Plantage PC gravure avec Nero sur Vista
Résolu/Fermé
A voir également:
- Plantage PC gravure avec Nero sur Vista
- Logiciel de gravure gratuit nero - Télécharger - Gravure
- Nero Burning Rom - Télécharger - Gravure
- Benchmark pc - Guide
- Reinitialiser pc - Guide
- Pc lent - Guide
8 réponses
salut,
ton graveur est de marque lg.
que graves-tu?
nero est-il a jour?
post un log nero,tuto ici;
http://www.faq-nero.com/faq022.php
http://www.help-info.net/...
ton graveur est de marque lg.
que graves-tu?
nero est-il a jour?
post un log nero,tuto ici;
http://www.faq-nero.com/faq022.php
http://www.help-info.net/...
Merci SV, au moins je connais déjà la marque ;)
J'ai essayé d'abord avec la dernière version disponible sur le site de Nero (à savoir 7.9.6.0), en version démo, puis avec une version 7.5 ou 7.6 quelque-chose (désinstallée depuis, donc pas sûr de la version), qu'un ami utilise sur Vista et qui est stable sur sa config.
Voici le logfile des 5 dernières tentatives, en espérant que ça puisse aider:
[MMC]
0000=No additional sense information
0006=I/O process terminated
0011=Audio play in progress
0017=Cleaning requested
0200=No seek complete
0400=Logical unit not ready, cause not reportable
0401=Logical unit in process of becoming ready
0402=Logical unit not ready, initialization command required
0403=Logical unit not ready, manual intervention required
0404=Logical unit not ready, format in progress
0407=Logical unit not ready, operation in progress
0408=Logical unit not ready, long write in progress
0500=Logical unit does not respond to selection
0600=No reference position found
0700=Multiple peripherial devices selected
0800=Logical unit communication failure
0801=Logical unit communication timeout
0802=Logical unit communication parity error
0803=Logical unit communication CRC error (Ultra-DMA/32)
0900=Track following error
0901=Tracking servo failure
0902=Focus servo failure
0903=Spindle servo failure
0904=Head select fault
0a00=Error log overflow
0b00=Warning
0b01=Warning, specified temperaturee exceeded
0b02=Warning, enclosure degraded
0c00=Write error
0c07=Write error, recovery needed
0c08=Write error, recovery failed
0c09=Write error, loss of streaming
0c0a=Write error, padding blocks added
1000=Invalid block size for command
1001=Packet does not fit into available space
1002=Buffer underrun
1100=Unrecovered read error
1101=Read retries exhausted
1102=Error too long to correct
1105=L-EC uncorrectable error
1106=CIRC unrecovered error
110f=Error reading UPC/EAN number
1110=Error reading ISRC number
1111=Read error, loss of streaming
1500=Random positioning error
1501=Mechanical positioning error
1502=Positioning error detected by reading disc
1700=Recovered data with no error correction applied
1701=Recovered data with retries
1702=Recovered data with positive head offset
1703=Recovered data with negative head offset
1704=Recovered data with retries and/or CIRC applied
1705=Recovered data using previous sector id
1707=Recovered data without ECC - recommend reassignment
1708=Recovered data without ECC - recommend rewrite
1709=Recovered data without ECC - data rewritten
1800=Recovered data with error correction applied
1801=Recovered data with error correction & retries applied
1802=Recovered data - data auto-reallocated
1803=Recovered data with CIRC
1804=Recovered data with L-EC
1805=Recovered data - recommend reassignment
1806=Recovered data - recommend rewrite
1a00=Parameter list length error
1b00=Synchronous data transfer error
1d00=Miscompare during verify operation
2000=Invalid command operation code
2100=Logical block out of range
2101=Invalid element address
2102=Invalid address for write
2200=Illegal function
2400=Invalid field in CDB
2500=Logical unit not supported
2600=Invalid field in parameter list
2601=Parameter not supported
2602=Parameter value invalid
2603=Threshold parameters not supported
2604=Invalid release of active persistent reservation
2700=Write protected
2701=Hardware write protected
2702=Logical unit software write protected
2703=Associated write protect
2704=Persistent write protect
2705=Permanent write protect
2800=Not ready to change, disc may have changed
2801=Import or export element accessed
2900=Power on reset or bus device reset occurred
2901=Power on occurred
2902=SCSI bus reset occurred
2903=Bus device reset function occurred
2904=Device internal reset
2a00=Parameters changed
2a01=Mode parameters changed
2a02=Log parameters changed
2a03=Reservations preempted
2b00=Copy cannot execute since host cannot disconnect
2c00=Command sequence error
2c03=Current program area is not empty
2c04=Current program area is empty
2c05=Persistent prevent conflict
2e00=Insufficient time for operation
2f00=Commands cleared by another initiator
3000=Incompatible disc installed
3001=Cannot read disc - unknown format
3002=Cannot read disc - incompatible format
3003=Cleaning cartridge installed
3004=Cannot write disc - unknown format
3005=Cannot write disc - incompatible format
3006=Cannot format disc - incompatible disc
3007=Cleaning failure
3008=Cannot write - application code mismatch
3009=Current session not fixated for append
3100=Disc format corrupted
3101=Format command failed
3400=Enclosure failure
3500=Enclosure services failure
3501=Unsupported enclosure failure
3502=Enclosure services unavailable
3503=Enclosure services transfer failure
3504=Enclosure services transfer refused
3700=Rounded parameter
3900=Saving parameters not supported
3a00=Disc not present
3a01=Disc not present - tray closed
3a02=Disc not present - tray open
3b0d=Disc destination element full
3b0e=Disc source element empty
3b0f=End of disc reached
3b11=Disc magazine not accessible
3b12=Disc magazine removed
3b13=Disc magazine inserted
3b14=Disc magazine locked
3b15=Disc magazine unlocked
3d00=Invalid bits in identify message
3e00=Logical unit has not self-configured yet
3e01=Logical unit failure
3e02=Timeout on logical unit
3f00=Target operating conditions have changed
3f01=Microcode has been changed
3f02=Changed operating definition
3f03=Inquiry data has changed
4000=Diagnostic failure on component
4300=Message error
4400=Internal target failure
4500=Select or reselect failure
4600=Unsuccessful soft reset
4700=SCSI parity error
4800=Initiator detected error message received
4900=Invalid message error
4a00=Command phase error
4b00=Data phase error
4c00=Logical unit failed self-configuration
4d00=Tagged overlapped commands
4e00=Overlapped commands attempted
5100=Erase failure
5101=Erase failure - incomplete erase operation detected
5300=Disc load or eject failed
5302=Disc removal prevented
5380=Eject button is pressed in prevent condition
5700=Unable to recover table of contents
5a00=Operator request or state change input
5a01=Operator disc removal request
5a02=Operator selected write protect
5a03=Operator selected write permit
5b00=Log exception
5b01=Threshold condition met
5b02=Log counter at maximum
5b03=Log list codes exhausted
5d00=Failure prediction threshold exceeded
5dff=Failure prediction threshold exceeded (FALSE)
5e00=Low power condition on
5e01=Idle condition activated by timer
5e02=Standby condition activated by timer
5e03=Idle condition activated by command
5e04=Standby condition activated by command
6000=Lamp failure
6100=Video acquisition error
6101=Unable to acquire video
6102=Out of focus
6300=End of user area encountered on this track
6301=Packet does not fit in available space
6400=Illegal mode for this track
6401=Invalid packet size
64C0=Illegal speed for this disc
6500=Voltage fault
7200=Session fixation error
7201=Session fixation error writing lead-in
7202=Session fixation error writing lead-out
7203=Session fixation error - incomplete track in session
7204=Empty or partially written reserved track
7300=CD control error
7301=Power calibration area almost full
7302=Power calibration area is full
7303=Power calibration area error
7304=Program memory area update failure
7305=Program memory area is full
7306=RMA/PMA is almost full
8900=Inappropriate command
9082=Read Write Control Task Error
9141=Mechanism Control Task Error
91A1=Mechanism Control Task Error
C100=Illegal track status
C200=Reserved track present
C400=Illegal reserve length for reserve track command
C500=Buffer underrun
C601=Unwritten area encountered
C602=Link blocks encountered
CC00=Not enough space
CD00=No track present to close session
CE00=Unrecordable track descriptor encountered
CF00=Damaged track present
D000=PMA area full
D100=PCA area full
D400=Exit from pseudo Track-at-once recording
[NEROAPI]
2=Initialization failed
3=Read error
4=Write error
5=Aborted by user
6=The current recorder does not support Disc-at-once recording.
7=Error:\nCannot connect TRF.
8=Unknown NeroAPI error
[NEROAPISTRINGS]
1=PCM Wave File (PCM) (*.wav)
2=No Filter
3=unknown
4=Not Available
5=Could not save CD-ROM settings. Reason:
6=KB/s
7=MB
8=New
9=%s KB (%s bytes)
10=Data (mode 1)\nData (mode 2)\nData (mode 2)\nData (mode 2)\nData (mode 2)\nData (mode 1)\nData (mode 2)\nAudio\nAudio\nUnknown
11=image.nrg
12=??? Untested ???\nUnknown\nAudio\nISO 9660\nHFS\nHybrid\nCD-ROM Mode 1\nCD-ROM Mode 2/XA\nISO 9660 Mode 2/XA\nJoliet\nDVD-ROM
13=An error occurred while loading the cue sheet file\n'%s'.\n(Line %d).
14=Free space is %d MB. Size of image file is %d MB.
15=Cannot load image file
16=You have mounted a UDF CD. To continue, please eject this CD first.
17=Warning: Your UDF packet writing software could not be disabled.
18=The necessary Nero driver could not be installed.
19=The Win-ASPI file '%s' cannot be found, therefore\nyou can currently select only image recorders.\n\nPlease check for correct Windows ASPI Manager installation\nof your SCSI Host Adapter Software.
20=The driver '%s' was not recognized. It will be ignored\nand can probably be deleted.
21=Sorry, this Nero version can only be used with the recorder it has been bundled with.\n\nTo receive a full version of Nero, please contact sales@nero.com\nor visit our web site https://www.nero.com/eng/
22=Sorry, this Nero version supports %s recorders only.\n\nTo receive a full version of Nero, please contact sales@nero.com\nor visit our web site https://www.nero.com/eng/
23=The audio file '%s' is invalid (required: 44.1 kHz, 16 bit, stereo).
24=This folder already contains a folder named '%s'
25=This folder already contains a file named '%s'
26=Total files=%d, identical=%d, different=%d, inaccessible=%d, skipped=%d.
27=%s at COM%i
28=The Nero serial number has expired.\nOnly the slowest burning speed will be available.
29=The file format is not supported.
30=Reading disc
31=Writing to cache
32=Testing speed
33=Simulating
34=Writing to disc
35=Verifying disc
36=The file %s, a component of backup restoration program NRESTORE cannot be located.\nPlease make sure that all components are properly installed.
37=The installation path cannot be located!
38=The selected hard drive cannot be locked.\nMaybe it is locked by another application.\nIn this case the backup may fail.\nDo you wish to continue?
39=The file system of selected partition cannot be recognized.\nThis partition cannot be backed up using data compression.
40=The selected partition is formatted with a file system not supported for reorganizing.\nThis partition cannot be backed up using data compression.
41=An error occurred while creating backup items.\nThe operation will be aborted.
42=Due to patent license restrictions, MPEG-2 encoding/converting is not available.\nTo add this feature, please purchase the DVD-Video Plug-in at https://www.nero.com/eng/
43=Simulation not possible for this type of disc. Skipping simulation.
44=Simulation not possible for this type of disc.
45=Can only write at %s instead of %s to current disc.
46=No common write speed for these recorders.
47=File name is not correct or file was not found.
48=The boot image file '%s' could not be found.\nAll backup data will be written to the disc, but the first backup disc will not be bootable.\nDo you wish to continue?
49=Sorry, this kind of compilation cannot be written on the selected recorder(s). Please select a different recorder or modify the settings of your compilation.
50=Unfortunately your multisession disc is now full. The remaining\nfree space of %d MB on this disc is insufficient to write your\ndata of %d MB.\nTherefore this multisession backup cannot be\ncontinued.\n\nPlease start a new multisession backup on a blank disc.
51=Simulation not allowed with DRM-protected files!
52=Speed test not allowed with DRM-protected files!
53=Danish
54=Dutch
55=English (United Kingdom)
56=English (United States)
57=Finnish
58=French (Belgium)
59=French (Canada)
60=French (France)
61=French (Switzerland)
62=German (Germany)
63=German (Switzerland)
64=Hungarian
65=Italian
66=Norwegian
67=Portuguese
68=Russian
69=Spanish (Latin America)
70=Spanish (Spain)
71=Swedish
72=Turkish
73=Writing data files
74=Finalizing disc
75=Error writing file %s
76=Error reading file %s
77=Preparation of item '%s' failed.
78=A backup with the same name already exists at the selected position.\nDo you really want to overwrite it?
79=You are burning a disc with UDF version 2.50 or higher.\nWindows XP and earlier versions will not be able to mount this disc.
80=You have inserted a disc (DVD+RW, DVD-RAM, HD DVD-RAM, or BD-RE)\nwhich is not compatible with UDF virtual partition.\nThe result may not be readable.\nOnly CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, HD DVD-R, HD DVD-RW, and BD-R\nare compatible with UDF virtual partition.
81=Can only write at %dx instead of %dx,\nbecause speed of source data is too slow
82=empty
83=%s activated
[NEROAPIWAITCDTEXTS]
0=Please insert the disc to write to...
1=Please insert a disc to use during simulation...\n\n(Nothing will be written on the disc.)
2=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. The disc will be reloaded automatically before continuing with burning...
3=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. Please reinsert the disc...
4=Please remove the disc and insert the next recordable disc to write to...
5=Please insert the original disc.
6=This disc is not writable.\n\nPlease insert a writable disc...
7=There is not enough space to burn this compilation to this disc.\n\nPlease insert another disc that has enough space...
8=The disc is blank, invalid\nor a multisession disc.\n\nPlease insert original disc...
9=The disc is not empty.\n\nPlease insert an empty disc.
10=Please insert an empty disc to write to...
11=Please insert an empty disc to use during simulation...\n\n(Nothing will be written on the disc.)
12=The disc is blank.\n\nPlease insert original disc...
13=Checking for the disc, please wait...\n\nTo burn this multisession compilation you need the disc containing the previous backup sessions. Please insert this disc if you have not already done so.
14=To simulate this multisession compilation you need the disc containing the previous backup sessions. Please insert this disc. (Nothing will be written on disc.)
15=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. Please reinsert the\nsame multisession disc...
16=Disc analysis failed. The error log\ncontains more information about the reason why it failed.
17=The recorder does not support this type of disc!\n\nPlease insert a correct disc to write to...
18=Please do not remove the disc!\n\nYour recorder requires that the disc be ejected between burning and verification. The disc will be reloaded automatically when burning is to continue...
19=Please do not remove the disc!\n\nYour recorder requires the disc to be ejected between burning and verification. Please reinsert the disc...
20=The disc is not formatted. Please insert a formatted disc.
21=Sorry, your compilation cannot be written on this kind of disc. Please insert a disc of the correct type or modify the settings of your compilation to make them compatible with the current disc.
22=--- Accessing disc, please wait ---
23=The disc is not empty.
24=There is not enough space to burn the compilation onto this disc.
25=There is not enough space to burn the compilation onto this disc.\n\nPlease insert an 80 min/700 MB disc.
26=Can write multisession or unfinalized DVD-R DL in UDF format only.
27=Can write multisession or unfinalized DVD-R DL on recorders with Layer Jump Recording support only.
28=The UDF parameters contain illegal values.
29=UDF Multisession on multiple recorders is not supported.
30=Sparable partition type not supported in case multisession is used.
31=You are trying to burn a disc with a virtual or sparable UDF partition using UDF version 1.02.\nThis is not possible. Please use UDF version 1.50 or above.
32=You are trying to burn a BD-R multisession disc with an UDF version below 2.60.\nThis is not possible. Please use UDF version 2.60 instead.
J'ai essayé d'abord avec la dernière version disponible sur le site de Nero (à savoir 7.9.6.0), en version démo, puis avec une version 7.5 ou 7.6 quelque-chose (désinstallée depuis, donc pas sûr de la version), qu'un ami utilise sur Vista et qui est stable sur sa config.
Voici le logfile des 5 dernières tentatives, en espérant que ça puisse aider:
[MMC]
0000=No additional sense information
0006=I/O process terminated
0011=Audio play in progress
0017=Cleaning requested
0200=No seek complete
0400=Logical unit not ready, cause not reportable
0401=Logical unit in process of becoming ready
0402=Logical unit not ready, initialization command required
0403=Logical unit not ready, manual intervention required
0404=Logical unit not ready, format in progress
0407=Logical unit not ready, operation in progress
0408=Logical unit not ready, long write in progress
0500=Logical unit does not respond to selection
0600=No reference position found
0700=Multiple peripherial devices selected
0800=Logical unit communication failure
0801=Logical unit communication timeout
0802=Logical unit communication parity error
0803=Logical unit communication CRC error (Ultra-DMA/32)
0900=Track following error
0901=Tracking servo failure
0902=Focus servo failure
0903=Spindle servo failure
0904=Head select fault
0a00=Error log overflow
0b00=Warning
0b01=Warning, specified temperaturee exceeded
0b02=Warning, enclosure degraded
0c00=Write error
0c07=Write error, recovery needed
0c08=Write error, recovery failed
0c09=Write error, loss of streaming
0c0a=Write error, padding blocks added
1000=Invalid block size for command
1001=Packet does not fit into available space
1002=Buffer underrun
1100=Unrecovered read error
1101=Read retries exhausted
1102=Error too long to correct
1105=L-EC uncorrectable error
1106=CIRC unrecovered error
110f=Error reading UPC/EAN number
1110=Error reading ISRC number
1111=Read error, loss of streaming
1500=Random positioning error
1501=Mechanical positioning error
1502=Positioning error detected by reading disc
1700=Recovered data with no error correction applied
1701=Recovered data with retries
1702=Recovered data with positive head offset
1703=Recovered data with negative head offset
1704=Recovered data with retries and/or CIRC applied
1705=Recovered data using previous sector id
1707=Recovered data without ECC - recommend reassignment
1708=Recovered data without ECC - recommend rewrite
1709=Recovered data without ECC - data rewritten
1800=Recovered data with error correction applied
1801=Recovered data with error correction & retries applied
1802=Recovered data - data auto-reallocated
1803=Recovered data with CIRC
1804=Recovered data with L-EC
1805=Recovered data - recommend reassignment
1806=Recovered data - recommend rewrite
1a00=Parameter list length error
1b00=Synchronous data transfer error
1d00=Miscompare during verify operation
2000=Invalid command operation code
2100=Logical block out of range
2101=Invalid element address
2102=Invalid address for write
2200=Illegal function
2400=Invalid field in CDB
2500=Logical unit not supported
2600=Invalid field in parameter list
2601=Parameter not supported
2602=Parameter value invalid
2603=Threshold parameters not supported
2604=Invalid release of active persistent reservation
2700=Write protected
2701=Hardware write protected
2702=Logical unit software write protected
2703=Associated write protect
2704=Persistent write protect
2705=Permanent write protect
2800=Not ready to change, disc may have changed
2801=Import or export element accessed
2900=Power on reset or bus device reset occurred
2901=Power on occurred
2902=SCSI bus reset occurred
2903=Bus device reset function occurred
2904=Device internal reset
2a00=Parameters changed
2a01=Mode parameters changed
2a02=Log parameters changed
2a03=Reservations preempted
2b00=Copy cannot execute since host cannot disconnect
2c00=Command sequence error
2c03=Current program area is not empty
2c04=Current program area is empty
2c05=Persistent prevent conflict
2e00=Insufficient time for operation
2f00=Commands cleared by another initiator
3000=Incompatible disc installed
3001=Cannot read disc - unknown format
3002=Cannot read disc - incompatible format
3003=Cleaning cartridge installed
3004=Cannot write disc - unknown format
3005=Cannot write disc - incompatible format
3006=Cannot format disc - incompatible disc
3007=Cleaning failure
3008=Cannot write - application code mismatch
3009=Current session not fixated for append
3100=Disc format corrupted
3101=Format command failed
3400=Enclosure failure
3500=Enclosure services failure
3501=Unsupported enclosure failure
3502=Enclosure services unavailable
3503=Enclosure services transfer failure
3504=Enclosure services transfer refused
3700=Rounded parameter
3900=Saving parameters not supported
3a00=Disc not present
3a01=Disc not present - tray closed
3a02=Disc not present - tray open
3b0d=Disc destination element full
3b0e=Disc source element empty
3b0f=End of disc reached
3b11=Disc magazine not accessible
3b12=Disc magazine removed
3b13=Disc magazine inserted
3b14=Disc magazine locked
3b15=Disc magazine unlocked
3d00=Invalid bits in identify message
3e00=Logical unit has not self-configured yet
3e01=Logical unit failure
3e02=Timeout on logical unit
3f00=Target operating conditions have changed
3f01=Microcode has been changed
3f02=Changed operating definition
3f03=Inquiry data has changed
4000=Diagnostic failure on component
4300=Message error
4400=Internal target failure
4500=Select or reselect failure
4600=Unsuccessful soft reset
4700=SCSI parity error
4800=Initiator detected error message received
4900=Invalid message error
4a00=Command phase error
4b00=Data phase error
4c00=Logical unit failed self-configuration
4d00=Tagged overlapped commands
4e00=Overlapped commands attempted
5100=Erase failure
5101=Erase failure - incomplete erase operation detected
5300=Disc load or eject failed
5302=Disc removal prevented
5380=Eject button is pressed in prevent condition
5700=Unable to recover table of contents
5a00=Operator request or state change input
5a01=Operator disc removal request
5a02=Operator selected write protect
5a03=Operator selected write permit
5b00=Log exception
5b01=Threshold condition met
5b02=Log counter at maximum
5b03=Log list codes exhausted
5d00=Failure prediction threshold exceeded
5dff=Failure prediction threshold exceeded (FALSE)
5e00=Low power condition on
5e01=Idle condition activated by timer
5e02=Standby condition activated by timer
5e03=Idle condition activated by command
5e04=Standby condition activated by command
6000=Lamp failure
6100=Video acquisition error
6101=Unable to acquire video
6102=Out of focus
6300=End of user area encountered on this track
6301=Packet does not fit in available space
6400=Illegal mode for this track
6401=Invalid packet size
64C0=Illegal speed for this disc
6500=Voltage fault
7200=Session fixation error
7201=Session fixation error writing lead-in
7202=Session fixation error writing lead-out
7203=Session fixation error - incomplete track in session
7204=Empty or partially written reserved track
7300=CD control error
7301=Power calibration area almost full
7302=Power calibration area is full
7303=Power calibration area error
7304=Program memory area update failure
7305=Program memory area is full
7306=RMA/PMA is almost full
8900=Inappropriate command
9082=Read Write Control Task Error
9141=Mechanism Control Task Error
91A1=Mechanism Control Task Error
C100=Illegal track status
C200=Reserved track present
C400=Illegal reserve length for reserve track command
C500=Buffer underrun
C601=Unwritten area encountered
C602=Link blocks encountered
CC00=Not enough space
CD00=No track present to close session
CE00=Unrecordable track descriptor encountered
CF00=Damaged track present
D000=PMA area full
D100=PCA area full
D400=Exit from pseudo Track-at-once recording
[NEROAPI]
2=Initialization failed
3=Read error
4=Write error
5=Aborted by user
6=The current recorder does not support Disc-at-once recording.
7=Error:\nCannot connect TRF.
8=Unknown NeroAPI error
[NEROAPISTRINGS]
1=PCM Wave File (PCM) (*.wav)
2=No Filter
3=unknown
4=Not Available
5=Could not save CD-ROM settings. Reason:
6=KB/s
7=MB
8=New
9=%s KB (%s bytes)
10=Data (mode 1)\nData (mode 2)\nData (mode 2)\nData (mode 2)\nData (mode 2)\nData (mode 1)\nData (mode 2)\nAudio\nAudio\nUnknown
11=image.nrg
12=??? Untested ???\nUnknown\nAudio\nISO 9660\nHFS\nHybrid\nCD-ROM Mode 1\nCD-ROM Mode 2/XA\nISO 9660 Mode 2/XA\nJoliet\nDVD-ROM
13=An error occurred while loading the cue sheet file\n'%s'.\n(Line %d).
14=Free space is %d MB. Size of image file is %d MB.
15=Cannot load image file
16=You have mounted a UDF CD. To continue, please eject this CD first.
17=Warning: Your UDF packet writing software could not be disabled.
18=The necessary Nero driver could not be installed.
19=The Win-ASPI file '%s' cannot be found, therefore\nyou can currently select only image recorders.\n\nPlease check for correct Windows ASPI Manager installation\nof your SCSI Host Adapter Software.
20=The driver '%s' was not recognized. It will be ignored\nand can probably be deleted.
21=Sorry, this Nero version can only be used with the recorder it has been bundled with.\n\nTo receive a full version of Nero, please contact sales@nero.com\nor visit our web site https://www.nero.com/eng/
22=Sorry, this Nero version supports %s recorders only.\n\nTo receive a full version of Nero, please contact sales@nero.com\nor visit our web site https://www.nero.com/eng/
23=The audio file '%s' is invalid (required: 44.1 kHz, 16 bit, stereo).
24=This folder already contains a folder named '%s'
25=This folder already contains a file named '%s'
26=Total files=%d, identical=%d, different=%d, inaccessible=%d, skipped=%d.
27=%s at COM%i
28=The Nero serial number has expired.\nOnly the slowest burning speed will be available.
29=The file format is not supported.
30=Reading disc
31=Writing to cache
32=Testing speed
33=Simulating
34=Writing to disc
35=Verifying disc
36=The file %s, a component of backup restoration program NRESTORE cannot be located.\nPlease make sure that all components are properly installed.
37=The installation path cannot be located!
38=The selected hard drive cannot be locked.\nMaybe it is locked by another application.\nIn this case the backup may fail.\nDo you wish to continue?
39=The file system of selected partition cannot be recognized.\nThis partition cannot be backed up using data compression.
40=The selected partition is formatted with a file system not supported for reorganizing.\nThis partition cannot be backed up using data compression.
41=An error occurred while creating backup items.\nThe operation will be aborted.
42=Due to patent license restrictions, MPEG-2 encoding/converting is not available.\nTo add this feature, please purchase the DVD-Video Plug-in at https://www.nero.com/eng/
43=Simulation not possible for this type of disc. Skipping simulation.
44=Simulation not possible for this type of disc.
45=Can only write at %s instead of %s to current disc.
46=No common write speed for these recorders.
47=File name is not correct or file was not found.
48=The boot image file '%s' could not be found.\nAll backup data will be written to the disc, but the first backup disc will not be bootable.\nDo you wish to continue?
49=Sorry, this kind of compilation cannot be written on the selected recorder(s). Please select a different recorder or modify the settings of your compilation.
50=Unfortunately your multisession disc is now full. The remaining\nfree space of %d MB on this disc is insufficient to write your\ndata of %d MB.\nTherefore this multisession backup cannot be\ncontinued.\n\nPlease start a new multisession backup on a blank disc.
51=Simulation not allowed with DRM-protected files!
52=Speed test not allowed with DRM-protected files!
53=Danish
54=Dutch
55=English (United Kingdom)
56=English (United States)
57=Finnish
58=French (Belgium)
59=French (Canada)
60=French (France)
61=French (Switzerland)
62=German (Germany)
63=German (Switzerland)
64=Hungarian
65=Italian
66=Norwegian
67=Portuguese
68=Russian
69=Spanish (Latin America)
70=Spanish (Spain)
71=Swedish
72=Turkish
73=Writing data files
74=Finalizing disc
75=Error writing file %s
76=Error reading file %s
77=Preparation of item '%s' failed.
78=A backup with the same name already exists at the selected position.\nDo you really want to overwrite it?
79=You are burning a disc with UDF version 2.50 or higher.\nWindows XP and earlier versions will not be able to mount this disc.
80=You have inserted a disc (DVD+RW, DVD-RAM, HD DVD-RAM, or BD-RE)\nwhich is not compatible with UDF virtual partition.\nThe result may not be readable.\nOnly CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, HD DVD-R, HD DVD-RW, and BD-R\nare compatible with UDF virtual partition.
81=Can only write at %dx instead of %dx,\nbecause speed of source data is too slow
82=empty
83=%s activated
[NEROAPIWAITCDTEXTS]
0=Please insert the disc to write to...
1=Please insert a disc to use during simulation...\n\n(Nothing will be written on the disc.)
2=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. The disc will be reloaded automatically before continuing with burning...
3=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. Please reinsert the disc...
4=Please remove the disc and insert the next recordable disc to write to...
5=Please insert the original disc.
6=This disc is not writable.\n\nPlease insert a writable disc...
7=There is not enough space to burn this compilation to this disc.\n\nPlease insert another disc that has enough space...
8=The disc is blank, invalid\nor a multisession disc.\n\nPlease insert original disc...
9=The disc is not empty.\n\nPlease insert an empty disc.
10=Please insert an empty disc to write to...
11=Please insert an empty disc to use during simulation...\n\n(Nothing will be written on the disc.)
12=The disc is blank.\n\nPlease insert original disc...
13=Checking for the disc, please wait...\n\nTo burn this multisession compilation you need the disc containing the previous backup sessions. Please insert this disc if you have not already done so.
14=To simulate this multisession compilation you need the disc containing the previous backup sessions. Please insert this disc. (Nothing will be written on disc.)
15=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. Please reinsert the\nsame multisession disc...
16=Disc analysis failed. The error log\ncontains more information about the reason why it failed.
17=The recorder does not support this type of disc!\n\nPlease insert a correct disc to write to...
18=Please do not remove the disc!\n\nYour recorder requires that the disc be ejected between burning and verification. The disc will be reloaded automatically when burning is to continue...
19=Please do not remove the disc!\n\nYour recorder requires the disc to be ejected between burning and verification. Please reinsert the disc...
20=The disc is not formatted. Please insert a formatted disc.
21=Sorry, your compilation cannot be written on this kind of disc. Please insert a disc of the correct type or modify the settings of your compilation to make them compatible with the current disc.
22=--- Accessing disc, please wait ---
23=The disc is not empty.
24=There is not enough space to burn the compilation onto this disc.
25=There is not enough space to burn the compilation onto this disc.\n\nPlease insert an 80 min/700 MB disc.
26=Can write multisession or unfinalized DVD-R DL in UDF format only.
27=Can write multisession or unfinalized DVD-R DL on recorders with Layer Jump Recording support only.
28=The UDF parameters contain illegal values.
29=UDF Multisession on multiple recorders is not supported.
30=Sparable partition type not supported in case multisession is used.
31=You are trying to burn a disc with a virtual or sparable UDF partition using UDF version 1.02.\nThis is not possible. Please use UDF version 1.50 or above.
32=You are trying to burn a BD-R multisession disc with an UDF version below 2.60.\nThis is not possible. Please use UDF version 2.60 instead.
Ajout: le service COM est bien disponible sur Xp, plus sur Vista. J'ai beau retourner mon Services dans tous les sens, rien ne parle du graveur.
Ce qui me semble vraiment bizarre, c'est que ça marche sur toutes les configs, sauf sur la mienne. La Shcoumounne? ;)
Ce qui me semble vraiment bizarre, c'est que ça marche sur toutes les configs, sauf sur la mienne. La Shcoumounne? ;)
controle ça;
http://www.faq-nero.com/faq007.php
bien que je n'ai jamais entendu parle d'ecran bleu!!!
le log est dans nero history et non dans nero tout court,reprends le tuto plus haut!
(et n'oublie pas d efface ton numero de serie,qui est sur chaque log)
http://www.faq-nero.com/faq007.php
bien que je n'ai jamais entendu parle d'ecran bleu!!!
le log est dans nero history et non dans nero tout court,reprends le tuto plus haut!
(et n'oublie pas d efface ton numero de serie,qui est sur chaque log)
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Re-salut SV,
Désolé, je n'ai pas de fichier Log, où que ce soit dans le dossier Nero7. Par contre, l'extrait de fichier que j'ai envoyé, c'est Nero.txt dans Core, et à mon avis il s'agit du descriptif des erreurs. Désolé pour la confusion :s
Là je viens d'installer la verion 7.10, avec laquelle j'ai d'abord fait un essai de gravure de Lightscibe, qui a fonctionné (donc Nero reconnait le graveur, et est compatible avec celui-ci). J'avoue que je j'ai pas encore eu le temps de refaire un essai de gravure de données, que ce soit sur CD ou DVD, mais à mon avis, si sur la verion 7.9.6.0 ça a déjà planté, je ne vois pas pourquoi ça ne planterait pas en 7.10. Mais qui sait? L'essai sera fait demain, même si j'en ai marre de gâcher des DVD pour rien (je vais tester la simulation la prochaine fois, quitte à ce que ça plante, autant que mon DVD reste vierge!)
Quand je parle d'écran bleu, c'est le fameux "blue screen" qui dit qu'une erreur fatale est survenue, et qui ne dure jamais assez longtemps pour qu'on ait le temps de prendre note...
Merci encore pour le coup de main
Pat
Désolé, je n'ai pas de fichier Log, où que ce soit dans le dossier Nero7. Par contre, l'extrait de fichier que j'ai envoyé, c'est Nero.txt dans Core, et à mon avis il s'agit du descriptif des erreurs. Désolé pour la confusion :s
Là je viens d'installer la verion 7.10, avec laquelle j'ai d'abord fait un essai de gravure de Lightscibe, qui a fonctionné (donc Nero reconnait le graveur, et est compatible avec celui-ci). J'avoue que je j'ai pas encore eu le temps de refaire un essai de gravure de données, que ce soit sur CD ou DVD, mais à mon avis, si sur la verion 7.9.6.0 ça a déjà planté, je ne vois pas pourquoi ça ne planterait pas en 7.10. Mais qui sait? L'essai sera fait demain, même si j'en ai marre de gâcher des DVD pour rien (je vais tester la simulation la prochaine fois, quitte à ce que ça plante, autant que mon DVD reste vierge!)
Quand je parle d'écran bleu, c'est le fameux "blue screen" qui dit qu'une erreur fatale est survenue, et qui ne dure jamais assez longtemps pour qu'on ait le temps de prendre note...
Merci encore pour le coup de main
Pat
salut,nero7/core/nero history ,tu n'as pas ce fichier?
il y a beaucoup d'erreur,mais il y en a une en particulier!
dans nero,ouvre nero info tool(extra/obtenir des infos sur le systeme)
regarde si les aspis sont installe,sinon tu peux les telecharger ici;
https://www.nero.com/eng/index.php
nero possede ses propres aspi!!!
definition ici;
https://fr.wikipedia.org/wiki/ASPI
sur les erreurs,on peu voir qu'ils ne sont pas reconnu.
si en effet ils sont bien la,alors c'est le graveur qui est bon pour le sav si sous garantie,sinon il faut investir!
il y a beaucoup d'erreur,mais il y en a une en particulier!
dans nero,ouvre nero info tool(extra/obtenir des infos sur le systeme)
regarde si les aspis sont installe,sinon tu peux les telecharger ici;
https://www.nero.com/eng/index.php
nero possede ses propres aspi!!!
definition ici;
https://fr.wikipedia.org/wiki/ASPI
sur les erreurs,on peu voir qu'ils ne sont pas reconnu.
si en effet ils sont bien la,alors c'est le graveur qui est bon pour le sav si sous garantie,sinon il faut investir!
Merci encore SV,
Bon, tu vas dirte que je suis contrariant... Après l'historuque qui n'existe pas (fait la recherche, rien pour Nero), je n'ai pas non plus de info tool dans extra dans Nero... J'ai "Encodage des fichiers...", "enregistrer les pistes..." et "Afficher la piste...", c'est tout.
Du coup, pas moyen de savoir quelles ASPI sont installées... Sur le lien que tu donnes, d'ailleurs, ça va jusque XP, pas un mot sur Vista, à croire que les ASPI ne sont plus utilisées sur Vista.
Par contre, j'ai trouvé dans le Top20 des FAQ, la question 15: "Pourquoi les lecteurs CD/DVD disparaissent de l'Explorateur Windows après avoir installé Nero 7 ?", et là, un lien vers un zip contenant des outils que je considère comme étant des "réinitialisations" du graveur, et un réparateur de registre. Après redémarrage... Oh miracle!!!!!!! Je peux graver un DVD complet, yesssssss!!!!!!!!!
Donc, merci à toi, SV, de m'avoir mis sur la voie. Je ne clôture pas la question tout de suite, le temps de voir si c'est juste un coup de chance (pas encore eu le temps d'essayer plus d'un DVD pour le moment) ou une vraie "guérison".
Qui sait, ça peut aider d'autres personnes qui sont dans le cas?
Bon, tu vas dirte que je suis contrariant... Après l'historuque qui n'existe pas (fait la recherche, rien pour Nero), je n'ai pas non plus de info tool dans extra dans Nero... J'ai "Encodage des fichiers...", "enregistrer les pistes..." et "Afficher la piste...", c'est tout.
Du coup, pas moyen de savoir quelles ASPI sont installées... Sur le lien que tu donnes, d'ailleurs, ça va jusque XP, pas un mot sur Vista, à croire que les ASPI ne sont plus utilisées sur Vista.
Par contre, j'ai trouvé dans le Top20 des FAQ, la question 15: "Pourquoi les lecteurs CD/DVD disparaissent de l'Explorateur Windows après avoir installé Nero 7 ?", et là, un lien vers un zip contenant des outils que je considère comme étant des "réinitialisations" du graveur, et un réparateur de registre. Après redémarrage... Oh miracle!!!!!!! Je peux graver un DVD complet, yesssssss!!!!!!!!!
Donc, merci à toi, SV, de m'avoir mis sur la voie. Je ne clôture pas la question tout de suite, le temps de voir si c'est juste un coup de chance (pas encore eu le temps d'essayer plus d'un DVD pour le moment) ou une vraie "guérison".
Qui sait, ça peut aider d'autres personnes qui sont dans le cas?
ok,c'est cool pour toi,mais si tupeux mettre le lien vers le zip,ce serait cool pour ceux qui aurait le meme pb que toi.
A+
A+
Oui, bien sûr.
Il s'agit de la page FAQ de Nero, question 15: " Pourquoi les lecteurs CD/DVD disparaissent de l'Explorateur Windows après avoir installé Nero 7 ?" ( https://www.nero.com/eng/index.php#15 ), et voici le lien direct pour télécharger le package ZIP: ftp://ftp9.nero.com/attach/cleanpack.zip (le lien télécharge directement, voilà pourquoi j'ai mis le lien de la page sur laquelle se trouve cette demande de download).
Merci encore
Pat
Il s'agit de la page FAQ de Nero, question 15: " Pourquoi les lecteurs CD/DVD disparaissent de l'Explorateur Windows après avoir installé Nero 7 ?" ( https://www.nero.com/eng/index.php#15 ), et voici le lien direct pour télécharger le package ZIP: ftp://ftp9.nero.com/attach/cleanpack.zip (le lien télécharge directement, voilà pourquoi j'ai mis le lien de la page sur laquelle se trouve cette demande de download).
Merci encore
Pat
