Probleme d affichage des pages
Résolu/Fermé
ludo7684
Messages postés
384
Date d'inscription
dimanche 15 février 2009
Statut
Membre
Dernière intervention
18 mai 2016
-
15 janv. 2010 à 23:08
miramaze Messages postés 1429 Date d'inscription mercredi 29 juillet 2009 Statut Contributeur Dernière intervention 1 mai 2022 - 17 janv. 2010 à 01:29
miramaze Messages postés 1429 Date d'inscription mercredi 29 juillet 2009 Statut Contributeur Dernière intervention 1 mai 2022 - 17 janv. 2010 à 01:29
A voir également:
- Probleme d affichage des pages
- Supprimer des pages sur word - Guide
- Séparer pages pdf - Guide
- Le document à télécharger comporte 19 pages. en numérotant automatiquement chaque page de ce document, on constate que sa numérotation ne commence pas à 1. quel nom d’animal apparaît sur la page avec le numéro 30 ? - Forum Bureautique
- Affichage double ecran - Guide
- Windows 11 affichage classique - Guide
8 réponses
miramaze
Messages postés
1429
Date d'inscription
mercredi 29 juillet 2009
Statut
Contributeur
Dernière intervention
1 mai 2022
92
16 janv. 2010 à 13:09
16 janv. 2010 à 13:09
Salut,
tu pourrais préciser quelle est ta distribution et un peu mieux ce qui se passe exactement ? Est ce que ça se produit uniquement avec firefox ou bien avec d'autres programmes ? Qu'est ce que tu as fais avant pour que se produise ce problème ?
tu pourrais préciser quelle est ta distribution et un peu mieux ce qui se passe exactement ? Est ce que ça se produit uniquement avec firefox ou bien avec d'autres programmes ? Qu'est ce que tu as fais avant pour que se produise ce problème ?
ludo7684
Messages postés
384
Date d'inscription
dimanche 15 février 2009
Statut
Membre
Dernière intervention
18 mai 2016
15
16 janv. 2010 à 15:37
16 janv. 2010 à 15:37
je suis sous ubuntu 9.10 et le probleme apparait a chaque fois que je veux ouvrir n importe quelle programme ou applications ce qui se passe c est que la fenetre du programme que je souhaite ouvrir n apparait pas en entier et
toute de suite par exemple j ecris mais je suis obligé d actualisé pour voir se que j ecris desolé si tu comprend pas trop mais je sais pas comment expliqué en tout cas merci de m aider
toute de suite par exemple j ecris mais je suis obligé d actualisé pour voir se que j ecris desolé si tu comprend pas trop mais je sais pas comment expliqué en tout cas merci de m aider
miramaze
Messages postés
1429
Date d'inscription
mercredi 29 juillet 2009
Statut
Contributeur
Dernière intervention
1 mai 2022
92
16 janv. 2010 à 15:47
16 janv. 2010 à 15:47
Ok et après quoi est apparu le problème ? Mise à jour ? Installation d'un programme ? Du jour au lendemain sans explications ? Exécute la commande dmesg dans un terminal et colle le résultat ici. Comment tu te considères en informatique (bon, moyen, pas top) ? Je pose ça juste pour avoir une idée de ce qui t'aurais paru évident de faire.
ludo7684
Messages postés
384
Date d'inscription
dimanche 15 février 2009
Statut
Membre
Dernière intervention
18 mai 2016
15
16 janv. 2010 à 15:58
16 janv. 2010 à 15:58
le probleme est apparue directement apres avoir installé ubuntu sur mon pc je suis vraiment tres moyen en informatique [ 0.028035] Freeing SMP alternatives: 19k freed
[ 0.028057] ACPI: Core revision 20090521
[ 0.045636] ACPI: setting ELCR to 0200 (from 0800)
[ 0.048169] weird, boot CPU (#0) not listed by the BIOS.
[ 0.048175] SMP motherboard not detected.
[ 0.048181] Local APIC not detected. Using dummy APIC emulation.
[ 0.048185] SMP disabled
[ 0.048510] Brought up 1 CPUs
[ 0.048520] Total of 1 processors activated (2126.17 BogoMIPS).
[ 0.048553] CPU0 attaching NULL sched-domain.
[ 0.049195] Booting paravirtualized kernel on bare hardware
[ 0.052113] regulator: core version 0.5
[ 0.052146] Time: 14:19:51 Date: 01/16/10
[ 0.052284] NET: Registered protocol family 16
[ 0.052608] EISA bus registered
[ 0.052646] ACPI: bus type pci registered
[ 0.054099] PCI: PCI BIOS revision 2.10 entry at 0xf04b7, last bus=4
[ 0.054105] PCI: Using configuration type 1 for base access
[ 0.056506] bio: create slab <bio-0> at 0
[ 0.058068] ACPI: EC: Look up EC in DSDT
[ 0.086585] ACPI: Interpreter enabled
[ 0.086597] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.086644] ACPI: Using PIC for interrupt routing
[ 0.105284] ACPI: Power Resource [C13A] (on)
[ 0.105454] ACPI: Power Resource [C14E] (on)
[ 0.105622] ACPI: Power Resource [C156] (on)
[ 0.105704] ACPI: Power Resource [C15F] (on)
[ 0.105859] ACPI: Power Resource [C1DE] (off)
[ 0.106007] ACPI: Power Resource [C1DF] (off)
[ 0.106154] ACPI: Power Resource [C1E0] (off)
[ 0.107878] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.116869] ACPI: PCI Root Bridge [C03A] (0000:00)
[ 0.116960] pci 0000:00:00.0: reg 10 32bit mmio: [0x60000000-0x6fffffff]
[ 0.117091] pci 0000:00:1d.0: reg 20 io port: [0x4000-0x401f]
[ 0.117150] pci 0000:00:1d.1: reg 20 io port: [0x4020-0x403f]
[ 0.117209] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[ 0.117324] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.117333] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[ 0.117366] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.117377] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.117388] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.117398] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.117408] pci 0000:00:1f.1: reg 20 io port: [0x4060-0x406f]
[ 0.117419] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.117480] pci 0000:01:00.0: reg 10 32bit mmio: [0x48000000-0x4fffffff]
[ 0.117490] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.117500] pci 0000:01:00.0: reg 18 32bit mmio: [0x40200000-0x4020ffff]
[ 0.117518] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.117540] pci 0000:01:00.0: supports D1 D2
[ 0.117577] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.117585] pci 0000:00:01.0: bridge 32bit mmio: [0x40200000-0x402fffff]
[ 0.117593] pci 0000:00:01.0: bridge 32bit mmio pref: [0x48000000-0x4fffffff]
[ 0.117639] pci 0000:02:03.0: reg 10 32bit mmio: [0x40000000-0x40000fff]
[ 0.117661] pci 0000:02:03.0: supports D1 D2
[ 0.117667] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117675] pci 0000:02:03.0: PME# disabled
[ 0.117714] pci 0000:02:03.1: reg 10 32bit mmio: [0x40080000-0x40080fff]
[ 0.117736] pci 0000:02:03.1: supports D1 D2
[ 0.117742] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117749] pci 0000:02:03.1: PME# disabled
[ 0.117796] pci 0000:02:08.0: reg 10 32bit mmio: [0x40100000-0x40100fff]
[ 0.117807] pci 0000:02:08.0: reg 14 io port: [0x2400-0x243f]
[ 0.117846] pci 0000:02:08.0: supports D1 D2
[ 0.117852] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117859] pci 0000:02:08.0: PME# disabled
[ 0.117897] pci 0000:02:09.0: reg 10 io port: [0x2000-0x20ff]
[ 0.117945] pci 0000:02:09.0: supports D1 D2
[ 0.117950] pci 0000:02:09.0: PME# supported from D1 D2 D3hot
[ 0.117958] pci 0000:02:09.0: PME# disabled
[ 0.117991] pci 0000:00:1e.0: transparent bridge
[ 0.117998] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.118007] pci 0000:00:1e.0: bridge 32bit mmio: [0x40000000-0x401fffff]
[ 0.118055] pci_bus 0000:00: on NUMA node 0
[ 0.118066] ACPI: PCI Interrupt Routing Table [\_SB_.C03A._PRT]
[ 0.118163] ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C03B._PRT]
[ 0.118219] ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C04E._PRT]
[ 0.135475] ACPI: PCI Interrupt Link [C0A6] (IRQs 5 10 *11)
[ 0.135849] ACPI: PCI Interrupt Link [C0A7] (IRQs 5 10 *11)
[ 0.136236] ACPI: PCI Interrupt Link [C0A8] (IRQs 5 10 *11)
[ 0.136608] ACPI: PCI Interrupt Link [C0A9] (IRQs 5 10 *11)
[ 0.136981] ACPI: PCI Interrupt Link [C0AA] (IRQs 5 10 *11)
[ 0.137333] ACPI: PCI Interrupt Link [C0AB] (IRQs 5 10 11) *0, disabled.
[ 0.137708] ACPI: PCI Interrupt Link [C0AC] (IRQs 5 10 *11)
[ 0.138060] ACPI: PCI Interrupt Link [C0AD] (IRQs 5 10 11) *0, disabled.
[ 0.138595] SCSI subsystem initialized
[ 0.138793] libata version 3.00 loaded.
[ 0.138999] usbcore: registered new interface driver usbfs
[ 0.139041] usbcore: registered new interface driver hub
[ 0.139105] usbcore: registered new device driver usb
[ 0.139413] ACPI: WMI: Mapper loaded
[ 0.139418] PCI: Using ACPI for IRQ routing
[ 0.139704] Bluetooth: Core ver 2.15
[ 0.139777] NET: Registered protocol family 31
[ 0.139782] Bluetooth: HCI device and connection manager initialized
[ 0.139790] Bluetooth: HCI socket layer initialized
[ 0.139795] NetLabel: Initializing
[ 0.139799] NetLabel: domain hash size = 128
[ 0.139803] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.139833] NetLabel: unlabeled traffic allowed by default
[ 0.145093] pnp: PnP ACPI init
[ 0.145167] ACPI: bus type pnp registered
[ 0.170579] pnp: PnP ACPI: found 14 devices
[ 0.170587] ACPI: ACPI bus type pnp unregistered
[ 0.170596] PnPBIOS: Disabled by ACPI PNP
[ 0.170622] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.170631] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.170639] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.170660] system 00:0b: ioport range 0x140-0x14f has been reserved
[ 0.170668] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.170676] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.170690] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 0.170698] system 00:0c: ioport range 0x1000-0x1087 could not be reserved
[ 0.170706] system 00:0c: ioport range 0x1100-0x113f has been reserved
[ 0.170713] system 00:0c: ioport range 0x1200-0x121f has been reserved
[ 0.170721] system 00:0c: iomem range 0xffc00000-0xffc003ff has been reserved
[ 0.170734] system 00:0d: iomem range 0xce000-0xcffff has been reserved
[ 0.205653] AppArmor: AppArmor Filesystem Enabled
[ 0.205709] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.205717] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.205725] pci 0000:00:01.0: MEM window: 0x40200000-0x402fffff
[ 0.205733] pci 0000:00:01.0: PREFETCH window: 0x48000000-0x4fffffff
[ 0.205751] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.205757] pci 0000:02:03.0: IO window: 0x002800-0x0028ff
[ 0.205766] pci 0000:02:03.0: IO window: 0x002c00-0x002cff
[ 0.205774] pci 0000:02:03.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.205783] pci 0000:02:03.0: MEM window: 0x2c000000-0x2fffffff
[ 0.205791] pci 0000:02:03.1: CardBus bridge, secondary bus 0000:04
[ 0.205797] pci 0000:02:03.1: IO window: 0x001400-0x0014ff
[ 0.205805] pci 0000:02:03.1: IO window: 0x001800-0x0018ff
[ 0.205813] pci 0000:02:03.1: PREFETCH window: 0x24000000-0x27ffffff
[ 0.205822] pci 0000:02:03.1: MEM window: 0x30000000-0x33ffffff
[ 0.205830] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.205837] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.205846] pci 0000:00:1e.0: MEM window: 0x40000000-0x401fffff
[ 0.205855] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x27ffffff
[ 0.205878] pci 0000:00:1e.0: setting latency timer to 64
[ 0.206444] ACPI: PCI Interrupt Link [C0AC] enabled at IRQ 11
[ 0.206452] PCI: setting IRQ 11 as level-triggered
[ 0.206461] pci 0000:02:03.0: PCI INT A -> Link[C0AC] -> GSI 11 (level, low) -> IRQ 11
[ 0.206480] pci 0000:02:03.1: PCI INT A -> Link[C0AC] -> GSI 11 (level, low) -> IRQ 11
[ 0.206494] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.206501] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.206508] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.206514] pci_bus 0000:01: resource 1 mem: [0x40200000-0x402fffff]
[ 0.206521] pci_bus 0000:01: resource 2 pref mem [0x48000000-0x4fffffff]
[ 0.206528] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.206535] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.206541] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x27ffffff]
[ 0.206548] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.206554] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.206561] pci_bus 0000:03: resource 0 io: [0x2800-0x28ff]
[ 0.206567] pci_bus 0000:03: resource 1 io: [0x2c00-0x2cff]
[ 0.206574] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.206581] pci_bus 0000:03: resource 3 mem: [0x2c000000-0x2fffffff]
[ 0.206588] pci_bus 0000:04: resource 0 io: [0x1400-0x14ff]
[ 0.206594] pci_bus 0000:04: resource 1 io: [0x1800-0x18ff]
[ 0.206601] pci_bus 0000:04: resource 2 pref mem [0x24000000-0x27ffffff]
[ 0.206607] pci_bus 0000:04: resource 3 mem: [0x30000000-0x33ffffff]
[ 0.206706] NET: Registered protocol family 2
[ 0.206952] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.207649] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.207963] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.208349] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.208357] TCP reno registered
[ 0.208619] NET: Registered protocol family 1
[ 0.208789] Trying to unpack rootfs image as initramfs...
[ 0.646292] Freeing initrd memory: 7470k freed
[ 0.667000] speedstep-lib: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of500000 nSec.
[ 0.667025] cpufreq-nforce2: No nForce2 chipset.
[ 0.667089] Scanning for low memory corruption every 60 seconds
[ 0.667438] audit: initializing netlink socket (disabled)
[ 0.667484] type=2000 audit(1263651591.664:1): initialized
[ 0.685732] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.689700] VFS: Disk quotas dquot_6.5.2
[ 0.689846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.691311] fuse init (API version 7.12)
[ 0.691547] msgmni has been set to 993
[ 0.692040] alg: No test for stdrng (krng)
[ 0.692072] io scheduler noop registered
[ 0.692078] io scheduler anticipatory registered
[ 0.692083] io scheduler deadline registered
[ 0.692202] io scheduler cfq registered (default)
[ 0.692289] pci 0000:01:00.0: Boot video device
[ 0.692326] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.692512] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.692566] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.693098] ACPI: AC Adapter [C18D] (on-line)
[ 0.693253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.693263] ACPI: Power Button [PWRF]
[ 0.693387] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.693400] ACPI: Sleep Button [C18E]
[ 0.693499] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.693632] ACPI: Lid Switch [C18F]
[ 0.694000] fan PNP0C0B:00: registered as cooling_device0
[ 0.694013] ACPI: Fan [C1E1] (off)
[ 0.694310] fan PNP0C0B:01: registered as cooling_device1
[ 0.694324] ACPI: Fan [C1E2] (off)
[ 0.694621] fan PNP0C0B:02: registered as cooling_device2
[ 0.694634] ACPI: Fan [C1E3] (off)
[ 0.695261] Marking TSC unstable due to TSC halts in idle
[ 0.695297] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.695339] processor LNXCPU:00: registered as cooling_device3
[ 0.695706] Switched to high resolution mode on CPU 0
[ 0.712797] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.712814] ACPI: Thermal Zone [TZ1] (25 C)
[ 0.712929] isapnp: Scanning for PnP cards...
[ 1.082859] isapnp: No Plug & Play device found
[ 1.086399] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.086537] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.086984] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.089660] brd: module loaded
[ 1.090709] loop: module loaded
[ 1.090899] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.091144] ata_piix 0000:00:1f.1: version 2.13
[ 1.091168] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.091800] ACPI: PCI Interrupt Link [C0A8] enabled at IRQ 11
[ 1.091811] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0A8] -> GSI 11 (level, low) -> IRQ 11
[ 1.091897] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.096282] scsi0 : ata_piix
[ 1.096533] scsi1 : ata_piix
[ 1.097987] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4060 irq 14
[ 1.097995] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4068 irq 15
[ 1.100795] Fixed MDIO Bus: probed
[ 1.100883] PPP generic driver version 2.4.2
[ 1.101144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.101189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.101224] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.101888] ACPI: PCI Interrupt Link [C0A6] enabled at IRQ 11
[ 1.101899] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0A6] -> GSI 11 (level, low) -> IRQ 11
[ 1.101916] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.101923] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.102043] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.102085] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004000
[ 1.102297] usb usb1: configuration #1 chosen from 1 choice
[ 1.102393] hub 1-0:1.0: USB hub found
[ 1.102413] hub 1-0:1.0: 2 ports detected
[ 1.103038] ACPI: PCI Interrupt Link [C0A9] enabled at IRQ 11
[ 1.103047] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0A9] -> GSI 11 (level, low) -> IRQ 11
[ 1.103059] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.103066] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.103146] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.103177] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004020
[ 1.103356] usb usb2: configuration #1 chosen from 1 choice
[ 1.103417] hub 2-0:1.0: USB hub found
[ 1.103433] hub 2-0:1.0: 2 ports detected
[ 1.103521] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0A8] -> GSI 11 (level, low) -> IRQ 11
[ 1.103533] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.103540] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.103613] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.103642] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
[ 1.103808] usb usb3: configuration #1 chosen from 1 choice
[ 1.103868] hub 3-0:1.0: USB hub found
[ 1.103884] hub 3-0:1.0: 2 ports detected
[ 1.110571] PNP: PS/2 Controller [PNP0303:C15C,PNP0f0e:C15D] at 0x60,0x64 irq 1,12
[ 1.112253] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1.112973] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.112988] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.112996] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.113003] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.113011] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.113147] mice: PS/2 mouse device common for all mice
[ 1.113385] rtc_cmos 00:08: RTC can wake from S4
[ 1.113467] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.113498] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.113743] device-mapper: uevent: version 1.0.3
[ 1.114435] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.114564] device-mapper: multipath: version 1.1.0 loaded
[ 1.114571] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.114901] EISA: Probing bus 0 at eisa.0
[ 1.114913] Cannot allocate resource for EISA slot 1
[ 1.114918] Cannot allocate resource for EISA slot 2
[ 1.114924] Cannot allocate resource for EISA slot 3
[ 1.114929] Cannot allocate resource for EISA slot 4
[ 1.114947] EISA: Detected 0 cards.
[ 1.115141] cpuidle: using governor ladder
[ 1.115271] cpuidle: using governor menu
[ 1.116598] TCP cubic registered
[ 1.117009] NET: Registered protocol family 10
[ 1.121920] lo: Disabled Privacy Extensions
[ 1.122718] NET: Registered protocol family 17
[ 1.122765] Bluetooth: L2CAP ver 2.13
[ 1.122770] Bluetooth: L2CAP socket layer initialized
[ 1.122777] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.122782] Bluetooth: SCO socket layer initialized
[ 1.122876] Bluetooth: RFCOMM TTY layer initialized
[ 1.122884] Bluetooth: RFCOMM socket layer initialized
[ 1.122889] Bluetooth: RFCOMM ver 1.11
[ 1.123673] Using IPI No-Shortcut mode
[ 1.123838] PM: Resume from disk failed.
[ 1.123875] registered taskstats version 1
[ 1.124139] Magic number: 10:924:333
[ 1.124184] tty tty54: hash matches
[ 1.124312] rtc_cmos 00:08: setting system clock to 2010-01-16 14:19:52 UTC (1263651592)
[ 1.124320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.124325] EDD information not available.
[ 1.136729] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.142389] ACPI: Battery Slot [C18A] (battery present)
[ 1.142590] ACPI: Battery Slot [C18B] (battery absent)
[ 1.204032] Clocksource tsc unstable (delta = -66184036 ns)
[ 1.260334] ata1.00: ATA-5: FUJITSU MHN2200AT, 7A56, max UDMA/100
[ 1.260342] ata1.00: 39070080 sectors, multi 16: LBA
[ 1.268245] ata2.01: both IDENTIFYs aborted, assuming NODEV
[ 1.276492] ata1.00: configured for UDMA/100
[ 1.276774] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHN2200A 7A56 PQ: 0 ANSI: 5
[ 1.277035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.277127] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 1.277261] sd 0:0:0:0: [sda] Write Protect is off
[ 1.277268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.277337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.277682] sda:
[ 1.277861] ata2.00: ATAPI: Compaq DVD-ROM GDR-8081N, 0010, max MWDMA2
[ 1.292255] ata2.00: configured for MWDMA2
[ 1.295529] sda1 sda2 <
[ 1.299861] scsi 1:0:0:0: CD-ROM Compaq DVD-ROM GDR8081N 0010 PQ: 0 ANSI: 5
[ 1.313485] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[ 1.313492] Uniform CD-ROM driver Revision: 3.20
[ 1.313688] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.313786] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.327228] sda5 >
[ 1.327805] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.327842] Freeing unused kernel memory: 540k freed
[ 1.328862] Write protecting the kernel text: 4568k
[ 1.328956] Write protecting the kernel read-only data: 1836k
[ 1.758398] Linux agpgart interface v0.103
[ 1.838388] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 2.020741] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x60000000
[ 2.056883] [drm] Initialized drm 1.1.0 20060810
[ 2.118251] [drm] radeon default to kernel modesetting DISABLED.
[ 2.119072] ACPI: PCI Interrupt Link [C0A7] enabled at IRQ 11
[ 2.119083] pci 0000:01:00.0: PCI INT A -> Link[C0A7] -> GSI 11 (level, low) -> IRQ 11
[ 2.119849] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 2.127726] Floppy drive(s): fd0 is 1.44M
[ 2.140375] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.140384] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.141140] ACPI: PCI Interrupt Link [C0AA] enabled at IRQ 11
[ 2.141151] e100 0000:02:08.0: PCI INT A -> Link[C0AA] -> GSI 11 (level, low) -> IRQ 11
[ 2.229403] e100 0000:02:08.0: PME# disabled
[ 2.232406] e100: eth0: e100_probe: addr 0x40100000, irq 11, MAC addr 00:02:a5:b8:bf:58
[ 2.234723] FDC 0 is a post-1991 82077
[ 3.963338] PM: Starting manual resume from disk
[ 3.963348] PM: Resume from partition 8:5
[ 3.963353] PM: Checking hibernation image.
[ 3.963697] PM: Resume from disk failed.
[ 3.996912] EXT4-fs (sda1): barriers enabled
[ 4.022826] kjournald2 starting: pid 323, dev sda1:8, commit interval 5 seconds
[ 4.022864] EXT4-fs (sda1): delayed allocation enabled
[ 4.022871] EXT4-fs: file extents enabled
[ 4.027318] EXT4-fs: mballoc enabled
[ 4.027356] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.323952] type=1505 audit(1263651596.698:2): operation="profile_load" pid=346 name=/usr/share/gdm/guest-session/Xsession
[ 5.329085] type=1505 audit(1263651596.703:3): operation="profile_load" pid=347 name=/sbin/dhclient3
[ 5.330126] type=1505 audit(1263651596.703:4): operation="profile_load" pid=347 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.330704] type=1505 audit(1263651596.703:5): operation="profile_load" pid=347 name=/usr/lib/connman/scripts/dhclient-script
[ 5.429034] type=1505 audit(1263651596.803:6): operation="profile_load" pid=348 name=/usr/bin/evince
[ 5.447667] type=1505 audit(1263651596.819:7): operation="profile_load" pid=348 name=/usr/bin/evince-previewer
[ 5.458677] type=1505 audit(1263651596.831:8): operation="profile_load" pid=348 name=/usr/bin/evince-thumbnailer
[ 5.492539] type=1505 audit(1263651596.867:9): operation="profile_load" pid=350 name=/usr/lib/cups/backend/cups-pdf
[ 5.493832] type=1505 audit(1263651596.867:10): operation="profile_load" pid=350 name=/usr/sbin/cupsd
[ 22.617079] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k
[ 22.631905] udev: starting version 147
[ 22.801565] lp: driver loaded but no devices found
[ 22.974170] EXT4-fs (sda1): internal journal on sda1:8
[ 22.976921] parport_pc 00:04: reported by Plug and Play ACPI
[ 22.976962] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 23.074932] lp0: using parport0 (interrupt-driven).
[ 23.075505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.081112] intel_rng: FWH not detected
[ 23.488574] yenta_cardbus 0000:02:03.0: CardBus bridge found [0e11:004e]
[ 23.488598] yenta_cardbus 0000:02:03.0: Enabling burst memory read transactions
[ 23.488606] yenta_cardbus 0000:02:03.0: Using CSCINT to route CSC interrupts to PCI
[ 23.488612] yenta_cardbus 0000:02:03.0: Routing CardBus interrupts to PCI
[ 23.488621] yenta_cardbus 0000:02:03.0: TI: mfunc 0x01001002, devctl 0x64
[ 23.501034] psmouse.c: Failed to reset mouse on isa0060/serio4
[ 23.872127] ppdev: user-space parallel port driver
[ 23.897195] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0438, PCI irq 11
[ 23.897205] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 23.897221] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 23.897231] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 23.897662] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x401fffff
[ 23.897670] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 23.897999] yenta_cardbus 0000:02:03.1: CardBus bridge found [0e11:004e]
[ 23.898019] yenta_cardbus 0000:02:03.1: Using CSCINT to route CSC interrupts to PCI
[ 23.898026] yenta_cardbus 0000:02:03.1: Routing CardBus interrupts to PCI
[ 23.898035] yenta_cardbus 0000:02:03.1: TI: mfunc 0x01001002, devctl 0x64
[ 24.053541] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.140562] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0438, PCI irq 11
[ 24.140572] yenta_cardbus 0000:02:03.1: Socket status: 30000006
[ 24.140581] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 24.140600] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 24.140609] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x2fff: clean.
[ 24.141041] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x401fffff
[ 24.141049] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 24.273639] Maestro3 0000:02:09.0: PCI INT A -> Link[C0A6] -> GSI 11 (level, low) -> IRQ 11
[ 24.273656] Maestro3 0000:02:09.0: firmware: requesting ess/maestro3_assp_kernel.fw
[ 24.329510] Maestro3 0000:02:09.0: firmware: requesting ess/maestro3_assp_minisrc.fw
[ 24.348459] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 24.349376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.349810] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 24.350192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 24.350860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 24.734933] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 24.735849] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.736363] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 24.736745] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 24.737415] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 25.034066] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.138342] __ratelimit: 3 callbacks suppressed
[ 25.138352] type=1505 audit(1263651616.511:12): operation="profile_replace" pid=800 name=/usr/share/gdm/guest-session/Xsession
[ 25.142268] type=1505 audit(1263651616.515:13): operation="profile_replace" pid=801 name=/sbin/dhclient3
[ 25.143322] type=1505 audit(1263651616.515:14): operation="profile_replace" pid=801 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 25.143908] type=1505 audit(1263651616.515:15): operation="profile_replace" pid=801 name=/usr/lib/connman/scripts/dhclient-script
[ 25.189259] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x884793/0x0
[ 25.189272] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 25.262001] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 25.310548] type=1505 audit(1263651616.683:16): operation="profile_replace" pid=807 name=/usr/bin/evince
[ 25.520384] type=1505 audit(1263651616.895:17): operation="profile_replace" pid=807 name=/usr/bin/evince-previewer
[ 25.582631] type=1505 audit(1263651616.955:18): operation="profile_replace" pid=807 name=/usr/bin/evince-thumbnailer
[ 25.643154] type=1505 audit(1263651617.015:19): operation="profile_replace" pid=862 name=/usr/lib/cups/backend/cups-pdf
[ 25.644507] type=1505 audit(1263651617.019:20): operation="profile_replace" pid=862 name=/usr/sbin/cupsd
[ 25.670990] type=1505 audit(1263651617.043:21): operation="profile_replace" pid=863 name=/usr/sbin/tcpdump
[ 26.816206] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 26.816397] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.588629] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 27.588656] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 27.588685] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 27.837028] [drm] Setting GART location based on new memory map
[ 27.837044] [drm] Loading R100 Microcode
[ 27.837089] [drm] writeback test succeeded in 1 usecs
[ 28.938171] psmouse serio5: ID: 10 00 64
[ 34.416372] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[ 34.832527] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input6
[ 36.920054] eth0: no IPv6 routers present
[ 0.028057] ACPI: Core revision 20090521
[ 0.045636] ACPI: setting ELCR to 0200 (from 0800)
[ 0.048169] weird, boot CPU (#0) not listed by the BIOS.
[ 0.048175] SMP motherboard not detected.
[ 0.048181] Local APIC not detected. Using dummy APIC emulation.
[ 0.048185] SMP disabled
[ 0.048510] Brought up 1 CPUs
[ 0.048520] Total of 1 processors activated (2126.17 BogoMIPS).
[ 0.048553] CPU0 attaching NULL sched-domain.
[ 0.049195] Booting paravirtualized kernel on bare hardware
[ 0.052113] regulator: core version 0.5
[ 0.052146] Time: 14:19:51 Date: 01/16/10
[ 0.052284] NET: Registered protocol family 16
[ 0.052608] EISA bus registered
[ 0.052646] ACPI: bus type pci registered
[ 0.054099] PCI: PCI BIOS revision 2.10 entry at 0xf04b7, last bus=4
[ 0.054105] PCI: Using configuration type 1 for base access
[ 0.056506] bio: create slab <bio-0> at 0
[ 0.058068] ACPI: EC: Look up EC in DSDT
[ 0.086585] ACPI: Interpreter enabled
[ 0.086597] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.086644] ACPI: Using PIC for interrupt routing
[ 0.105284] ACPI: Power Resource [C13A] (on)
[ 0.105454] ACPI: Power Resource [C14E] (on)
[ 0.105622] ACPI: Power Resource [C156] (on)
[ 0.105704] ACPI: Power Resource [C15F] (on)
[ 0.105859] ACPI: Power Resource [C1DE] (off)
[ 0.106007] ACPI: Power Resource [C1DF] (off)
[ 0.106154] ACPI: Power Resource [C1E0] (off)
[ 0.107878] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.116869] ACPI: PCI Root Bridge [C03A] (0000:00)
[ 0.116960] pci 0000:00:00.0: reg 10 32bit mmio: [0x60000000-0x6fffffff]
[ 0.117091] pci 0000:00:1d.0: reg 20 io port: [0x4000-0x401f]
[ 0.117150] pci 0000:00:1d.1: reg 20 io port: [0x4020-0x403f]
[ 0.117209] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[ 0.117324] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.117333] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[ 0.117366] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.117377] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.117388] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.117398] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.117408] pci 0000:00:1f.1: reg 20 io port: [0x4060-0x406f]
[ 0.117419] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.117480] pci 0000:01:00.0: reg 10 32bit mmio: [0x48000000-0x4fffffff]
[ 0.117490] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.117500] pci 0000:01:00.0: reg 18 32bit mmio: [0x40200000-0x4020ffff]
[ 0.117518] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.117540] pci 0000:01:00.0: supports D1 D2
[ 0.117577] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.117585] pci 0000:00:01.0: bridge 32bit mmio: [0x40200000-0x402fffff]
[ 0.117593] pci 0000:00:01.0: bridge 32bit mmio pref: [0x48000000-0x4fffffff]
[ 0.117639] pci 0000:02:03.0: reg 10 32bit mmio: [0x40000000-0x40000fff]
[ 0.117661] pci 0000:02:03.0: supports D1 D2
[ 0.117667] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117675] pci 0000:02:03.0: PME# disabled
[ 0.117714] pci 0000:02:03.1: reg 10 32bit mmio: [0x40080000-0x40080fff]
[ 0.117736] pci 0000:02:03.1: supports D1 D2
[ 0.117742] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117749] pci 0000:02:03.1: PME# disabled
[ 0.117796] pci 0000:02:08.0: reg 10 32bit mmio: [0x40100000-0x40100fff]
[ 0.117807] pci 0000:02:08.0: reg 14 io port: [0x2400-0x243f]
[ 0.117846] pci 0000:02:08.0: supports D1 D2
[ 0.117852] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117859] pci 0000:02:08.0: PME# disabled
[ 0.117897] pci 0000:02:09.0: reg 10 io port: [0x2000-0x20ff]
[ 0.117945] pci 0000:02:09.0: supports D1 D2
[ 0.117950] pci 0000:02:09.0: PME# supported from D1 D2 D3hot
[ 0.117958] pci 0000:02:09.0: PME# disabled
[ 0.117991] pci 0000:00:1e.0: transparent bridge
[ 0.117998] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.118007] pci 0000:00:1e.0: bridge 32bit mmio: [0x40000000-0x401fffff]
[ 0.118055] pci_bus 0000:00: on NUMA node 0
[ 0.118066] ACPI: PCI Interrupt Routing Table [\_SB_.C03A._PRT]
[ 0.118163] ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C03B._PRT]
[ 0.118219] ACPI: PCI Interrupt Routing Table [\_SB_.C03A.C04E._PRT]
[ 0.135475] ACPI: PCI Interrupt Link [C0A6] (IRQs 5 10 *11)
[ 0.135849] ACPI: PCI Interrupt Link [C0A7] (IRQs 5 10 *11)
[ 0.136236] ACPI: PCI Interrupt Link [C0A8] (IRQs 5 10 *11)
[ 0.136608] ACPI: PCI Interrupt Link [C0A9] (IRQs 5 10 *11)
[ 0.136981] ACPI: PCI Interrupt Link [C0AA] (IRQs 5 10 *11)
[ 0.137333] ACPI: PCI Interrupt Link [C0AB] (IRQs 5 10 11) *0, disabled.
[ 0.137708] ACPI: PCI Interrupt Link [C0AC] (IRQs 5 10 *11)
[ 0.138060] ACPI: PCI Interrupt Link [C0AD] (IRQs 5 10 11) *0, disabled.
[ 0.138595] SCSI subsystem initialized
[ 0.138793] libata version 3.00 loaded.
[ 0.138999] usbcore: registered new interface driver usbfs
[ 0.139041] usbcore: registered new interface driver hub
[ 0.139105] usbcore: registered new device driver usb
[ 0.139413] ACPI: WMI: Mapper loaded
[ 0.139418] PCI: Using ACPI for IRQ routing
[ 0.139704] Bluetooth: Core ver 2.15
[ 0.139777] NET: Registered protocol family 31
[ 0.139782] Bluetooth: HCI device and connection manager initialized
[ 0.139790] Bluetooth: HCI socket layer initialized
[ 0.139795] NetLabel: Initializing
[ 0.139799] NetLabel: domain hash size = 128
[ 0.139803] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.139833] NetLabel: unlabeled traffic allowed by default
[ 0.145093] pnp: PnP ACPI init
[ 0.145167] ACPI: bus type pnp registered
[ 0.170579] pnp: PnP ACPI: found 14 devices
[ 0.170587] ACPI: ACPI bus type pnp unregistered
[ 0.170596] PnPBIOS: Disabled by ACPI PNP
[ 0.170622] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.170631] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.170639] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.170660] system 00:0b: ioport range 0x140-0x14f has been reserved
[ 0.170668] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.170676] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.170690] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 0.170698] system 00:0c: ioport range 0x1000-0x1087 could not be reserved
[ 0.170706] system 00:0c: ioport range 0x1100-0x113f has been reserved
[ 0.170713] system 00:0c: ioport range 0x1200-0x121f has been reserved
[ 0.170721] system 00:0c: iomem range 0xffc00000-0xffc003ff has been reserved
[ 0.170734] system 00:0d: iomem range 0xce000-0xcffff has been reserved
[ 0.205653] AppArmor: AppArmor Filesystem Enabled
[ 0.205709] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.205717] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.205725] pci 0000:00:01.0: MEM window: 0x40200000-0x402fffff
[ 0.205733] pci 0000:00:01.0: PREFETCH window: 0x48000000-0x4fffffff
[ 0.205751] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.205757] pci 0000:02:03.0: IO window: 0x002800-0x0028ff
[ 0.205766] pci 0000:02:03.0: IO window: 0x002c00-0x002cff
[ 0.205774] pci 0000:02:03.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.205783] pci 0000:02:03.0: MEM window: 0x2c000000-0x2fffffff
[ 0.205791] pci 0000:02:03.1: CardBus bridge, secondary bus 0000:04
[ 0.205797] pci 0000:02:03.1: IO window: 0x001400-0x0014ff
[ 0.205805] pci 0000:02:03.1: IO window: 0x001800-0x0018ff
[ 0.205813] pci 0000:02:03.1: PREFETCH window: 0x24000000-0x27ffffff
[ 0.205822] pci 0000:02:03.1: MEM window: 0x30000000-0x33ffffff
[ 0.205830] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.205837] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.205846] pci 0000:00:1e.0: MEM window: 0x40000000-0x401fffff
[ 0.205855] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x27ffffff
[ 0.205878] pci 0000:00:1e.0: setting latency timer to 64
[ 0.206444] ACPI: PCI Interrupt Link [C0AC] enabled at IRQ 11
[ 0.206452] PCI: setting IRQ 11 as level-triggered
[ 0.206461] pci 0000:02:03.0: PCI INT A -> Link[C0AC] -> GSI 11 (level, low) -> IRQ 11
[ 0.206480] pci 0000:02:03.1: PCI INT A -> Link[C0AC] -> GSI 11 (level, low) -> IRQ 11
[ 0.206494] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.206501] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.206508] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.206514] pci_bus 0000:01: resource 1 mem: [0x40200000-0x402fffff]
[ 0.206521] pci_bus 0000:01: resource 2 pref mem [0x48000000-0x4fffffff]
[ 0.206528] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.206535] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.206541] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x27ffffff]
[ 0.206548] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.206554] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.206561] pci_bus 0000:03: resource 0 io: [0x2800-0x28ff]
[ 0.206567] pci_bus 0000:03: resource 1 io: [0x2c00-0x2cff]
[ 0.206574] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff]
[ 0.206581] pci_bus 0000:03: resource 3 mem: [0x2c000000-0x2fffffff]
[ 0.206588] pci_bus 0000:04: resource 0 io: [0x1400-0x14ff]
[ 0.206594] pci_bus 0000:04: resource 1 io: [0x1800-0x18ff]
[ 0.206601] pci_bus 0000:04: resource 2 pref mem [0x24000000-0x27ffffff]
[ 0.206607] pci_bus 0000:04: resource 3 mem: [0x30000000-0x33ffffff]
[ 0.206706] NET: Registered protocol family 2
[ 0.206952] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.207649] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.207963] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.208349] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.208357] TCP reno registered
[ 0.208619] NET: Registered protocol family 1
[ 0.208789] Trying to unpack rootfs image as initramfs...
[ 0.646292] Freeing initrd memory: 7470k freed
[ 0.667000] speedstep-lib: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of500000 nSec.
[ 0.667025] cpufreq-nforce2: No nForce2 chipset.
[ 0.667089] Scanning for low memory corruption every 60 seconds
[ 0.667438] audit: initializing netlink socket (disabled)
[ 0.667484] type=2000 audit(1263651591.664:1): initialized
[ 0.685732] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.689700] VFS: Disk quotas dquot_6.5.2
[ 0.689846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.691311] fuse init (API version 7.12)
[ 0.691547] msgmni has been set to 993
[ 0.692040] alg: No test for stdrng (krng)
[ 0.692072] io scheduler noop registered
[ 0.692078] io scheduler anticipatory registered
[ 0.692083] io scheduler deadline registered
[ 0.692202] io scheduler cfq registered (default)
[ 0.692289] pci 0000:01:00.0: Boot video device
[ 0.692326] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.692512] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.692566] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.693098] ACPI: AC Adapter [C18D] (on-line)
[ 0.693253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.693263] ACPI: Power Button [PWRF]
[ 0.693387] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.693400] ACPI: Sleep Button [C18E]
[ 0.693499] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.693632] ACPI: Lid Switch [C18F]
[ 0.694000] fan PNP0C0B:00: registered as cooling_device0
[ 0.694013] ACPI: Fan [C1E1] (off)
[ 0.694310] fan PNP0C0B:01: registered as cooling_device1
[ 0.694324] ACPI: Fan [C1E2] (off)
[ 0.694621] fan PNP0C0B:02: registered as cooling_device2
[ 0.694634] ACPI: Fan [C1E3] (off)
[ 0.695261] Marking TSC unstable due to TSC halts in idle
[ 0.695297] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.695339] processor LNXCPU:00: registered as cooling_device3
[ 0.695706] Switched to high resolution mode on CPU 0
[ 0.712797] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.712814] ACPI: Thermal Zone [TZ1] (25 C)
[ 0.712929] isapnp: Scanning for PnP cards...
[ 1.082859] isapnp: No Plug & Play device found
[ 1.086399] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.086537] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.086984] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.089660] brd: module loaded
[ 1.090709] loop: module loaded
[ 1.090899] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.091144] ata_piix 0000:00:1f.1: version 2.13
[ 1.091168] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.091800] ACPI: PCI Interrupt Link [C0A8] enabled at IRQ 11
[ 1.091811] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0A8] -> GSI 11 (level, low) -> IRQ 11
[ 1.091897] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.096282] scsi0 : ata_piix
[ 1.096533] scsi1 : ata_piix
[ 1.097987] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4060 irq 14
[ 1.097995] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4068 irq 15
[ 1.100795] Fixed MDIO Bus: probed
[ 1.100883] PPP generic driver version 2.4.2
[ 1.101144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.101189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.101224] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.101888] ACPI: PCI Interrupt Link [C0A6] enabled at IRQ 11
[ 1.101899] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0A6] -> GSI 11 (level, low) -> IRQ 11
[ 1.101916] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.101923] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.102043] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.102085] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004000
[ 1.102297] usb usb1: configuration #1 chosen from 1 choice
[ 1.102393] hub 1-0:1.0: USB hub found
[ 1.102413] hub 1-0:1.0: 2 ports detected
[ 1.103038] ACPI: PCI Interrupt Link [C0A9] enabled at IRQ 11
[ 1.103047] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0A9] -> GSI 11 (level, low) -> IRQ 11
[ 1.103059] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.103066] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.103146] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.103177] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004020
[ 1.103356] usb usb2: configuration #1 chosen from 1 choice
[ 1.103417] hub 2-0:1.0: USB hub found
[ 1.103433] hub 2-0:1.0: 2 ports detected
[ 1.103521] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0A8] -> GSI 11 (level, low) -> IRQ 11
[ 1.103533] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.103540] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.103613] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.103642] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
[ 1.103808] usb usb3: configuration #1 chosen from 1 choice
[ 1.103868] hub 3-0:1.0: USB hub found
[ 1.103884] hub 3-0:1.0: 2 ports detected
[ 1.110571] PNP: PS/2 Controller [PNP0303:C15C,PNP0f0e:C15D] at 0x60,0x64 irq 1,12
[ 1.112253] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 1.112973] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.112988] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.112996] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.113003] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.113011] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.113147] mice: PS/2 mouse device common for all mice
[ 1.113385] rtc_cmos 00:08: RTC can wake from S4
[ 1.113467] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.113498] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.113743] device-mapper: uevent: version 1.0.3
[ 1.114435] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.114564] device-mapper: multipath: version 1.1.0 loaded
[ 1.114571] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.114901] EISA: Probing bus 0 at eisa.0
[ 1.114913] Cannot allocate resource for EISA slot 1
[ 1.114918] Cannot allocate resource for EISA slot 2
[ 1.114924] Cannot allocate resource for EISA slot 3
[ 1.114929] Cannot allocate resource for EISA slot 4
[ 1.114947] EISA: Detected 0 cards.
[ 1.115141] cpuidle: using governor ladder
[ 1.115271] cpuidle: using governor menu
[ 1.116598] TCP cubic registered
[ 1.117009] NET: Registered protocol family 10
[ 1.121920] lo: Disabled Privacy Extensions
[ 1.122718] NET: Registered protocol family 17
[ 1.122765] Bluetooth: L2CAP ver 2.13
[ 1.122770] Bluetooth: L2CAP socket layer initialized
[ 1.122777] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.122782] Bluetooth: SCO socket layer initialized
[ 1.122876] Bluetooth: RFCOMM TTY layer initialized
[ 1.122884] Bluetooth: RFCOMM socket layer initialized
[ 1.122889] Bluetooth: RFCOMM ver 1.11
[ 1.123673] Using IPI No-Shortcut mode
[ 1.123838] PM: Resume from disk failed.
[ 1.123875] registered taskstats version 1
[ 1.124139] Magic number: 10:924:333
[ 1.124184] tty tty54: hash matches
[ 1.124312] rtc_cmos 00:08: setting system clock to 2010-01-16 14:19:52 UTC (1263651592)
[ 1.124320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.124325] EDD information not available.
[ 1.136729] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.142389] ACPI: Battery Slot [C18A] (battery present)
[ 1.142590] ACPI: Battery Slot [C18B] (battery absent)
[ 1.204032] Clocksource tsc unstable (delta = -66184036 ns)
[ 1.260334] ata1.00: ATA-5: FUJITSU MHN2200AT, 7A56, max UDMA/100
[ 1.260342] ata1.00: 39070080 sectors, multi 16: LBA
[ 1.268245] ata2.01: both IDENTIFYs aborted, assuming NODEV
[ 1.276492] ata1.00: configured for UDMA/100
[ 1.276774] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHN2200A 7A56 PQ: 0 ANSI: 5
[ 1.277035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.277127] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 1.277261] sd 0:0:0:0: [sda] Write Protect is off
[ 1.277268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.277337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.277682] sda:
[ 1.277861] ata2.00: ATAPI: Compaq DVD-ROM GDR-8081N, 0010, max MWDMA2
[ 1.292255] ata2.00: configured for MWDMA2
[ 1.295529] sda1 sda2 <
[ 1.299861] scsi 1:0:0:0: CD-ROM Compaq DVD-ROM GDR8081N 0010 PQ: 0 ANSI: 5
[ 1.313485] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[ 1.313492] Uniform CD-ROM driver Revision: 3.20
[ 1.313688] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.313786] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.327228] sda5 >
[ 1.327805] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.327842] Freeing unused kernel memory: 540k freed
[ 1.328862] Write protecting the kernel text: 4568k
[ 1.328956] Write protecting the kernel read-only data: 1836k
[ 1.758398] Linux agpgart interface v0.103
[ 1.838388] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 2.020741] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x60000000
[ 2.056883] [drm] Initialized drm 1.1.0 20060810
[ 2.118251] [drm] radeon default to kernel modesetting DISABLED.
[ 2.119072] ACPI: PCI Interrupt Link [C0A7] enabled at IRQ 11
[ 2.119083] pci 0000:01:00.0: PCI INT A -> Link[C0A7] -> GSI 11 (level, low) -> IRQ 11
[ 2.119849] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 2.127726] Floppy drive(s): fd0 is 1.44M
[ 2.140375] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.140384] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.141140] ACPI: PCI Interrupt Link [C0AA] enabled at IRQ 11
[ 2.141151] e100 0000:02:08.0: PCI INT A -> Link[C0AA] -> GSI 11 (level, low) -> IRQ 11
[ 2.229403] e100 0000:02:08.0: PME# disabled
[ 2.232406] e100: eth0: e100_probe: addr 0x40100000, irq 11, MAC addr 00:02:a5:b8:bf:58
[ 2.234723] FDC 0 is a post-1991 82077
[ 3.963338] PM: Starting manual resume from disk
[ 3.963348] PM: Resume from partition 8:5
[ 3.963353] PM: Checking hibernation image.
[ 3.963697] PM: Resume from disk failed.
[ 3.996912] EXT4-fs (sda1): barriers enabled
[ 4.022826] kjournald2 starting: pid 323, dev sda1:8, commit interval 5 seconds
[ 4.022864] EXT4-fs (sda1): delayed allocation enabled
[ 4.022871] EXT4-fs: file extents enabled
[ 4.027318] EXT4-fs: mballoc enabled
[ 4.027356] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 5.323952] type=1505 audit(1263651596.698:2): operation="profile_load" pid=346 name=/usr/share/gdm/guest-session/Xsession
[ 5.329085] type=1505 audit(1263651596.703:3): operation="profile_load" pid=347 name=/sbin/dhclient3
[ 5.330126] type=1505 audit(1263651596.703:4): operation="profile_load" pid=347 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 5.330704] type=1505 audit(1263651596.703:5): operation="profile_load" pid=347 name=/usr/lib/connman/scripts/dhclient-script
[ 5.429034] type=1505 audit(1263651596.803:6): operation="profile_load" pid=348 name=/usr/bin/evince
[ 5.447667] type=1505 audit(1263651596.819:7): operation="profile_load" pid=348 name=/usr/bin/evince-previewer
[ 5.458677] type=1505 audit(1263651596.831:8): operation="profile_load" pid=348 name=/usr/bin/evince-thumbnailer
[ 5.492539] type=1505 audit(1263651596.867:9): operation="profile_load" pid=350 name=/usr/lib/cups/backend/cups-pdf
[ 5.493832] type=1505 audit(1263651596.867:10): operation="profile_load" pid=350 name=/usr/sbin/cupsd
[ 22.617079] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k
[ 22.631905] udev: starting version 147
[ 22.801565] lp: driver loaded but no devices found
[ 22.974170] EXT4-fs (sda1): internal journal on sda1:8
[ 22.976921] parport_pc 00:04: reported by Plug and Play ACPI
[ 22.976962] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 23.074932] lp0: using parport0 (interrupt-driven).
[ 23.075505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.081112] intel_rng: FWH not detected
[ 23.488574] yenta_cardbus 0000:02:03.0: CardBus bridge found [0e11:004e]
[ 23.488598] yenta_cardbus 0000:02:03.0: Enabling burst memory read transactions
[ 23.488606] yenta_cardbus 0000:02:03.0: Using CSCINT to route CSC interrupts to PCI
[ 23.488612] yenta_cardbus 0000:02:03.0: Routing CardBus interrupts to PCI
[ 23.488621] yenta_cardbus 0000:02:03.0: TI: mfunc 0x01001002, devctl 0x64
[ 23.501034] psmouse.c: Failed to reset mouse on isa0060/serio4
[ 23.872127] ppdev: user-space parallel port driver
[ 23.897195] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0438, PCI irq 11
[ 23.897205] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 23.897221] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 23.897231] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 23.897662] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x401fffff
[ 23.897670] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 23.897999] yenta_cardbus 0000:02:03.1: CardBus bridge found [0e11:004e]
[ 23.898019] yenta_cardbus 0000:02:03.1: Using CSCINT to route CSC interrupts to PCI
[ 23.898026] yenta_cardbus 0000:02:03.1: Routing CardBus interrupts to PCI
[ 23.898035] yenta_cardbus 0000:02:03.1: TI: mfunc 0x01001002, devctl 0x64
[ 24.053541] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.140562] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0438, PCI irq 11
[ 24.140572] yenta_cardbus 0000:02:03.1: Socket status: 30000006
[ 24.140581] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 24.140600] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 24.140609] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x2fff: clean.
[ 24.141041] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x401fffff
[ 24.141049] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 24.273639] Maestro3 0000:02:09.0: PCI INT A -> Link[C0A6] -> GSI 11 (level, low) -> IRQ 11
[ 24.273656] Maestro3 0000:02:09.0: firmware: requesting ess/maestro3_assp_kernel.fw
[ 24.329510] Maestro3 0000:02:09.0: firmware: requesting ess/maestro3_assp_minisrc.fw
[ 24.348459] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 24.349376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.349810] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 24.350192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 24.350860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 24.734933] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 24.735849] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.736363] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 24.736745] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 24.737415] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 25.034066] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.138342] __ratelimit: 3 callbacks suppressed
[ 25.138352] type=1505 audit(1263651616.511:12): operation="profile_replace" pid=800 name=/usr/share/gdm/guest-session/Xsession
[ 25.142268] type=1505 audit(1263651616.515:13): operation="profile_replace" pid=801 name=/sbin/dhclient3
[ 25.143322] type=1505 audit(1263651616.515:14): operation="profile_replace" pid=801 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 25.143908] type=1505 audit(1263651616.515:15): operation="profile_replace" pid=801 name=/usr/lib/connman/scripts/dhclient-script
[ 25.189259] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x884793/0x0
[ 25.189272] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 25.262001] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 25.310548] type=1505 audit(1263651616.683:16): operation="profile_replace" pid=807 name=/usr/bin/evince
[ 25.520384] type=1505 audit(1263651616.895:17): operation="profile_replace" pid=807 name=/usr/bin/evince-previewer
[ 25.582631] type=1505 audit(1263651616.955:18): operation="profile_replace" pid=807 name=/usr/bin/evince-thumbnailer
[ 25.643154] type=1505 audit(1263651617.015:19): operation="profile_replace" pid=862 name=/usr/lib/cups/backend/cups-pdf
[ 25.644507] type=1505 audit(1263651617.019:20): operation="profile_replace" pid=862 name=/usr/sbin/cupsd
[ 25.670990] type=1505 audit(1263651617.043:21): operation="profile_replace" pid=863 name=/usr/sbin/tcpdump
[ 26.816206] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 26.816397] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.588629] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 27.588656] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 27.588685] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 27.837028] [drm] Setting GART location based on new memory map
[ 27.837044] [drm] Loading R100 Microcode
[ 27.837089] [drm] writeback test succeeded in 1 usecs
[ 28.938171] psmouse serio5: ID: 10 00 64
[ 34.416372] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[ 34.832527] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input6
[ 36.920054] eth0: no IPv6 routers present
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
miramaze
Messages postés
1429
Date d'inscription
mercredi 29 juillet 2009
Statut
Contributeur
Dernière intervention
1 mai 2022
92
16 janv. 2010 à 17:40
16 janv. 2010 à 17:40
Est ce que les effets visuels sont activés dans Système > Préférences > Apparences > effets visuels si oui désactive les. Tu peux également taper lspci et coller le résultat ici.
ludo7684
Messages postés
384
Date d'inscription
dimanche 15 février 2009
Statut
Membre
Dernière intervention
18 mai 2016
15
16 janv. 2010 à 21:29
16 janv. 2010 à 21:29
eridulia76@eridulia76-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:03.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:03.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller (rev 42)
02:09.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
eridulia76@eridulia76-laptop:~$
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
02:03.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:03.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller (rev 42)
02:09.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
eridulia76@eridulia76-laptop:~$
ludo7684
Messages postés
384
Date d'inscription
dimanche 15 février 2009
Statut
Membre
Dernière intervention
18 mai 2016
15
16 janv. 2010 à 21:34
16 janv. 2010 à 21:34
j crois que le problème est résolu les effets visuels étaient activés je les ai désactivé comme tu me l'a dis et les pages s affichent très bien!!!! merci beaucoup!!!!
miramaze
Messages postés
1429
Date d'inscription
mercredi 29 juillet 2009
Statut
Contributeur
Dernière intervention
1 mai 2022
92
17 janv. 2010 à 01:29
17 janv. 2010 à 01:29
Tant mieux et y'a pas de quoi
