  CC      arch/x86/boot/main.o
  CC      arch/x86/boot/mca.o
  CC      arch/x86/boot/memory.o
  CC      arch/x86/boot/pm.o
  AS      arch/x86/boot/pmjump.o
  CC      arch/x86/boot/printf.o
  CC      arch/x86/boot/string.o
  CC      arch/x86/boot/tty.o
  CC      arch/x86/boot/video.o
  CC      arch/x86/boot/video-mode.o
  CC      arch/x86/boot/version.o
  CC      arch/x86/boot/video-vga.o
  CC      arch/x86/boot/video-vesa.o
  CC      arch/x86/boot/video-bios.o
  LD      arch/x86/boot/setup.elf
  OBJCOPY arch/x86/boot/setup.bin
  OBJCOPY arch/x86/boot/vmlinux.bin
  HOSTCC  arch/x86/boot/tools/build
  BUILD   arch/x86/boot/bzImage
Root device is (8, 7)
Setup is 11148 bytes (padded to 11264 bytes).
System is 1193 kB
CRC c62edaab
Kernel: arch/x86/boot/bzImage is ready  (#1)

The present kernel configuration has modules disabled.
Type 'make config' and enable loadable module support.
Then build a kernel with module support enabled.

make: *** [modules_install] Erreur 1

Bizzare il me l'a jamais faite celle là...
bon je retourne faire un tour dans menuconfig...
et je retente...aprés un 
sudo make kpkg clean
je te dis la suite .....
pour moi là ce serait un probleme de configuration dans menuconfig...

bob031 · Answer

tu as réfléchi à l'idée de Takefive (post 28) et voir si ton gestionnaire de paquetages ne propose pas un noyau patché RT ?

peut-on avoir le résultat de la commande suivante :
ls -l /usr/src/

merci.

cece466 · Answer

bon ça plante au même endroit on dirait que c'est un module pas activé...

ls -l /usr/src
total 56200
lrwxrwxrwx  1 root    src        19 2009-08-04 20:34 linux -> linux-2.6.29.6-rt23
drwxrwxrwx 23 cedric0 src      4096 2009-08-04 21:49 linux-2.6.29.6-rt23
-rw-r--r--  1 cedric0 src  56550359 2009-07-03 01:43 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root    root     4096 2009-04-20 16:17 linux-headers-2.6.28-11
drwxr-xr-x  7 root    root     4096 2009-04-20 16:17 linux-headers-2.6.28-11-generic
drwxr-xr-x 22 root    root     4096 2009-08-04 19:59 linux-headers-2.6.28-14
drwxr-xr-x  7 root    root     4096 2009-08-04 19:59 linux-headers-2.6.28-14-generic
-rw-r--r--  1 cedric0 src    973050 2009-07-09 20:10 patch-2.6.29.6-rt23.bz2

bob031 · Answer

je crois qu'il y a un problème là :

drwxrwxrwx 23 cedric0 src 4096 2009-08-04 21:49 linux-2.6.29.6-rt23 

il faut que cela appartienne à root :
sudo chown root:root /usr/src/linux-2.6.29.6-rt23
puis, pour vérifier la modif ;
ls -l /usr/src/linux-2.6.29*
si ok, alors relancer la compilation ...

c'est peut-être ça le problème de permissions ....

cece466 · Answer

ls -l /usr/src/linux-2.6.29*
-rw-r--r--  1 cedric0 src  56550359 2009-07-03 01:43 /usr/src/linux-2.6.29.6.tar.bz2

/usr/src/linux-2.6.29.6-rt23:
total 9672
drwxrwsrwx 24 cedric0 src        4096 2009-08-04 21:47 arch
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:44 block
-rwxrwxrwx  1 cedric0 src       18693 2009-07-03 01:41 COPYING
-rwxrwxrwx  1 cedric0 src       93484 2009-07-03 01:41 CREDITS
drwxrwsrwx  3 cedric0 src        4096 2009-08-04 21:44 crypto
drwxrwsrwx 83 cedric0 src       12288 2009-08-04 20:32 Documentation
drwxrwsrwx 84 cedric0 src        4096 2009-08-04 21:46 drivers
drwxrwsrwx 23 cedric0 src        4096 2009-08-04 21:46 firmware ls -l /usr/src/linux-2.6.29*
-rw-r--r--  1 cedric0 src  56550359 2009-07-03 01:43 /usr/src/linux-2.6.29.6.tar.bz2

/usr/src/linux-2.6.29.6-rt23:
total 9672
drwxrwsrwx 24 cedric0 src        4096 2009-08-04 21:47 arch
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:44 block
-rwxrwxrwx  1 cedric0 src       18693 2009-07-03 01:41 COPYING
-rwxrwxrwx  1 cedric0 src       93484 2009-07-03 01:41 CREDITS
drwxrwsrwx  3 cedric0 src        4096 2009-08-04 21:44 crypto
drwxrwsrwx 83 cedric0 src       12288 2009-08-04 20:32 Documentation
drwxrwsrwx 84 cedric0 src        4096 2009-08-04 21:46 drivers
drwxrwsrwx 23 cedric0 src        4096 2009-08-04 21:46 firmware
drwxrwsrwx 65 cedric0 src       12288 2009-08-04 21:44 fs
drwxrwsrwx 28 cedric0 src        4096 2009-08-04 21:40 include
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:47 init
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:44 ipc
-rwxrwxrwx  1 cedric0 src        2430 2009-07-03 01:41 Kbuild
drwxrwsrwx  6 cedric0 src       12288 2009-08-04 21:42 kernel
drwxrwsrwx  6 cedric0 src       12288 2009-08-04 21:47 lib
-rwxrwxrwx  1 cedric0 cedric0  110285 2009-08-04 20:32 MAINTAINERS
-rwxrwxrwx  1 cedric0 cedric0   54924 2009-08-04 20:32 Makefile
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:42 mm
-rw-r--r--  1 root    root          0 2009-08-04 21:40 modules.order
-rw-r--r--  1 root    root          0 2009-08-04 21:47 Module.symvers
drwxrwsrwx 46 cedric0 src        4096 2009-08-04 21:46 net
-rwxrwxrwx  1 cedric0 src       17080 2009-07-03 01:41 README
-rwxrwxrwx  1 cedric0 src        3172 2009-07-03 01:41 REPORTING-BUGS
drwxrwsrwx  7 cedric0 src        4096 2009-07-03 01:41 samples
drwxrwsrwx 12 cedric0 src        4096 2009-08-04 21:40 scripts
drwxrwsrwx  5 cedric0 src        4096 2009-08-04 21:44 security
drwxrwsrwx 20 cedric0 src        4096 2009-08-04 21:46 sound
-rw-r--r--  1 root    root     514460 2009-08-04 21:47 System.map
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:40 usr
drwxrwsrwx  3 cedric0 src        4096 2009-07-03 01:41 virt
-rwxr-xr-x  1 root    root    9072364 2009-08-04 21:47 vmlinux
-rw-r--r--  1 root    root    5289743 2009-08-04 21:47 vmlinux.o

drwxrwsrwx 65 cedric0 src       12288 2009-08-04 21:44 fs
drwxrwsrwx 28 cedric0 src        4096 2009-08-04 21:40 include
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:47 init
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:44 ipc
-rwxrwxrwx  1 cedric0 src        2430 2009-07-03 01:41 Kbuild
drwxrwsrwx  6 cedric0 src       12288 2009-08-04 21:42 kernel
drwxrwsrwx  6 cedric0 src       12288 2009-08-04 21:47 lib
-rwxrwxrwx  1 cedric0 cedric0  110285 2009-08-04 20:32 MAINTAINERS
-rwxrwxrwx  1 cedric0 cedric0   54924 2009-08-04 20:32 Makefile
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:42 mm
-rw-r--r--  1 root    root          0 2009-08-04 21:40 modules.order
-rw-r--r--  1 root    root          0 2009-08-04 21:47 Module.symvers
drwxrwsrwx 46 cedric0 src        4096 2009-08-04 21:46 net
-rwxrwxrwx  1 cedric0 src       17080 2009-07-03 01:41 README
-rwxrwxrwx  1 cedric0 src        3172 2009-07-03 01:41 REPORTING-BUGS
drwxrwsrwx  7 cedric0 src        4096 2009-07-03 01:41 samples
drwxrwsrwx 12 cedric0 src        4096 2009-08-04 21:40 scripts
drwxrwsrwx  5 cedric0 src        4096 2009-08-04 21:44 security
drwxrwsrwx 20 cedric0 src        4096 2009-08-04 21:46 sound
-rw-r--r--  1 root    root     514460 2009-08-04 21:47 System.map
drwxrwsrwx  2 cedric0 src        4096 2009-08-04 21:40 usr
drwxrwsrwx  3 cedric0 src        4096 2009-07-03 01:41 virt
-rwxr-xr-x  1 root    root    9072364 2009-08-04 21:47 vmlinux
-rw-r--r--  1 root    root    5289743 2009-08-04 21:47 vmlinux.o

ok mais en tout cas tu penses que là c'est un probléme de droits il me dit pas ça tout de suite... 
les dernieres lignes de mon dernier message d'erreur...

BUILD arch/x86/boot/bzImage
Root device is (8, 7)
Setup is 11148 bytes (padded to 11264 bytes).
System is 1193 kB
CRC c62edaab
Kernel: arch/x86/boot/bzImage is ready (#1)

The present kernel configuration has modules disabled.
Type 'make config' and enable loadable module support.
Then build a kernel with module support enabled.

make: *** [modules_install] Erreur 1

on dirait qu'il me dit qu'un module n'est pas chargé....

cece466 · Answer

j'ai refait un sudo make-kpkg clean  et relancé la compile ...
sudo make && make modules_install
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/basic/docproc
  HOSTCC  scripts/basic/hash
  HOSTCC  scripts/kconfig/conf.o
scripts/kconfig/conf.c: In function ‘conf_askvalue’:
scripts/kconfig/conf.c:105: attention : ignoring return value of ‘fgets’, declared with attribute warn_unused_result
scripts/kconfig/conf.c: In function ‘conf_choice’:
scripts/kconfig/conf.c:307: attention : ignoring return value of ‘fgets’, declared with attribute warn_unused_result
  HOSTCC  scripts/kconfig/kxgettext.o
  SHIPPED scripts/kconfig/zconf.tab.c
  SHIPPED scripts/kconfig/lex.zconf.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf -s arch/x86/Kconfig
  CHK     include/linux/version.h
  UPD     include/linux/version.h
  CHK     include/linux/utsrelease.h
  UPD     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-x86
  CC      kernel/bounds.s
  GEN     include/linux/bounds.h
  CC      arch/x86/kernel/asm-offsets.s
  GEN     include/asm/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  HOSTCC  scripts/genksyms/genksyms.o
  SHIPPED scripts/genksyms/lex.c
  SHIPPED scripts/genksyms/parse.h
  SHIPPED scripts/genksyms/keywords.c
  HOSTCC  scripts/genksyms/lex.o
  SHIPPED scripts/genksyms/parse.c
  HOSTCC  scripts/genksyms/parse.o
  HOSTLD  scripts/genksyms/genksyms
  CC      scripts/mod/empty.o
  HOSTCC  scripts/mod/mk_elfconfig
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/modpost.o
scripts/mod/modpost.c: In function ‘get_markers’:
scripts/mod/modpost.c:1545: attention : ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
scripts/mod/modpost.c: In function ‘add_marker’:
scripts/mod/modpost.c:1965: attention : ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
  HOSTCC  scripts/mod/sumversion.o
  HOSTLD  scripts/mod/modpost
  HOSTCC  scripts/ihex2fw
scripts/ihex2fw.c: In function ‘output_records’:
scripts/ihex2fw.c:261: attention : ignoring return value of ‘write’, declared with attribute warn_unused_result
scripts/ihex2fw.c:266: attention : ignoring return value of ‘write’, declared with attribute warn_unused_result
  HOSTCC  scripts/kallsyms
scripts/kallsyms.c: In function ‘read_symbol’:
scripts/kallsyms.c:74: attention : ignoring return value of ‘fgets’, declared with attribute warn_unused_result
  HOSTCC  scripts/conmakehash
  HOSTCC  scripts/bin2c
  CC      init/main.o
init/main.c: In function ‘start_kernel’:
init/main.c:571: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  CC      init/do_mounts.o
  CC      init/do_mounts_initrd.o
  LD      init/mounts.o
  CC      init/initramfs.o
init/initramfs.c: In function ‘populate_rootfs’:
init/initramfs.c:531: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      init/calibrate.o
  LD      init/built-in.o
  HOSTCC  usr/gen_init_cpio
  /usr/src/linux-2.6.29.6-rt23/scripts/gen_initramfs_list.sh: Cannot open 'y'
make[1]: *** [usr/initramfs_data.cpio] Erreur 1
make: *** [usr] Erreur 2

bob031 · Answer

Type 'make config' and enable loadable module support. 

tapes ce qu'il te dit :
make config

cece466 · Answer

/usr/src/linux-2.6.29.6-rt23/scripts/gen_initramfs_list.sh: Cannot open 'y'
make[1]: *** [usr/initramfs_data.cpio] Erreur 1
make: *** [usr] Erreur 2

c'est quoi initramfs ?
c'est ça qui bloque je crois

cece466 · Answer

oui mais je prefere en mode graphique...
car mes connaissances sont un peu limité de ce coté...
sinon je suis obligé de refaire tout par menuconfig je prefere...

cece466 · Answer

bon j'ai modidié un truc..
et relancé..
init/initramfs.c:531: attention : le format n'est pas une chaîne littérale et pas d'argument de format
  CC      init/calibrate.o
  LD      init/built-in.o
  HOSTCC  usr/gen_init_cpio
  /usr/src/linux-2.6.29.6-rt23/scripts/gen_initramfs_list.sh: Cannot open 'y'
make[1]: *** [usr/initramfs_data.cpio.bz2] Erreur 1
make: *** [usr] Erreur 2

cece466 · Answer

bon ben j'ai modifié la conf et ça change rien au probleme...
marre pour ce soir je reviendrais faire un tour demain..
bonne fin de soirée et merci de ta patience..
cedric

cece466 · Answer

bon je t'avais postéen detail les manips que j'avais faites ce matin et...c'est pas passé pas grave..
je te donne mon ./conf :
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29.6-rt23
# Wed Aug  5 09:21:56 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ASM_SEMAPHORES=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_CPU_DEBUG=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_TESTS is not set

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLKDEVS is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set

#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_ATA_OVER_ETH is not set
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set

#
# EEPROM support
#
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=m
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
# CONFIG_IEEE1394_PCILYNX is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=m
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_PHONE=y

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_PCF8575 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y

#
# Memory mapped GPIO expanders:
#

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set

#
# PCI GPIO expanders:
#

#
# SPI GPIO expanders:
#
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_TEA5764 is not set
CONFIG_DAB=y

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
CONFIG_VGASTATE=m
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
CONFIG_SOUND_MPU401=m
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set

#
# Enable Host or Gadget support to see Inventra options
#

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# OTG and related infrastructure
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=m

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_PCBC is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

cece466 · Answer

en gros lors de la compilation il me disait que je n'avais pas les permissions pour /lib/modules
j'ai donc corrigé fait un :sudo make-kpkg clean et relancé la compilation...

bob031 · Answer

Salut,

ce fichier correspond à quel noyau ??

as-tu un fichier /boot/.config (qui correspondrait à ton noyau actuel)

+ les deux commandes suivantes
uname -r
ls -l /usr/src/

cece466 · Answer

salut Bob...
cedric0@cedric0-desktop:~$ uname -r
2.6.28-14-generic

et:

cedric0@cedric0-desktop:~$ ls -l /usr/src/
total 56200
lrwxrwxrwx  1 root    src        19 2009-08-05 08:25 linux -> linux-2.6.29.6-rt23
drwxrwsr-x 23 root    root     4096 2009-08-05 10:16 linux-2.6.29.6-rt23
-rw-r--r--  1 cedric0 root 56550359 2009-07-03 01:43 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root    root     4096 2009-04-20 16:17 linux-headers-2.6.28-11
drwxr-xr-x  7 root    root     4096 2009-04-20 16:17 linux-headers-2.6.28-11-generic
drwxr-xr-x 22 root    root     4096 2009-08-04 19:59 linux-headers-2.6.28-14
drwxr-xr-x  7 root    root     4096 2009-08-04 19:59 linux-headers-2.6.28-14-generic
-rw-r--r--  1 cedric0 src    973050 2009-07-09 20:10 patch-2.6.29.6-rt23.bz2

cece466 · Answer

non ou du moins pas trouvé de /boot/.config
ça compile et ça à l'air de bien se passer a priori..
merci encore de ton aide..
j'y suis depuis 7 heures ce matin et j'ai essayé de te poster mes manips en detail mais le message est pas passé...

bob031 · Answer

Salut,

bon ben on attend alors .....

cece466 · Answer

peux tu me disre si mes reglages sont bons ou du moin a peu prés corrects dans mes reglages de config matériel avac lspci? lspci 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6150SE nForce 430 (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) et lspci -v 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) Subsystem: Giga-byte Technology Device 5001 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) Subsystem: Giga-byte Technology Device 0c11 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) Subsystem: Giga-byte Technology Device 0c11 Flags: 66MHz, fast devsel, IRQ 5 I/O ports at b000 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) Subsystem: Giga-byte Technology Device 0c11 Flags: 66MHz, fast devsel 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at e5201000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20) Subsystem: Giga-byte Technology Device 5004 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at e5202000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci_hcd 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: e5000000-e50fffff Prefetchable memory behind bridge: e5100000-e51fffff Capabilities: 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Device f458:5002 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at f000 [size=16] Capabilities: Kernel driver in use: pata_amd 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) Subsystem: Giga-byte Technology Device e000 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 2303 Memory at e5203000 (32-bit, non-prefetchable) [size=4K] I/O ports at bc00 [size=8] Capabilities: Kernel driver in use: forcedeth Kernel modules: forcedeth 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device b002 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at d000 [size=16] Memory at e5204000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: sata_nv 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Device b002 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 I/O ports at 09e0 [size=8] I/O ports at 0be0 [size=4] I/O ports at 0960 [size=8] I/O ports at 0b60 [size=4] I/O ports at e400 [size=16] Memory at e5200000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: sata_nv 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6150SE nForce 430 (rev a2) Subsystem: Giga-byte Technology Device d000 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11 Memory at e2000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at e3000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 88000000 [disabled] [size=128K] Capabilities: Kernel modules: nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: Kernel driver in use: k8temp Kernel modules: k8temp 01:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. Device 13eb Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at e5100000 (32-bit, prefetchable) [size=4K] Capabilities: Kernel driver in use: bttv Kernel modules: bttv 01:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Hauppauge computer works Inc. Device 13eb Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at e5101000 (32-bit, prefetchable) [size=4K] Capabilities: Kernel driver in use: Bt87x Kernel modules: snd-bt87x 01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10) Subsystem: Giga-byte Technology Device 1000 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at e5004000 (32-bit, non-prefetchable) [size=2K] Memory at e5000000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394

cece466 · Answer

bizarre il me renvoie toujours ça :
mkdir: ne peut créer le répertoire `/lib/modules/2.6.29.6-rt23': Permission non accordée
make: *** [_modinst_] Erreur 1

cece466 · Answer

ah il y avait toujours le petit cadenas  sur le dossier linux-2.6.29.6-rt23
j'ai donc fait  :
sudo chown cedric0 linux-2.6.29.6-rt23
 et là il est plus là...
par contre sur le dossier linux il y est..donc je fait la meme..
ok plus de cadenas nul par ..
je retente...

lami20j · Answer

Salut,

Ben, je pense que ce soir je vais essayer de compiler ce noyau ;-)) sur mon Debian.

cece466 · Answer

salut lami20j
c 'est chaud les droits....
je suis ce poste...
et j'espére y arriver grace a vous ...

cece466 · Answer

au fait personne sait ou je peux trouver une doc en français sur les reglages et a quoi ils correspondent dans xconfig?
ça compile et cette fois j'espére que c'est la bonne....

cece466 · Answer

ben oui je sais les bonnes habitudes se perdent..surtout quand on ne pratique pas tous les jours ..
au fait tant qu'on y est a quoi sert la commande su nom d'utilisateur?

bob031 · Answer

ok ! si, par malheur, ta compilation plantait une nouvelle fois ..... je te suggère fortement d'attendre nos instructions pour faire une compilation "à la mano" après t'avoir indiquer comment tout nettoyer proprement.

tu laisseras tomber ton tuto que tu tentes de suivre et on fera la compilation "à la mano" ...

si lami20j est ok ....

lami20j · Answer

Re,

personne sait ou je peux trouver une doc en français sur les reglages et a quoi ils correspondent dans xconfig?
Ben, c'est déjà répondu ;-))

https://forums.commentcamarche.net/forum/affich-13260632-option-du-kernel#3
Pour télécharger en pdf https://forums.commentcamarche.net/forum/affich-13260632-option-du-kernel#5

A vrai dire, même si tu y arrives, avec tous ce bordel de sudo et compilation à la sauce de je ne sais pas qui, tu arriveras à le refaire sur un autre PC?!

Comme je l'ai dit, je vais essayer ce soir une compilation classique pour voir ce que ça donne ;-)

cece466 · Answer

bon me portez pas la poisse ça compile ..ça compile....marre de ce pb haha...
ls -l /boot/{vm,init}*
-rw-r--r-- 1 root root 7945263 2009-08-04 19:47 /boot/initrd.img-2.6.28-11-generic
-rw-r--r-- 1 root root 7955395 2009-08-04 20:05 /boot/initrd.img-2.6.28-14-generic
-rw-r--r-- 1 root root    1170 2009-04-17 05:39 /boot/vmcoreinfo-2.6.28-11-generic
-rw-r--r-- 1 root root    1170 2009-07-25 04:50 /boot/vmcoreinfo-2.6.28-14-generic
-rw-r--r-- 1 root root 3522336 2009-04-17 05:34 /boot/vmlinuz-2.6.28-11-generic
-rw-r--r-- 1 root root 3511008 2009-07-25 04:48 /boot/vmlinuz-2.6.28-14-generic

bob031 · Answer

ça compile ..ça compile

on croise les doigts .....

cece466 · Answer

et rebelote....
mkdir: ne peut créer le répertoire `/lib/modules/2.6.29.6-rt23': Permission non accordée
make: *** [_modinst_] Erreur 1
pourtant les droits sont bons partout il me semble....sauf pour les anciens noyaux
mais a priori je vois pas la rapport...

lami20j · Answer

Re,

Et rebelote.... 
A ce soir alors ;-))

cece466 · Answer

ok d'ailleur est ce possible de patcher le temp réel apres?

cece466 · Answer

deja je viens de voir que j'ai pas les permissions dans mon /lb/module actuel c'est peut être bien ça non?
puisque c'est une  c'est sur une installe deja existante...(je dis peut être une connerie?)

bob031 · Answer

peut-être ....

ok ! laisse tomber pour aujurd'hui on reprendra tout ça ce soir.

déjà on peut commencer à tout nettoyer :
sudo rm /usr/src/linux
sudo rm -Rf /usr/src/linux-2.6.29.6-rt23

ensuite, pour vérifier, tu redonnes un 
ls -l /usr/src/

et tu laisses tel quel jusqu'à ce soir, ok ?

bonne journée ..

cece466 · Answer

bon derniére tentative bis au passage un commande bien sympa...
chown -help me dit
sudo chown -hR cedric0 /dossier modifie le proprietaire du dossier et des sous dossiers ..
je retente donc ...ahlala c'est beau la perséverence...haha

bob031 · Answer

peut-être ....

il me semble que tu ne donnes pas les bons droits, si tu vérifies bien les répertoires doivent appartenir à "root src" alors que cela devrait-être "root root" (d'après la commande chmod que tu as donnée).

je suggère de profiter du reste de ta journée, et avec lami20j, on pourra reprendre tranquillement à zéro.

tu peux commencer déjà, pour repartir sur des bases plus saines, à "nettoyer" un peu :
rm /usr/src/linux
rm -Rf /usr/src/linux-image-2.6.29.6-rt23
mkdir /usr/src/linux
tar xvjf /usr/src/linux-image-2.6.29.6-rt23
ln -s /usr/src/linux-image-2.6.29.6-rt23 /usr/src/linux

et tu t'arrêtes là !!!

bonne journée

:-)

bob031 · Answer

tu devrais laisser tomber et attendre ce soir ...

cece466 · Answer

yo c'est passé...
je dois aller depanner un poteaux donc j'arréte là pour ce matin et windows me tend les bras 
avec racine windows>\systeme32
toskrnl.exe. au demarage je vous retrouve sur le sîte de chez lui a toute les amis..
cedric

cece466 · Answer

salut je suis vraiment crevé ce soir donc si on pouvait remattre ça a demain ce serait cool 
desolé ok?
+
et merci encore de l'aide...
cedric

bob031 · Answer

no problémo !!

:-)

lami20j · Answer

Salut,

Connexion en root pour effectuer toutes les opérations.
Je n'ai pas eu des erreurs.
J'ai utiliser le fichier .config-2.6.xxx de mon actuel noyau qui se trouve dans /boot
En revanche je n'ai pas fais des modifications quand j'ai fait menuconfig, ça c'est à toi de voir si c'est vraiment nécessaire, puisqu'en fait tu utiliseras la configuration actuelle que tu as sur ton pc, où je suppose tout est déjà reconnu.
Si tu dois faire des modifications particulières c'est pour un nouveau matériel par exemple qui n'était pas pris en compte sur ton noyau actuel, ou des modifications suite au patch pour ajouter des nouvels fonctionnements.
Si tu n'as pas mkinitramfs il faut installer initramfs-tools.

Et voilà la compilation.

sudo su -
cd /usr/src
rm -v linux
wget ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.6.tar.bz2
wget ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.6-rt23.bz2
tar xvjf linux-2.6.29.6.tar.bz2
bunzip2 patch-2.6.29.6-rt23.bz2
ln -sfn linux-2.6.29.6 linux
cd linux
patch -p1 < ../patch-2.6.29.6-rt23
cp -v /boot/config-$(uname -r) .config
make menuconfig
make && make modules_install
cp -v arch/i386/boot/bzImage /boot/vmlinuz-2.6.29.6
cp -v .config /boot/config-2.6.29.6
cp System.map /boot/System.map-2.6.29.6
mkinitramfs -o /boot/initrd.img-2.6.29.6  2.6.29.6-rt23
Le répertoie est dans /lib/modules
debian:~# ls -ld /lib/modules/*
drwxr-xr-x 3 root root 4096 mar 26 16:24 /lib/modules/2.6.26-1-686
drwxr-xr-x 4 root root 4096 jui  6 23:10 /lib/modules/2.6.26-2-686
drwxr-xr-x 3 root root 4096 aoû  6 00:13 /lib/modules/2.6.29.6-rt23
J'ai ajouté dans mon menu.lst les lignes suivantes (il faut adapter à ton cas).
Si jamais tu ne comprends pas, après la compilation tu nous diras et on va te montrer quoi mettre dans menu.lst
title           Debian GNU/Linux, kernel 2.6.29.6-rt
root            (hd0,8)
kernel          /boot/vmlinuz-2.6.29.6 root=/dev/hda9 ro quiet
initrd          /boot/initrd.img-2.6.29.6Et voici après redémarrage le noyau
debian:~# uname -r
2.6.29.6-rt23

cece466 · Answer

salut  lami20j
ok mais tu ne dis pas quel tuto tu utilises....?

kilian · Answer

Et si ça marche, dit nous si tu as des soucis au niveau du boot. On pourra arranger ça si tu nous donnes
le résultat de:

sudo lshw
sudo lspci -v
sudo lsusb
sudo fdisk -l

cece466 · Answer

celui là?
http://paulsundvall.blogspot.com/2008/11/compile-realtime-kernel-in-debian-lenny.html

cece466 · Answer

oups pardon j'avais pas vu la fin de ton message...
merci je teste...

cece466 · Answer

salut kilian..et merci lami20j
bon ça compile...
je t'envoie mon grub me dit rien, et confirme si je me plante :

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=4bb9f244-d183-49f1-b8d1-70ee214acb1c

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-14-generic
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro quiet splash 
initrd		/boot/initrd.img-2.6.28-14-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro  single
initrd		/boot/initrd.img-2.6.28-14-generic

title		Ubuntu 9.04, kernel 2.6.28-11-generic
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro  single
initrd		/boot/initrd.img-2.6.28-11-generic

title		Ubuntu 9.04, memtest86+
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title		Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title		Windows XP Professional x64 Edition
rootnoverify	(hd0,0)
savedefault
makeactive
chainloader	+1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title		Windows XP Professional x64 Edition
rootnoverify	(hd1,0)
savedefault
makeactive
map		(hd0) (hd1)
map		(hd1) (hd0)
chainloader	+1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.28-3-rt (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.28-3-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro quiet splash 
initrd		/boot/initrd.img-2.6.28-3-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.28-3-rt (recovery mode) (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.28-3-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro single 
initrd		/boot/initrd.img-2.6.28-3-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-24-rt (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-24-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro quiet splash 
initrd		/boot/initrd.img-2.6.24-24-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-24-rt (recovery mode) (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-24-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro single 
initrd		/boot/initrd.img-2.6.24-24-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-19-rt (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-19-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro quiet splash 
initrd		/boot/initrd.img-2.6.24-19-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, kernel 2.6.24-19-rt (recovery mode) (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/vmlinuz-2.6.24-19-rt root=UUID=f07eb81e-ebae-4688-82ac-e7e36efa9aab ro single 
initrd		/boot/initrd.img-2.6.24-19-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb3.
title		Ubuntu 9.04, memtest86+ (on /dev/sdb3)
root		(hd1,2)
kernel		/boot/memtest86+.bin  
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb4.
title		Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sdb4)
root		(hd1,3)
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=e68012a4-3033-44ae-b713-ed80aa9c984c ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb4.
title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sdb4)
root		(hd1,3)
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=e68012a4-3033-44ae-b713-ed80aa9c984c ro single 
initrd		/boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sdb4.
title		Ubuntu 9.04, memtest86+ (on /dev/sdb4)
root		(hd1,3)
kernel		/boot/memtest86+.bin  
savedefault
boot

d'apres moi il faut que je recopie ça en tête de la liste?

title		Ubuntu 9.04, cedric0 kernel 2.6.29.6-rt23
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/vmlinuz-2.6.29.6_rt23 root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro quiet splash 
initrd		/boot/initrd.img-2.6.29.6-rt23
quiet

title		Ubuntu 9.04, kernel 2.6.29.6-rt23 (recovery mode)
uuid		4bb9f244-d183-49f1-b8d1-70ee214acb1c
kernel		/boot/vmlinuz-2.6.29.6-rt23 root=UUID=4bb9f244-d183-49f1-b8d1-70ee214acb1c ro  single
initrd		/boot/initrd.img-2.6.29.6-rt23

est ce que c'est bon?
ça compile ...ça compile...

cece466 · Answer

l'uuid reste le même ?

lami20j · Answer

Re,

Ben, alors tu attends la fin de le compilation.
Ensuite tu afficheras le résultat dels -lt /boot ; ls -ld /lib/modules/*

cece466 · Answer

salut BOB31
ok bon on ne se moque pas svp aha...

bob031 · Answer

Hello,

je ne me moque pas ...... j'essaie d' " activer le processus " .... 

bon courage ...

:-)

cece466 · Answer

merci bob ...il en faut...
au fait pourquoi killian dit que le RTest moin performant que le "normal"?
en fait moi je voudrais essayerde faire marcher jackdmp avec libffado2 (qui prend en charge le Bi-proce pour le traitement du son  dans Qjackctl...)

lami20j · Answer

Re,

En fait j'ai oublié une étape très importante dans la compilation après la commande
make && make modules_install

Au lancement de cette commande il faut aller se préparer une grande tasse de café ou thé ou autre chose à boire et te déconnecter de CCM.
Si l'écran noir avec le défilement te plait alors regarde le sinon regarde autre chose, un film par exemple.
Ca prends de temps et tu ne risques pas de t'éparpiller.

Je ne plaisante pas.
Par exemple moi j'ai regardé à la télé pendant l'exécution de la commande ;-)

cece466 · Answer

alors c'est quoi la commande?
mais au fait y a un truc qui m'intrigue dans cette ligne de commande :
cp -v arch/i386/boot/bzImage /boot/vmlinuz-2.6.29.6
 
pourquoi "i386" alors que je suis en architecture 64 bit c'est pas plutôt "x86"?

cece466 · Answer

encore une question bête :
à quoi correspond (M) en face des modules qui défilent?
vide je sais ,* c'est activer mais (M)
comme c'est la m....?
ahah

lami20j · Answer

Re,

Affiche le résultat de ls -l arch/

cece466 · Answer

ls -l arch/
ne peux acceder aucun fichier ou dossier de ce type....

cece466 · Answer

non...bon je vais faire une course je re...

lami20j · Answer

Re,

Ben, reviens quand la commande est finie ;-) pour continuer.

cece466 · Answer

ouf a y est j'attend vos instructions manque une ligne de commande?

cece466 · Answer

mince j'avais pas vu ça recommence...
 H16TOFW firmware/vicam/firmware.fw
  IHEX    firmware/cpia2/stv0672_vp4.bin
mkdir: ne peut créer le répertoire `/lib/modules/2.6.29.6-rt23': Permission non accordée
make: *** [_modinst_] Erreur 1

bob031 · Answer

Re-,

c'est "marrant" tes problèmes de permissions !!

c'est pas logique !!!

tu es sensé être constamment en root : tu ne peux pas avoir de problèmes de permissions ....

est-ce que tu suis vraiment la procédure de lami20j de A à Z ???
et j'insiste, sans rajouter par toi-même des commandes type exit ou je ne sais quoi ? 

c'est pas normal !!!! tu ne devais pas avoir de problèmes de permissions ....

peux-tu afficher :
ls -l /lib/modules
merci.

cece466 · Answer

je te le donne mais j'ai deja modifié avec sudo chmod -R 755 /lib/modules ...
j'ai fait sudo make-dpkg clean et relancé sudo make_modules (la commande compléte...)
moi non plus je pige pas ....elle m'a l'air bizarre cette distrib....

cece466 · Answer

scuse ....ls -l /lib/modules
total 8
drwxr-xr-x 5 root root 4096 2009-08-06 09:23 2.6.28-11-generic
drwxr-xr-x 5 root root 4096 2009-08-06 08:06 2.6.28-14-generic
aprés que j'ai modifié les droits bien sur...

cece466 · Answer

je te dit ce qu'il en est aprés la nouvelle compil....y en a pour 1heure 30 a peu pres ...
moi tite sieste  car debut tôt est couché tard.....

bob031 · Answer

ok ! tu n'as qu'à créer ce fichu répertoire par toi-même et ceci en root !!!

donc tu te reconnectes en root (ou tu y restes si tu l'es [ commande id ou whoami pour vérifier)) et tu tapes :
mkdir /lib/modules/2.6.29.6-rt23

puis tu vérifies avec un :
ls -l /lib/modules
que les droits sont identiques avec les répertoires déjà contenus dans /lib/modules/


si c'est ok alors :
make clean
make && make modules_install
et tu vas passer à une autre activité (la compilation ne sera terminée, sauf exception d'erreurs, que lorsque le système te renverra le prompt).

qu'est-ce que le prompt ? c'est ceci :
> redfox@mandriva[192.168.1.2]:~$
bon ! le mien est un peu bidouillé, mais je pense que tu as compris ...

cece466 · Answer

ok mais j'arrête le compilation en cour alors?

cece466 · Answer

pour verifier j'ai fait comme tu m'as dit 
sudo mkdir linux-2.6.29.6-rt23

:/lib/modules$ ls -l /lib/modules
total 12
drwxr-xr-x 5 root root 4096 2009-08-06 09:23 2.6.28-11-generic
drwxr-xr-x 5 root root 4096 2009-08-06 08:06 2.6.28-14-generic
drwxr-xr-x 2 root root 4096 2009-08-06 13:12 linux-2.6.9.6-rt23
donc pour moi ce serait bon autant laisser continuer...
je vois que tu es sous mandriva...c'est pas exactement les mêmes droits sur les dossiers ?

bob031 · Answer

il y a quelque chose qui m'intrigue : comment peux-tu taper des commandes alors que ton système est en train compiler ?

la seule possibilité serait que tu es ouvert une deuxième console ...

il faut absolument, lors de la procédure de compilation, travailler toujours en root et toujours dans la même console ...

cece466 · Answer

oui j'avais ouvert une autre console....

bob031 · Answer

vraiment, je suis désolé mais je ne comprend toujours pas :

est-ce que la compilation s'est arrêtée (donc le système t'a rendu le prompt) lorsque tu as eu ce message :
H16TOFW firmware/vicam/firmware.fw
IHEX firmware/cpia2/stv0672_vp4.bin
mkdir: ne peut créer le répertoire `/lib/modules/2.6.29.6-rt23': Permission non accordée
make: *** [_modinst_] Erreur 1

oui ou non ?

cece466 · Answer

oui elle s'est arretée mais j'ai fait sudo make-dpkg clean
changé les droits sur /lib/modules:
sudo chmod -R /lib/modules
crée un dossier dans modules :sudo mkdir linux-2.6.29.6-rt23 
verifie les droits de tout les dossiers dans /lib pour voir s'ils sont identiques   :
:/lib/modules$ ls -l /lib/modules
total 12
drwxr-xr-x 5 root root 4096 2009-08-06 09:23 2.6.28-11-generic
drwxr-xr-x 5 root root 4096 2009-08-06 08:06 2.6.28-14-generic
drwxr-xr-x 2 root root 4096 2009-08-06 13:12 linux-2.6.9.6-rt23

et là ça me semble bon non donc ça ne sert a rien d'arreter la compilation que j'ai relancé il y a une heure environ...non?
tu vois que je suis....

bob031 · Answer

si ta précédente compilation avait planté en moins d'une heure, on peut supposer que cela vaille le coup de poursuivre cette toute dernière compilation.

... donc laissons compiler ....

:-)

lami20j · Answer

Re,

mais j'ai fait sudo make-dpkg clean 
Je ne comprends pas. Je ne vois pas dans mon message make-dpkg clean

Il faut arrêter de mélanger.
Si tu fais ce que je t'ai donné (la compilation est très longue) alors on peut continuer, sinon je ne peux pas faire autre chose.

Donc fait tout ce que je t'ai donné jusqu'à la commande make && make_modules_install inclus et puis tu dis quand c'est fini.

Et ne parle plus de make-dpkg ou sudo.

Il faut avoir une grande patience pour la compilation.
Après avoir lancer la commande make && make modules_install fait autre chose et surtout ne fait pas en parallèle une autre compilation.

cece466 · Answer

ben non ça passe pas ....
mkdir: ne peut créer le répertoire `/lib/modules/2.6.29.6-rt23': Permission non accordée
make: *** [_modinst_] Erreur 1

lami20j · Answer

Re,

Bon.
Je pense qu'on doit faire autrement.
Je te donne les commandes à taper une par une puisque en root tu ne devrais pas cette histoire de droits.
Tu m'afficheras ce que tu tapes avant d'appuyer sur ENTRER
T'es d'accord ou pas?

cece466 · Answer

oui desolé mais je pige pas...

lami20j · Answer

Re,

T'es d'accord qu'on le fasse ensemble pas à pas?

cece466 · Answer

oui (un peu marre là....)

cece466 · Answer

j'attend que tu me dise.....

cece466 · Answer

???????

cece466 · Answer

voila toujours mes droits dans /lib/modules:
  ls -l /lib/modules
total 12
drwxr-xr-x 5 root root 4096 2009-08-06 09:23 2.6.28-11-generic
drwxr-xr-x 5 root root 4096 2009-08-06 08:06 2.6.28-14-generic
drwxr-xr-x 2 root root 4096 2009-08-06 13:12 linux-2.6.9.6-rt23

j'attend que tu me dise....

cece466 · Answer

donc si je comprend bien root a bien les droits sur ecriture(rw) execution(x) lecture(r)
non là j'avoue c'est pas banal.....

cece466 · Answer

ben t'es ou l'ami20j ?

lami20j · Answer

Re,

Tape sudo su - pour passer en root.
Pour être sûr affchie le résultat de whoami

P.S. Je suis au boulot, donc patience

cece466 · Answer

ahhhhhhh.......... je croyais que vous faisiez la tête...
 sudo -su
sudo: please use single character options
usage: sudo -h | -K | -k | -L | -l | -V | -v
usage: sudo [-bEHPS] [-p prompt] [-u username|#uid] [VAR=value]
            {-i | -s | <command>}
usage: sudo -e [-S] [-p prompt] [-u username|#uid] file ...
deja? ça commence bien....il me l'avait deja faite ce matin...

lami20j · Answer

Re,

Je n'ai pas dit 
sudo -su
mais
sudo su -
Attention aux espace (avant et après su)

cece466 · Answer

dsl
root@cedric0-desktop:~# whoami
root
root@cedric0-desktop:~#

lami20j · Answer

Re,

Maintenant tape et affiche le résultat de
cd /usr/src && ls -l

cece466 · Answer

cd /usr/src && ls -l
total 60116
lrwxrwxrwx  1 root    src        14 2009-08-06 09:43 linux -> linux-2.6.29.6
drwxrwxr-x 22 root    root     4096 2009-08-06 14:53 linux-2.6.29.6
-rw-r--r--  1 root    src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root    root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root    root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 cedric0 src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
root@cedric0-desktop:/usr/src#

cece466 · Answer

cette ligne me semble pas normale...
-rw-r--r--  1 cedric0 src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
pas les droits en execution?

cece466 · Answer

ok

lami20j · Answer

Re,
rm -v linux
rm -v patch-2.6.29.6-rt23 
wget ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.­29.6-rt23.bz2
bunzip2 patch-2.6.­29.6-rt23.bz2
ls -lEt affiche le résultat

cece466 · Answer

wget ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.­29.6-rt23.bz2
--2009-08-06 15:46:06--  ftp://ftp.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.%C2%AD29.6-rt23.bz2
           => `patch-2.6.­29.6-rt23.bz2'
Résolution de ftp.kernel.org... 199.6.1.164, 130.239.17.4
Connexion vers ftp.kernel.org|199.6.1.164|:21... connecté.
Ouverture de session en anonymous... Session établie!
==> SYST ... complété.    ==> PWD ... complété.
==> TYPE I ... complété.  ==> CWD /pub/linux/kernel/projects/rt ... complété.
==> SIZE patch-2.6.\302\25529.6-rt23.bz2 ... complété.
==> PASV ... complété.    ==> RETR patch-2.6.\302\25529.6-rt23.bz2 ... 
Fichier « patch-2.6.\302\25529.6-rt23.bz2 » inexistant.

lami20j · Answer

Re,

Ne fait pas un copie coller de mon lien, c'est possible d'avoir des caractères indésirables.
Tu vas sur le site de kernel.org et tu cherches le bon lien.
Ensuite télécharge le.

cece466 · Answer

wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.6-rt23.bz2
--2009-08-06 15:50:17--  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.6-rt23.bz2
Résolution de www.kernel.org... 199.6.1.164, 130.239.17.4
Connexion vers www.kernel.org|199.6.1.164|:80... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Longueur: 973050 (950K) [application/x-bzip2]
Saving to: `patch-2.6.29.6-rt23.bz2'

100%[======================================>] 973 050     1,80M/s   in 0,5s    

2009-08-06 15:50:18 (1,80 MB/s) - « patch-2.6.29.6-rt23.bz2 » sauvegardé [973050/973050]

root@cedric0-desktop:/usr/src# bunzip2 patch-2.6.­29.6-rt23.bz2
bunzip2: Can't open input file patch-2.6.­29.6-rt23.bz2: No such file or directory.
root@cedric0-desktop:/usr/src# bunzip2 patch-2.6.­29.6-rt23.bz2
bunzip2: Can't open input file patch-2.6.­29.6-rt23.bz2: No such file or directory.
root@cedric0-desktop:/usr/src# bunzip2 patch-2.6.29.6-rt23.bz2
root@cedric0-desktop:/usr/src# ls -l
total 60116
drwxrwxr-x 22 root root     4096 2009-08-06 14:53 linux-2.6.29.6
-rw-r--r--  1 root src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23

lami20j · Answer

Re,

Ok.
Tape et afficherm -fR linux-2.6.29.6 
ls -l

cece466 · Answer

root@cedric0-desktop:/usr/src# rm -fR linux-2.6.29.6 
root@cedric0-desktop:/usr/src# ls -l
total 60112
-rw-r--r--  1 root src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23

cece466 · Answer

aaaaaaahhhhhhhhhhhhhhhh!!!!!!!!!!

bob031 · Answer

Re-,

que se passe-t-il ?

:-)

cece466 · Answer

re ben l'ami20j  a fini de bosser donc il m'a dit ce soir 20heures ou demain....
je trouve mes journées bien ennuyeuses...

bob031 · Answer

je trouve mes journées bien ennuyeuses...

je te comprend ... la compile c'est pas ce qu'il y a de plus drôle ....

attend ! je regarde un truc et je reposte

cece466 · Answer

root@cedric0-desktop:/usr/src#

bob031 · Answer

comme je le disais, ce qui m'étonne c'est ceci :

-rw-r--r-- 1 root src 56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root 4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x 7 root root 4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r-- 1 root src 4990971 2009-07-09 20:10 patch-2.6.29.6-rt23

je ne sais pas pourquoi mais je me serait attendu à "root root" au lieu de "root src". 
maintenant je ne sais pas si ç joue sur la compile .....

<EDIT : je viens de télécharger le patch et le l'ai copié en root dans mon /usr/src/ et j'obtiens (sans aucune modification par la suite) :

-rw-r--r--  1 root root 973050 2009-08-06 18:00 patch-2.6.29.6-rt23.bz2

EDIT>

cece466 · Answer

ok tout c'est bien passé (je te rappele que j'ai toujour un dossier crée dans /lib/modules d'une précedente installation
donc je te donne les droits de /modules...  
root@cedric0-desktop:/usr/src# ls -l /lib/modules
total 12
drwxr-xr-x 5 root root 4096 2009-08-06 09:23 2.6.28-11-generic
drwxr-xr-x 5 root root 4096 2009-08-06 08:06 2.6.28-14-generic
drwxr-xr-x 2 root root 4096 2009-08-06 13:12 linux-2.6.9.6-rt23

 puisque c'est là que ça bloquait tout a l'heure...lors de la compilation...

root@cedric0-desktop:/usr/src# ls -l 
total 60120
drwxr-sr-x  2 root src      4096 2009-08-06 18:02 linux
drwxrwxr-x 22 root root     4096 2009-07-03 01:41 linux-2.6.29.6
-rw-r--r--  1 root src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
root@cedric0-desktop:/usr/src#

cece466 · Answer

ah tu vois? même toi tu trouves des trucs bizarres....
enfin il les a decompressé donc a priori pas de pb non?

cece466 · Answer

en + il les voit comme des fichiers et non comme des dossiers vu qu'ils sont comprésses...

bob031 · Answer

ben si, il y a problème car tous les dossiers/fichiers issus de la décrompression seront "root src"

si toutes tes compilations précédentes correspondaient à ce cas, je crois qu'il faut rféfléchir sur ce point ....

de même je constate que la création du répertoire linux est aussi "root src"

j'ai l'impression que tout ce qui est créé à l'intérieur du répertoire /usr/src/, est estampillé "root src".

pour le confirmer essaie cette commande :
cd && mkdir /usr/src/linux2 && ls -l /usr/src/

cece466 · Answer

bon a ce stade on peut peut etre modifier quitte a repartir de zero a partir d'ici?

cece466 · Answer

voila
root@cedric0-desktop:/usr/src# cd && mkdir /usr/src/linux2 && ls -l /usr/src/
total 60124
drwxr-sr-x  2 root src      4096 2009-08-06 18:02 linux
drwxr-sr-x  2 root src      4096 2009-08-06 18:17 linux2
drwxrwxr-x 22 root root     4096 2009-07-03 01:41 linux-2.6.29.6
-rw-r--r--  1 root src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
root@cedric0-desktop:~#

cece466 · Answer

effectivement même en visuel j'ai le petit cadenas sur les dossiers...

bob031 · Answer

merci ! ça ne change rien !

ok ! on va supprimer le répertoire-test linux2 :
cd /usr/src/ && rm -R linux2

je pense qu'il vaut mieux avoir la confirmation avec lami20j puisqu'il l'a installé (en espérant qu'il n'a pas tout viré) afin de comparer ses fichiers aux tiens ....

si les problèmes venaient de ce point, j'en serais pas étonné ....

:-)

cece466 · Answer

root@cedric0-desktop:~# cd /usr/src/ && rm -R linux2
root@cedric0-desktop:/usr/src#

bob031 · Answer

essaie ceci :
chown root:root linux && ls -l

cece466 · Answer

si je fait chmod -R root:root /usr/src...
et reprendre du debut c'est pas bon.?

cece466 · Answer

root@cedric0-desktop:/usr/src# chown root:root linux && ls -l
total 60120
drwxr-sr-x  2 root root     4096 2009-08-06 18:02 linux
drwxrwxr-x 22 root root     4096 2009-07-03 01:41 linux-2.6.29.6
-rw-r--r--  1 root src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root src   4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
root@cedric0-desktop:/usr/src#

cece466 · Answer

le patch est toujours root:src vu qu'il s'appele pas linux....

bob031 · Answer

ok ! ensuite tu fais :
chown root:root patch-2.6.29.6-rt23 

et tu reprends la procédure de lami20j, à partir de :
bunzip2 patch-2.6.29.6-rt23.bz2
etc ...


et à la moindre erreur, tu stoppes tout !!!!

et tu nous copies-colles les erreurs, ok ?

cece466 · Answer

root@cedric0-desktop:/usr/src# chown root:root patch-2.6.29.6-rt23 
root@cedric0-desktop:/usr/src#

cece466 · Answer

ls -l 
total 60120
drwxr-sr-x  2 root root     4096 2009-08-06 18:02 linux
drwxrwxr-x 22 root root     4096 2009-07-03 01:41 linux-2.6.29.6
-rw-r--r--  1 root src  56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root root  4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
 en fait c'est là qu'il faudrait reprendre la procédure des le depart non?
il a pas change les droit sur linux-2.6.29.6.tar.bz2....

bob031 · Answer

ben vas-y , continues avec les commandes suivantes :
bunzip2 patch-2.6.29.6-rt23.bz2
ln -sfn linux-2.6.29.6 linux
cd linux
patch -p1 < ../patch-2.6.29.6-rt23

ensuite tu me dis si les 4 commadnes sont bien passées.

cece466 · Answer

root@cedric0-desktop:/usr/src# chown root:root linux-2.6.29.6.tar.bz2 
root@cedric0-desktop:/usr/src# ls -l 
total 60120
drwxr-sr-x  2 root root     4096 2009-08-06 18:02 linux
drwxrwxr-x 22 root root     4096 2009-07-03 01:41 linux-2.6.29.6
-rw-r--r--  1 root root 56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root root  4990971 2009-07-09 20:10 patch-2.6.29.6-rt23

cece466 · Answer

ben faut peu etre virer les autres avant non?

cece466 · Answer

redonne la commande pour vire les autres...
ls -l
total 60120
drwxr-sr-x  2 root root     4096 2009-08-06 18:02 linux
drwxrwxr-x 22 root root     4096 2009-07-03 01:41 linux-2.6.29.6
-rw-r--r--  1 root root 56550359 2009-08-06 09:29 linux-2.6.29.6.tar.bz2
drwxr-xr-x 22 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14
drwxr-xr-x  7 root root     4096 2009-08-06 08:04 linux-headers-2.6.28-14-generic
-rw-r--r--  1 root root  4990971 2009-07-09 20:10 patch-2.6.29.6-rt23
root@cedric0-desktop:/usr/src# 


linux et linux-2.6.29.6 qui avaient deja ete decompressés...

bob031 · Answer

tous tes fichiers sont "root root" ..que veux-tu virer ??

tu peux faire :
ls -l linux-2.6.29.6
et vérifier que tous les sous-répertoires sont "root root" (pas la peine de coller les résultats)

cece466 · Answer

ben non en fait on avait deja decompresse le patch et vire le fichier compressé correspondant...
donc je le retelecharge...? ben pour le fichier a decompresser ....

root@cedric0-desktop:/usr/src# ls -l /linux-2.6.29.6
ls: ne peut accéder /linux-2.6.29.6: Aucun fichier ou dossier de ce type
root@cedric0-desktop:/usr/src#

cece466 · Answer

oui ils sont tous en root:root

cece466 · Answer

root@cedric0-desktop:/usr/src# patch -p1 < ../patch-2.6.29.6-rt23
-su: ../patch-2.6.29.6-rt23: Aucun fichier ou dossier de ce type
root@cedric0-desktop:/usr/src# cd linux
root@cedric0-desktop:/usr/src/linux# patch -p1 < ../patch-2.6.29.6-rt23
patching file Documentation/ABI/testing/debugfs-kmemtrace
can't find file to patch at input line 81
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: linux-2.6-tip/Documentation/DMA-API.txt
|===================================================================
|--- linux-2.6-tip.orig/Documentation/DMA-API.txt
|+++ linux-2.6-tip/Documentation/DMA-API.txt
--------------------------
File to patch:

cece466 · Answer

bon je tente le coup et retelecharge le patch....

bob031 · Answer

arrête toi ! et lis tes MP , stp !!!

cece466 · Answer

oui oui c'est bon tout ça...

cece466 · Answer

ben oui là on en est a make menuconfig..
passe en visio si tu veux cece466@live.fr
j'ai l'impression que le sîte me mange des messages...

cece466 · Answer

root@cedric0-desktop:/usr/src/linux# cp -v /boot/config-$(uname -r) .config
`/boot/config-2.6.28-14-generic' -> `.config'

cece466 · Answer

ls -l
total 392
drwxrwxr-x 23 root root   4096 2009-08-06 19:36 arch
drwxrwxr-x  2 root root   4096 2009-08-06 19:36 block
-rw-rw-r--  1 root root  18693 2009-07-03 01:41 COPYING
-rw-rw-r--  1 root root  93484 2009-07-03 01:41 CREDITS
drwxrwxr-x  3 root root   4096 2009-08-06 19:36 crypto
drwxrwxr-x 83 root root  12288 2009-08-06 19:36 Documentation
drwxrwxr-x 84 root root   4096 2009-07-03 01:41 drivers
drwxrwxr-x 23 root root   4096 2009-07-03 01:41 firmware
drwxrwxr-x 65 root root   4096 2009-08-06 19:36 fs
drwxrwxr-x 26 root root   4096 2009-08-06 19:36 include
drwxrwxr-x  2 root root   4096 2009-08-06 19:36 init
drwxrwxr-x  2 root root   4096 2009-08-06 19:36 ipc
-rw-rw-r--  1 root root   2430 2009-07-03 01:41 Kbuild
drwxrwxr-x  6 root root   4096 2009-08-06 19:36 kernel
drwxrwxr-x  6 root root   4096 2009-08-06 19:36 lib
-rw-rw-r--  1 root root 110285 2009-08-06 19:36 MAINTAINERS
-rw-rw-r--  1 root root  54924 2009-08-06 19:36 Makefile
drwxrwxr-x  2 root root   4096 2009-08-06 19:36 mm
drwxrwxr-x 46 root root   4096 2009-07-03 01:41 net
-rw-rw-r--  1 root root  17080 2009-07-03 01:41 README
-rw-rw-r--  1 root root   3172 2009-07-03 01:41 REPORTING-BUGS
drwxrwxr-x  7 root root   4096 2009-07-03 01:41 samples
drwxrwxr-x 12 root root   4096 2009-08-06 19:36 scripts
drwxrwxr-x  5 root root   4096 2009-08-06 19:36 security
drwxrwxr-x 20 root root   4096 2009-07-03 01:41 sound
drwxrwxr-x  2 root root   4096 2009-08-06 19:36 usr
drwxrwxr-x  3 root root   4096 2009-07-03 01:41 virt

bob031 · Answer

suis plutôt sur MP ...

cece466 · Answer

bon make menuconfig?

bob031 · Answer

oui !

Ha oui c'est vrai qu'il y a l'option " -v " (= verbose = bavard).

donc c'est tout bon

un conseil : quand tu colles les résultats, fais le avec le prompt en dernière ligne, comme ceci :
Root@cedric0-desktop:/usr/src/linux# cp -v /boot/config-$(uname -r) .config
`/boot/config-2.6.28-14-generic' -> `.config'
Root@cedric0-desktop:/usr/src/linux#

pour être sûr qu'il ne manque rien. merci.

donc on vient de copier le fichier .config de ton ancien noyau dans le répertoire du nouveau noyau à compiler, ok ?
ainsi tu n'auras plus qu'à rajouter les options manquantes avant de lancer la compilation.

pour rajouter les options manquantes, on lanceras make menuconfig et c'est-à-ce moment que tu utliseras ton lien maolinux pour vérifier que les options qui t'intéressent ont bien été intégrées et surtout les activées avant de compiler.

ok ?
attention : tu ne taperas aucune commande indiquée sur le lien du site maolinux !!!!

donc tu vas taper la commande :
make menuconfig
il va défiler quelques lignes puis une interface graphique rudimentaire va s'afficher. En t'aidant de ton lien maolinux, tu coches les options qu'il te faut !
une fois fait, tu enregistes la configuration et tu me dis si c'est ok.

ensuite on lancera la compilation. 

ps : peux-tu redonner le lien de ton site maolinux , stp ...

lami20j · Answer

Re,

Ben, je vois que c'est parti dans toutes les directions :-(
Vu que ce message est devenu trop long, je te propose d'ouvrir un nouveau et on fera pas à pas comme je t'ai proposé.
Celui la je le ferme.
Merci.

Changer de noyeau ubuntu 9.04 et real time

164 réponses

Discussions similaires

Newsletters