Scanner avec imprimante HP PSC 1110 SERIE
Résolu/Fermé
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
-
9 nov. 2009 à 17:56
bob031 Messages postés 8158 Date d'inscription samedi 7 août 2004 Statut Membre Dernière intervention 1 septembre 2014 - 24 nov. 2009 à 12:19
bob031 Messages postés 8158 Date d'inscription samedi 7 août 2004 Statut Membre Dernière intervention 1 septembre 2014 - 24 nov. 2009 à 12:19
A voir également:
- Scanner avec imprimante HP PSC 1110 SERIE
- Comment scanner un document avec une imprimante - Guide
- Pilote imprimante hp - Télécharger - Pilotes & Matériel
- Telecharger scanner - Télécharger - Divers Utilitaires
- Scanner avec samsung - Guide
- Hp format tool - Télécharger - Stockage
31 réponses
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
9 nov. 2009 à 18:42
9 nov. 2009 à 18:42
Bonjour,
As-tu essayé de lancer la commande xsane en root ?
As-tu essayé de lancer la commande xsane en root ?
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
9 nov. 2009 à 20:03
9 nov. 2009 à 20:03
J'ai un message d'erreur "Erreur d'ouverture du périphérique 'v4|:/dev/video0': Argument invalide."
:-/
:-/
jipicy
Messages postés
40842
Date d'inscription
jeudi 28 août 2003
Statut
Modérateur
Dernière intervention
10 août 2020
4 894
9 nov. 2009 à 20:35
9 nov. 2009 à 20:35
Ouvre une console et tape :
sane-find-scanner -v et ensuite : scanimage -L
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
9 nov. 2009 à 21:44
9 nov. 2009 à 21:44
Voici ce que ça donne :
[fabrice@localhost ~]$ sane-find-scanner -v
This is sane-find-scanner from sane-backends 1.0.19
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc 1100 series]) at libusb:003:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
done
[fabrice@localhost ~]$ scanimage -L
device `v4l:/dev/video0' is a Noname Acer CrystalEye webcam virtual device
[fabrice@localhost ~]$ sane-find-scanner -v
This is sane-find-scanner from sane-backends 1.0.19
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc 1100 series]) at libusb:003:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
done
[fabrice@localhost ~]$ scanimage -L
device `v4l:/dev/video0' is a Noname Acer CrystalEye webcam virtual device
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
jipicy
Messages postés
40842
Date d'inscription
jeudi 28 août 2003
Statut
Modérateur
Dernière intervention
10 août 2020
4 894
9 nov. 2009 à 22:17
9 nov. 2009 à 22:17
# You may want to run this program as root to find all devices
Relances scanimage -L en tant que "root".
Relances scanimage -L en tant que "root".
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
10 nov. 2009 à 18:48
10 nov. 2009 à 18:48
Toujours pareil...
[fabrice@localhost ~]$ su -
Password:
[root@localhost ~]# scanimage -L
device `v4l:/dev/video0' is a Noname Acer CrystalEye webcam virtual device
[fabrice@localhost ~]$ su -
Password:
[root@localhost ~]# scanimage -L
device `v4l:/dev/video0' is a Noname Acer CrystalEye webcam virtual device
jipicy
Messages postés
40842
Date d'inscription
jeudi 28 août 2003
Statut
Modérateur
Dernière intervention
10 août 2020
4 894
10 nov. 2009 à 18:55
10 nov. 2009 à 18:55
Ça sent mauvais ;-(((
Désolé ;(
Désolé ;(
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
10 nov. 2009 à 19:05
10 nov. 2009 à 19:05
pourtant :
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc 1100 series]) at libusb:003:002
as-tu une webcam ? d'après ceci :
device `v4l:/dev/video0' is a Noname Acer CrystalEye webcam virtual device
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x3011 [psc 1100 series]) at libusb:003:002
as-tu une webcam ? d'après ceci :
device `v4l:/dev/video0' is a Noname Acer CrystalEye webcam virtual device
jipicy
Messages postés
40842
Date d'inscription
jeudi 28 août 2003
Statut
Modérateur
Dernière intervention
10 août 2020
4 894
10 nov. 2009 à 19:09
10 nov. 2009 à 19:09
Re-
C'est bien pour ça que j'avais demandé la commande en root (# You may want to run this program as root to find all devices), mais même malgré ça, il n'est pas vu ;-((
C'est bien pour ça que j'avais demandé la commande en root (# You may want to run this program as root to find all devices), mais même malgré ça, il n'est pas vu ;-((
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
10 nov. 2009 à 19:49
10 nov. 2009 à 19:49
Donc je suppose que c'est mort :-/ ...
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
10 nov. 2009 à 19:52
10 nov. 2009 à 19:52
peux-tu répondre à la question suivante, stp :
as-tu une webcam, ou je ne sais quoi, de connecter et qui passerait pour une "webcam virtuelle" ?
merci.
as-tu une webcam, ou je ne sais quoi, de connecter et qui passerait pour une "webcam virtuelle" ?
merci.
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
10 nov. 2009 à 20:44
10 nov. 2009 à 20:44
Ah pardon, je ne l'avais pas vu... :-))
Oui, j'ai une webcam intégrée...
Oui, j'ai une webcam intégrée...
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
11 nov. 2009 à 19:19
11 nov. 2009 à 19:19
le résultat de cette commande stp :
ls -l /etc/udev/rules.d/
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
11 nov. 2009 à 21:00
11 nov. 2009 à 21:00
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
12 nov. 2009 à 19:56
12 nov. 2009 à 19:56
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
12 nov. 2009 à 21:23
12 nov. 2009 à 21:23
Voici le résultat de la commande :
[fabrice@localhost ~]$ su -
Password:
[root@localhost ~]# ls -l /etc/udev/rules.d/
total 212
-rw-r--r-- 1 root root 36 2009-04-24 17:19 00-hcfpci.rules
-rw-r--r-- 1 root root 36 2009-11-07 16:54 00-hsf.rules
-rw-r--r-- 1 root root 83 2009-04-14 21:07 20-madwifi.rules
-rw-r--r-- 1 root root 99 2009-04-11 10:41 40-prism2.rules
-rw-r--r-- 1 root root 6623 2009-04-21 17:32 41-wacom.rules
-rw-r--r-- 1 root root 792 2009-02-04 18:26 49_hso-udev.rules
-rw-r--r-- 1 root root 100 2009-07-20 00:02 60-bluetooth.rules
-rw-r--r-- 1 root root 348 2009-03-25 17:11 60-dynamic.rules
-rw-r--r-- 1 root root 41614 2009-03-17 11:33 60-libmtp.rules
-rw-r--r-- 1 root root 1060 2009-03-07 19:35 60-pcmcia.rules
-rw-r--r-- 1 root root 452 2009-03-17 01:32 60-raw.rules
-rw-r--r-- 1 root root 96803 2008-08-29 19:12 70-libsane.rules
-rw-r--r-- 1 root root 350 2009-10-01 12:41 70-mdadm.rules
-rw-r--r-- 1 root root 1737 2009-11-07 16:19 70-persistent-cd.rules
-rw-r--r-- 1 root root 761 2009-11-07 16:19 70-persistent-net.rules
-rw-r--r-- 1 root root 53 2009-04-22 09:43 91-drm-modeset.rules
-rw-r--r-- 1 root root 2283 2009-07-20 00:02 97-bluetooth-serial.rules
-rw-r--r-- 1 root root 92 2009-04-07 13:30 alsa.rules
[fabrice@localhost ~]$ su -
Password:
[root@localhost ~]# ls -l /etc/udev/rules.d/
total 212
-rw-r--r-- 1 root root 36 2009-04-24 17:19 00-hcfpci.rules
-rw-r--r-- 1 root root 36 2009-11-07 16:54 00-hsf.rules
-rw-r--r-- 1 root root 83 2009-04-14 21:07 20-madwifi.rules
-rw-r--r-- 1 root root 99 2009-04-11 10:41 40-prism2.rules
-rw-r--r-- 1 root root 6623 2009-04-21 17:32 41-wacom.rules
-rw-r--r-- 1 root root 792 2009-02-04 18:26 49_hso-udev.rules
-rw-r--r-- 1 root root 100 2009-07-20 00:02 60-bluetooth.rules
-rw-r--r-- 1 root root 348 2009-03-25 17:11 60-dynamic.rules
-rw-r--r-- 1 root root 41614 2009-03-17 11:33 60-libmtp.rules
-rw-r--r-- 1 root root 1060 2009-03-07 19:35 60-pcmcia.rules
-rw-r--r-- 1 root root 452 2009-03-17 01:32 60-raw.rules
-rw-r--r-- 1 root root 96803 2008-08-29 19:12 70-libsane.rules
-rw-r--r-- 1 root root 350 2009-10-01 12:41 70-mdadm.rules
-rw-r--r-- 1 root root 1737 2009-11-07 16:19 70-persistent-cd.rules
-rw-r--r-- 1 root root 761 2009-11-07 16:19 70-persistent-net.rules
-rw-r--r-- 1 root root 53 2009-04-22 09:43 91-drm-modeset.rules
-rw-r--r-- 1 root root 2283 2009-07-20 00:02 97-bluetooth-serial.rules
-rw-r--r-- 1 root root 92 2009-04-07 13:30 alsa.rules
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
13 nov. 2009 à 18:12
13 nov. 2009 à 18:12
rw-r--r-- 1 root root 96803 2008-08-29 19:12 70-libsane.rules
maintenant, peux-tu afficher le fichier 70-libsane.rules :
cat /etc/udev/rules.d/70-libsane.rules
+ le résultat pour les 2 utilisateurs (l'utilisateur "normal" et root) de la commande
id
merci.
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
17 nov. 2009 à 20:36
17 nov. 2009 à 20:36
Je t'envoies les résultats en message privé, ça mouline et ça ne marche pas si je te les mets ici.
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
18 nov. 2009 à 17:20
18 nov. 2009 à 17:20
ton utilisateur "normal" et root devrait être dans le groupe saned ...
> redfox@mandriva[192.168.1.2]:~$ cat /etc/group | grep saned usb:x:43:saned,redfox cdwriter:x:80:saned,redfox saned:x:77:redfox > redfox@mandriva[192.168.1.2]:~$
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
18 nov. 2009 à 20:07
18 nov. 2009 à 20:07
Ce sont des manips que je dois faire ?
Si oui, en normal ou en root ? ou les deux ?
Si oui, en normal ou en root ? ou les deux ?
bob031
Messages postés
8158
Date d'inscription
samedi 7 août 2004
Statut
Membre
Dernière intervention
1 septembre 2014
472
18 nov. 2009 à 20:11
18 nov. 2009 à 20:11
non pas de manips à faire, juste aller dans le menu démarrer et tu trouveras quelque chose dans le genre Utilisateurs et Groupes ....
... là tu devrais pouvoir ajouter root et fabrice au groupe saned
... là tu devrais pouvoir ajouter root et fabrice au groupe saned
Tael
Messages postés
427
Date d'inscription
samedi 27 octobre 2007
Statut
Membre
Dernière intervention
15 décembre 2014
31
18 nov. 2009 à 20:39
18 nov. 2009 à 20:39
Je suis aller dans "configurer ordinateur" / "système" / "gérer les utilisateurs du système".
La ligne "fabrice" apparaît. J'ai donc cliqué droit et choisi "Editer" et dans groupe je ne trouve pas saned...
La ligne "fabrice" apparaît. J'ai donc cliqué droit et choisi "Editer" et dans groupe je ne trouve pas saned...