Help

Bonjour, voila j'ai acheté un graveur DVD de réfrence suivant:
(E:) LITE-ON DVDRW SOHW-1653S(USB:0) detail information.
Vendor Identification: LITE-ON
Product Identification: DVDRW SOHW-1653S
Production Revision Level: CS07
Location: USBSTOR, Port 0, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), TAO, DVD DAO
BURN-Free Technology: SMART-BURN
Auto-Select best write speed: SMART-BURN
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: No/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: No
C2 Pointers Support: Yes
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
Maximum Read Speed Supported (with current disc): 63X (9450 Ko/Sec)
Maximum Write Speed Supported (with current Disc): 31X (4650 Ko/Sec)
Current Read Speed Supported (with current Disc): 63X (9450 Ko/Sec)
Current Write Speed Supported (with current Disc): 31X (4650 Ko/Sec)

Mon problème c'est depuis je veux graver avec un DVD+R, sa me refuse, c'est a dire: J'ai alcohol 120% je pense que c'est la dernière version. Je souhaite graver une image sur un DVD+R. La mise en tampon commence puis il m'indique que la gravure a échoué, sa note sa :
Dumping/Recording Progress Log #######################
00:56:40 Infos processeur : mobile AMD Athlon(tm) XP-M 2500+ (663MHz)
00:56:40 Mémoire disponible pour Windows :228 848 KB
00:56:40 Pas assez de mémoire ! Ajuster la taille de la mémoire tampon à 65 Mo.
00:56:41 Lecture du fichier image: C:\SD6.MDS
00:56:41 DVD Source Info : Session: 1, Piste: 1, Nombre de secteurs: 4.06 GB / 473:09:09
00:56:44 (E:) LITE-ON DVDRW SOHW-1653S(USB:0): Turn off "Auto-Select best write speed" function
00:56:44 (E:) LITE-ON DVDRW SOHW-1653S(USB:0): Méthode d'écriture / Vitesse
00:56:44 Gravure - DVD DAO - 4.0X (5540 Ko/Sec)
(E:) LITE-ON DVDRW SOHW-1653S(USB:0) - Media format:DVD+R
00:56:51 (E:) LITE-ON DVDRW SOHW-1653S(USB:0) - [Write ERROR] LBA: 0, Length: 16
S:KEY - 03/73/02 - "Power Calibration Area is Full"
00:56:51 (E:) LITE-ON DVDRW SOHW-1653S(USB:0): Gravure échouée !
00:56:51 Message d'erreur [03/73/02] - Power Calibration Area is Full
00:56:51 (E:) LITE-ON DVDRW SOHW-1653S(USB:0): Gravure échouée !
00:56:51 Lecture du fichier image annulée !

J'ai ajuster la mémoire tampon sa change rien.
Avant cela, je gravais sur un DVD-R SA MARCHAIT MAIS LA.
Merci de m'aider je ni connais rien.

Référence PC:
Windows XP Home Edition 5.1 Service Pack 1 (Build 2600)
Processor info: mobile AMD Athlon(tm) XP-M 2500+ (663MHz)
Memory Available to Windows: 228 848 KB