Achat carte graphique compatibilité

Fermé
mike - 6 oct. 2010 à 10:31
 Utilisateur anonyme - 6 oct. 2010 à 15:54
Bonjour,

je souhaite achetez une de ces cartes graphique :

https://www.grosbill.com/4-sapphire_hd2600pro_512_11117_99_90r_-57871-informatique-_carte_graphique?utm_source=clubic&utm_medium=cpc&utm_campaign=57871-informatique-pci_express&utm_content=

ou

https://www.grosbill.com/4-sapphire_hd2400pro_512-64019-informatique-_carte_graphique?utm_source=clubic&utm_medium=cpc&utm_campaign=64019-informatique-pci_express&utm_content=

mais je ne sais pas si elle est compatible avec ma config et si j ai un port qui peut l'accueillir.

ma config :

Informations générales :
Produit : Aspire M1201
Version : Indéterminé
Numéro de série : 92QIM7ZC7B8300BE8D2701
Unique ID : 001FE205-653A2008-07250506-27000000
SKU : To Be Filled By O.E.M.
Famille : To Be Filled By O.E.M.
Mode de démarrage : Power Switch

Informations OEM :
OEM #1 : ATI RS740+SB700

Informations Châssis :
Intrusion détectée : Indéterminé
nformations générales :
Fabricant : Acer
Produit : RS740DVF
Version : Indéterminé
Numéro de série : 04VD82504180
Support MP : Non

Informations Châssis :
Fabricant : Acer
Type : Desktop
Version : 1.0
Numéro de série : 00000000
Asset : Indéterminé

OEM Support SLIC :
HPET : Oui
SLIC : Oui
SLP OA : v2.0

Informations Capteurs :
Surveillance Matériel : ITE IT8718F

Informations On-Board :
Périphérique : WMI,Win32_VideoController (Video)
Périphérique : WMI,Win32_NetworkAdapter (Ethernet)
Périphérique : WMI,Win32_SoundDevice (Sound)
Embedded Controller : Oui

Informations Slots :
Slot PCI-Express : x1 [3.3v, Shared Slot Opening] - Actuellement utilisé
Slot PCI-Express : x16 [3.3v, Shared Slot Opening] - Vide
Slot PCI : 32-bit [3.3v, Shared Slot Opening] - Vide
Slot PCI : 32-bit [3.3v, Shared Slot Opening] - Vide

Connecteurs externes :

Informations EEPROM :
Type : EEPROM Spécifique
Adresse : 0x57
nformations générales :
Fabricant : American Megatrends Inc.
Version : R03-B0
Date : 05/07/2008 (mm/dd/yyyy)
Adresse : 1024 Ko
Copyright : (C)2006 American Megatrends, Inc
Motherboard ID : 64-0100-000001-00101111-050708-ATHLON64-7B4A1C29
Bios AGESA : 3.1.7.0
SMBios Version : Indéterminé
DMI Version : 2.5

Particularités :
Flashable : Oui
Soudé à la carte : Oui

Fonctionnalités :
APM : Oui
ACPI : Oui
ESCD : Oui
PnP : Oui
PCI : Oui
ISA : Oui
AGP : Non
USB : Oui
PCMCIA : Non
Smart Battery : Non

Boot Information :
Selectable Boot : Oui
CD-ROM Boot : Oui
PC Card (PCMCIA) Boot : Non
I20 Boot : Non
LS-120 Boot : Oui
1394 Boot : Non
ATAPI ZIP Boot : Oui
Network Boot : Non
Informations générales :
NorthBridge : AMD RS740
NorthBridge : AMD K8 Bridge
SouthBridge : ATI SB700

NorthBridge Informations :
Architecture : Northbridge
Fabricant : AMD (Acer)
Revision : 00
Horloge HyperTransport : 800 MHz
Upstream : 16 bits
Downstream : 16 bits

NorthBridge Informations :
Architecture : Northbridge
Contrôleur mémoire : Intégré au processeur
Fabricant : AMD
Revision : 00
Fréquence Bus : 199.5 MHz
HT Link : 797.8 MHz
Horloge HyperTransport : 800 MHz
Upstream : 16 bits
Downstream : 16 bits
HTT max. Support : 2000 MHz
RAM max. Support : DDR2 (800 MHz)

Informations Mémoire :
Type : DDR2-SDRAM PC2-3200
Fréquence : 199.5 MHz
DRAM/FSB Ratio : CPU/5
Canaux supportés : Dual
ECC Diagnostic : Oui - Désactivé
CAS Latency (tCL) : 5 clocks
RAS to CAS (tRCD) : 5 clocks
RAS Precharge (tRP) : 5 clocks
Cycle Time (tRAS) : 15 clocks
Bank Cycle Time (tRC) : 21 clocks
Command Rate : 2 T

Caractéristiques Physique :
Multi-Processor : Non
128 bits RAM : Oui
ECC : Oui - Désactivé
ChipKill ECC : Oui - Désactivé
HTC : Oui
UnGanging Support : Non
Multi VID Plane : Non
DRAM Scrub Rate : Désactivé
L3 Cache Scrub Rate : Désactivé
L2 Cache Scrub Rate : Désactivé
L1 Cache Scrub Rate : Désactivé

Informations APIC :
Version : 2.01
Interruptions Maximum : 24
Descripteur IRQ activé : Oui

Possibilités du périphérique (PCI) :
I/O Access : Non
Memory Access : Oui
Bus Master Capable : Oui
Special Cycle Recognition : Non
Memory Write & Invalidate : Non
VGA Palette Snoop : Non
Parity Error Response : Non
Cycle Wait : Non
System Error Line : Non
Fast Back-to-Back : Non
Detects Parity Errors : Non
User Defined Format : Non
PCI 66Mhz Bus Support : Oui
New Capability List : Non
PCI Support : Hyper-Transport
Informations générales :
DIMM0 (BANK0 ) : 1024 Mo - DIMM
DIMM1 (BANK1 ) : 1024 Mo - DIMM
DIMM2 (BANK2 ) : 512 Mo - DIMM
DIMM3 (BANK3 ) : 512 Mo - DIMM

Informations SPD EEPROM (DIMM0) :
Fabricant : Hyundai Electronics
Part Number : HYMP112U64CP8-Y5
Numéro de série : Indéterminé
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133,35 x 3)
Taille : 1024 Mo (1 ranks, 8 banks)
Module Buffered : Non
Module Registered : Non
Module SLi Ready (EPP) : Non
Largeur : 64 bits
Correction d'erreur (ECC) : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8, Self Refreshµs
Voltage : SSTL 1.8v
Prefetch Buffer : 4 bits
Fabrication : semaine 24 de 2008
Fréquences supportées : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS to CAS (tRCD) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS Precharge (tRP) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
Cycle Time (tRAS) : 9 clocks @ 200 MHz, 12 clocks @ 266 MHz, 15 clocks @ 333 MHz
Min TRC : 12 clocks @ 200 MHz, 16 clocks @ 266 MHz, 20 clocks @ 333 MHz

Informations SPD EEPROM (DIMM1) :
Fabricant : Hyundai Electronics
Part Number : HYMP112U64CP8-Y5
Numéro de série : Indéterminé
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133,35 x 3)
Taille : 1024 Mo (1 ranks, 8 banks)
Module Buffered : Non
Module Registered : Non
Module SLi Ready (EPP) : Non
Largeur : 64 bits
Correction d'erreur (ECC) : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8, Self Refreshµs
Voltage : SSTL 1.8v
Prefetch Buffer : 4 bits
Fabrication : semaine 24 de 2008
Fréquences supportées : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS to CAS (tRCD) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS Precharge (tRP) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
Cycle Time (tRAS) : 9 clocks @ 200 MHz, 12 clocks @ 266 MHz, 15 clocks @ 333 MHz
Min TRC : 12 clocks @ 200 MHz, 16 clocks @ 266 MHz, 20 clocks @ 333 MHz

Informations SPD EEPROM (DIMM2) :
Fabricant : Hyundai Electronics
Part Number : HYMP564U64CP8-Y5
Numéro de série : Indéterminé
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133,35 x 3)
Taille : 512 Mo (1 ranks, 4 banks)
Module Buffered : Non
Module Registered : Non
Module SLi Ready (EPP) : Non
Largeur : 64 bits
Correction d'erreur (ECC) : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8, Self Refreshµs
Voltage : SSTL 1.8v
Prefetch Buffer : 4 bits
Fabrication : semaine 29 de 2008
Fréquences supportées : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS to CAS (tRCD) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS Precharge (tRP) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
Cycle Time (tRAS) : 9 clocks @ 200 MHz, 12 clocks @ 266 MHz, 15 clocks @ 333 MHz
Min TRC : 12 clocks @ 200 MHz, 16 clocks @ 266 MHz, 20 clocks @ 333 MHz

Informations SPD EEPROM (DIMM3) :
Fabricant : Hyundai Electronics
Part Number : HYMP564U64CP8-Y5
Numéro de série : Indéterminé
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133,35 x 3)
Taille : 512 Mo (1 ranks, 4 banks)
Module Buffered : Non
Module Registered : Non
Module SLi Ready (EPP) : Non
Largeur : 64 bits
Correction d'erreur (ECC) : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8, Self Refreshµs
Voltage : SSTL 1.8v
Prefetch Buffer : 4 bits
Fabrication : semaine 29 de 2008
Fréquences supportées : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS to CAS (tRCD) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
RAS Precharge (tRP) : 3 clocks @ 200 MHz, 4 clocks @ 266 MHz, 5 clocks @ 333 MHz
Cycle Time (tRAS) : 9 clocks @ 200 MHz, 12 clocks @ 266 MHz, 15 clocks @ 333 MHz
Min TRC : 12 clocks @ 200 MHz, 16 clocks @ 266 MHz, 20 clock
Bus informations :
Type : ISA - LPC
Périphérique : SB700 LPC Host Controller
Revision : 00
Nombre de connecteurs ISA : 0

Possibilités du périphérique (PCI) :
I/O Access : Oui
Memory Access : Oui
Bus Master Capable : Oui
Special Cycle Recognition : Oui
Memory Write & Invalidate : Non
VGA Palette Snoop : Non
Parity Error Response : Non
Cycle Wait : Non
System Error Line : Non
Fast Back-to-Back : Non
Detects Parity Errors : Non
User Defined Format : Non
PCI 66Mhz Bus Support : Oui
New Capability List : Non
PCI Support : AGP
Informations générales :
Nombre de bus PCI : 4
Nombre de connecteurs PCI : 2

Type de périphérique :
Périphérique 6, Bus 0 : PCI-Express
Périphérique 7, Bus 0 : PCI-Express

Caractéristiques générales :
Support PCI Mechanism 1 : Oui

Informations Bus #0 :
Périphérique : RS690 Host Bridge
Périphérique : RS690 PCI to PCI Bridge (Internal gfx)
Périphérique : RS690 PCI to PCI Bridge (PCIe Port 1)
Périphérique : RS690 PCI to PCI Bridge (PCIe Port 2)
Périphérique : SB700 SATA Controller [IDE mode]
Périphérique : SB700 USB OHCI Controller #0
Périphérique : SB700 USB OHCI Controller #1
Périphérique : SB700 USB EHCI Controller
Périphérique : SB700 USB OHCI Controller #0
Périphérique : SB700 USB OHCI Controller #1
Périphérique : SB700 USB EHCI Controller
Périphérique : SB600 SMBUS Controller
Périphérique : SB700 EIDE Controller
Périphérique : SB600 High Definition Audio Controller
Périphérique : SB700 LPC Host Controller
Périphérique : SB600 PCI to PCI Bridge
Périphérique : SB700 USB OHCI Controller #2
Périphérique : Athlon64/Opteron/Sempron (K8 Family) HyperTransport Technology Configuration
Périphérique : Athlon64/Opteron/Sempron (K8 Family) Address Map
Périphérique : Athlon64/Opteron/Sempron (K8 Family) DRAM Controller
Périphérique : Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control

Informations Bus #1 :
Périphérique : Radeon 2100

Informations Bus #2 :
Périphérique : Yukon 88E8071 PCIe Gigabit Ethernet Controller

Informations Bus #3 :
Périphérique : IEEE 1394 Host Controller
nformations PCI-Express :
Nombre de connecteurs : 2

Bus PCI-Express :
Périphérique : RS690 PCI to PCI Bridge (PCIe Port 1)
Version : 1.0
Port : 2
Physical Slot : #0
Slot Populated : Oui
Link Width : x1 (max. x1)
Link Speed : 2.5 Go/s

Bus PCI-Express :
Périphérique : RS690 PCI to PCI Bridge (PCIe Port 2)
Version : 1.0
Port : 3
Physical Slot : #0
Slot Populated : Oui
Link Width : x1 (max. x1)
Link Speed : 2.5 Go/s


A voir également:

4 réponses

Giovanni59410 Messages postés 526 Date d'inscription samedi 16 août 2008 Statut Membre Dernière intervention 5 août 2011 20
6 oct. 2010 à 10:44
Bonjour,

Oui normalement tous est compatible
0
merci pour la reponse
0
par contre mon alimentation sera t elle assez puissante???
0
?? c est une 205w liteon
0
euh une 250 w liteon... sinon ya quelqu un qui peut me repondre svp??
0
????!!! svp
0
Utilisateur anonyme
6 oct. 2010 à 15:44
salut mike


aparrament on ta laissé sur ta faim ,bon alors pour la deuxième cg de bibill ,la hd2400pro ,j ai trouvé un forum ou un mec en a une avec un Q6600 donc un quad core il a aussi une 250w en alim et sa config a l air plus grosse ,alors je me dit que sa doigt ètre bon pour ta config.

https://forum.hardware.fr/hfr/Hardware/conseilsachats/carte-graphique-m5610-sujet_814616_1.htm



j èspère que sa va t aidé pour la première cg ,la hd2600 ,la je ne sais pas ,mais sans dire de bétise ca doigt etre bon aussi .

francky
0
Utilisateur anonyme
6 oct. 2010 à 15:53
sinon si tu a vraiment un doute prend toi cette alimentation ,il doive aussi l avoir a gros bill

https://www.materiel.net/
0
Utilisateur anonyme
6 oct. 2010 à 15:54
avec celle la tu peut choisir meme mieux en cg sans exagèration bien sur.
0