Problème barrettes mémoire. Aidez-moi svp
Résolu/Fermé
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
-
21 nov. 2008 à 09:45
Jimmon Messages postés 106 Date d'inscription mercredi 9 avril 2008 Statut Membre Dernière intervention 7 février 2010 - 22 nov. 2008 à 01:07
Jimmon Messages postés 106 Date d'inscription mercredi 9 avril 2008 Statut Membre Dernière intervention 7 février 2010 - 22 nov. 2008 à 01:07
A voir également:
- Problème barrettes mémoire. Aidez-moi svp
- Mémoire virtuelle - Guide
- Nettoyer mémoire ipad - Guide
- Test memoire pc - Guide
- Exemple de thème de mémoire en secrétariat - Forum Mail
- L'état de la memoire ne peut pas etre read - Astuces et Solutions
46 réponses
dje06
Messages postés
286
Date d'inscription
mercredi 16 avril 2008
Statut
Membre
Dernière intervention
15 octobre 2009
23
21 nov. 2008 à 09:47
21 nov. 2008 à 09:47
Salut,
tu as tenter de changer de slot ou pas?
tu as tenter de changer de slot ou pas?
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 09:49
21 nov. 2008 à 09:49
Il faut que tu regarde si ta carte mére est compatible avec des barettes de 800mhz, car les anciennes c'était des 533Mhz.
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:11
21 nov. 2008 à 10:11
Désolé mais je suis un peu nul. C'est pour ça que j'étais venu poster ici. On m'avait dit que ça allait. J'ai enlevé mes 2 barrettes et ai mis les 2 barrettes corsair à la place. Merci de m'aider et d'avoir répondu si vite.
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 10:16
21 nov. 2008 à 10:16
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:19
21 nov. 2008 à 10:19
Je pense en effet que c'est celle-ci mais comment en être certain? J'ai bien noté plus haut ce que j'ai trouvé avec everest.
Merci de votre aide
Merci de votre aide
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:24
21 nov. 2008 à 10:24
J'ai trouvé ceci : http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=260n%27est donc je ne comprends pas pourquoi mes" corsair" ne marche pas? Et comme je n'y connais rien je suis en panique. Merci en tout ca de vous intéresser à mon cas
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 10:26
21 nov. 2008 à 10:26
Normalement, sa devrait passer, mais pourquoi tu a prix de la ram haut de gamme sur un processeur pas trés puissant? Pour l'overcklocker?
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 10:29
21 nov. 2008 à 10:29
Télécharge CPU-z. Sa donne des info sur la ram que tu peut-mettre. (Personnellement, je pense que c'est que les timing qui sont trop bas et la tension de la ram trop haute)
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:29
21 nov. 2008 à 10:29
Je ne sais pas , sur les conseils des autres. Et j'ai essayé de les mettre plusieurs fois. A chaque fois ça bip et je ne peux rien faire. En remettant mes 512 Kingmax c'est OK. Que puis-je faire. Y a t'il d'autre manip à faire?
Merci
Merci
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 10:31
21 nov. 2008 à 10:31
Télécharge CPU-z.
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:33
21 nov. 2008 à 10:33
et maintenant que dois-je faire, j'ai cpuz
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 10:35
21 nov. 2008 à 10:35
Recopie les information, qu'il y a marquer.
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:38
21 nov. 2008 à 10:38
Suis vraiment nul. Comment faire une copie de tout ça ? Merci de ton aide "Grand pilote"
[UST]Akonv!ct
Messages postés
86
Date d'inscription
vendredi 21 novembre 2008
Statut
Membre
Dernière intervention
23 novembre 2008
2
21 nov. 2008 à 10:38
21 nov. 2008 à 10:38
oui telechrge CPU-z ! pi tu lance et tu verra si quil te faut comme DDR2 ou DDR3
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 10:39
21 nov. 2008 à 10:39
Au clavier.
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:39
21 nov. 2008 à 10:39
OK suis vraiment nul moi!!
-------------------------
CPU-Z version 1.48
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 1
Processor 0
-- Core 0
-- Thread 0
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name AMD Sempron 3200+
Codename Manila
Specification AMD Sempron(tm) Processor 3200+
Package Socket AM2 (940)
CPUID F.F.2
Extended CPUID F.4F
Brand ID 6
Core Stepping DH-F2
Technology 90 nm
Core Speed 1800.1 MHz (9.0 x 200.0 MHz)
HT Link speed 800.0 MHz
Stock frequency 1800 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 128 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 9.0x
max VID 1.450 V
Features XD
K8 Thermal sensor yes
K8 Revision ID 5.2
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Thread dumps
------------------------------------------------------------------------------------
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 02002006h
Max CPUID level 00000001h
Max CPUID ext. level 80000018h
Function eax ebx ecx edx
0x00000000 0x00000001 0x68747541 0x444D4163 0x69746E65
0x00000001 0x00040FF2 0x00000800 0x00002001 0x078BFBFF
0x80000000 0x80000018 0x68747541 0x444D4163 0x69746E65
0x80000001 0x00040FF2 0x00000D11 0x00000019 0xEBD3FBFF
0x80000002 0x20444D41 0x706D6553 0x286E6F72 0x20296D74
0x80000003 0x636F7250 0x6F737365 0x32332072 0x002B3030
0x80000004 0x00000000 0x00000000 0x00000000 0x00000000
0x80000005 0xFF08FF08 0xFF20FF20 0x40020140 0x40020140
0x80000006 0x00000000 0x42004200 0x00808140 0x00000000
0x80000007 0x00000000 0x00000000 0x00000000 0x0000003F
0x80000008 0x00003028 0x00000000 0x00000000 0x00000000
0x80000009 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000A 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000B 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000C 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000D 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000E 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000F 0x00000000 0x00000000 0x00000000 0x00000000
0x80000010 0x00000000 0x00000000 0x00000000 0x00000000
0x80000011 0x00000000 0x00000000 0x00000000 0x00000000
0x80000012 0x00000000 0x00000000 0x00000000 0x00000000
0x80000013 0x00000000 0x00000000 0x00000000 0x00000000
0x80000014 0x00000000 0x00000000 0x00000000 0x00000000
0x80000015 0x00000000 0x00000000 0x00000000 0x00000000
0x80000016 0x00000000 0x00000000 0x00000000 0x00000000
0x80000017 0x00000000 0x00000000 0x00000000 0x00000000
0x80000018 0x00000000 0x00000000 0x00000000 0x00000000
Cache descriptor Level 1 I 64 KB 1 thread(s)
Cache descriptor Level 1 D 64 KB 1 thread(s)
Cache descriptor Level 2 U 128 KB 1 thread(s)
MSR 0x0000001B edx = 0x00000000 eax = 0xFEE00900
MSR 0xC001001E edx = 0x00000000 eax = 0x00000052
MSR 0xC0010015 edx = 0x00000000 eax = 0x02000001
MSR 0xC0010042 edx = 0x31041206 eax = 0x040A020A
MSR 0xC0010041 edx = 0x00000001 eax = 0x0000060A
Chipset
------------------------------------------------------------------------------
Northbridge VIA K8M890CE rev. 00
Southbridge VIA VT8237A rev. 00
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR2
Memory Size 1024 MBytes
Channels Dual
Memory Frequency 257.2 MHz (CPU/7)
CAS# 4.0
RAS# to CAS# 5
RAS# Precharge 4
Cycle Time (tRAS) 12
Bank Cycle Time (tRC) 17
Command Rate 2T
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingmax Semiconductor (7F7F7F2500000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number KLBC28F-A8KB4
Attributes
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 200 266 266
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 4
RAS# Precharge 3 4 4
TRAS 9 12 12
TRC 12 16 16
DIMM #2
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingmax Semiconductor (7F7F7F2500000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number KLBC28F-A8KB4
DMI
------------------------------------------------------------------------------
DMI BIOS
--------
vendor Phoenix Technologies, LTD
version 6.00 PG
date 07/03/2006
DMI System Information
----------------------
manufacturer MICRO-STAR INTERNATIONAL CO., LTD
product MS-7253
version 1.00
serial unknown
UUID FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
DMI Baseboard
-------------
vendor MICRO-STAR INTERNATIONAL CO., LTD
model MS-7253
revision 1.00
serial unknown
DMI System Enclosure
--------------------
manufacturer unknown
chassis type Desktop
chassis serial unknown
DMI Processor
-------------
manufacturer AMD
model AMD Sempron(tm) Processor 3200+
clock speed 1800.0 MHz
FSB speed 200.0 MHz
multiplier 9.0x
DMI Memory Controller
---------------------
correction 64-bit ECC
Max module size 4096 MBytes
DMI Memory Module
-----------------
designation A0
size 512 MBytes (single bank)
DMI Memory Module
-----------------
designation A1
size 512 MBytes (single bank)
DMI Port Connector
------------------
designation PRIMARY IDE (internal)
connector On Board IDE
DMI Port Connector
------------------
designation SECONDARY IDE (internal)
connector On Board IDE
DMI Port Connector
------------------
designation FDD (internal)
port type 8251 FIFO Compatible
connector On Board Floppy
DMI Port Connector
------------------
designation COM1 (internal)
port type Serial Port 16450
connector 9 Pin Dual Inline (pin 10 cut)
connector DB-9 male
DMI Port Connector
------------------
designation COM2 (internal)
port type Serial Port 16450
connector 9 Pin Dual Inline (pin 10 cut)
connector DB-9 male
DMI Port Connector
------------------
designation LPT1 (internal)
port type Parallel Port ECP/EPP
connector DB-25 female
connector DB-25 female
DMI Port Connector
------------------
designation Keyboard (internal)
port type Keyboard Port
connector PS/2
connector PS/2
DMI Port Connector
------------------
designation PS/2 Mouse (internal)
port type Mouse Port
connector PS/2
connector PS/2
DMI Port Connector
------------------
designation USB0 (external)
port type USB
DMI Extension Slot
------------------
designation PCI0
type PCI
width 32 bits
populated no
DMI Extension Slot
------------------
designation PCI1
type PCI
width 32 bits
populated no
DMI Extension Slot
------------------
designation PCI2
type A5
width 32 bits
populated no
DMI Extension Slot
------------------
designation PCI3
type PCI
width 32 bits
populated no
DMI Extension Slot
------------------
designation AGP
type AGP
width 32 bits
populated no
DMI Physical Memory Array
-------------------------
location Motherboard
usage System Memory
correction None
max capacity 8192 MBytes
<b
-------------------------
CPU-Z version 1.48
-------------------------
Processors Map
------------------------------------------------------------------------------------
Number of processors 1
Number of threads 1
Processor 0
-- Core 0
-- Thread 0
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name AMD Sempron 3200+
Codename Manila
Specification AMD Sempron(tm) Processor 3200+
Package Socket AM2 (940)
CPUID F.F.2
Extended CPUID F.4F
Brand ID 6
Core Stepping DH-F2
Technology 90 nm
Core Speed 1800.1 MHz (9.0 x 200.0 MHz)
HT Link speed 800.0 MHz
Stock frequency 1800 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 128 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 9.0x
max VID 1.450 V
Features XD
K8 Thermal sensor yes
K8 Revision ID 5.2
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Thread dumps
------------------------------------------------------------------------------------
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 02002006h
Max CPUID level 00000001h
Max CPUID ext. level 80000018h
Function eax ebx ecx edx
0x00000000 0x00000001 0x68747541 0x444D4163 0x69746E65
0x00000001 0x00040FF2 0x00000800 0x00002001 0x078BFBFF
0x80000000 0x80000018 0x68747541 0x444D4163 0x69746E65
0x80000001 0x00040FF2 0x00000D11 0x00000019 0xEBD3FBFF
0x80000002 0x20444D41 0x706D6553 0x286E6F72 0x20296D74
0x80000003 0x636F7250 0x6F737365 0x32332072 0x002B3030
0x80000004 0x00000000 0x00000000 0x00000000 0x00000000
0x80000005 0xFF08FF08 0xFF20FF20 0x40020140 0x40020140
0x80000006 0x00000000 0x42004200 0x00808140 0x00000000
0x80000007 0x00000000 0x00000000 0x00000000 0x0000003F
0x80000008 0x00003028 0x00000000 0x00000000 0x00000000
0x80000009 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000A 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000B 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000C 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000D 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000E 0x00000000 0x00000000 0x00000000 0x00000000
0x8000000F 0x00000000 0x00000000 0x00000000 0x00000000
0x80000010 0x00000000 0x00000000 0x00000000 0x00000000
0x80000011 0x00000000 0x00000000 0x00000000 0x00000000
0x80000012 0x00000000 0x00000000 0x00000000 0x00000000
0x80000013 0x00000000 0x00000000 0x00000000 0x00000000
0x80000014 0x00000000 0x00000000 0x00000000 0x00000000
0x80000015 0x00000000 0x00000000 0x00000000 0x00000000
0x80000016 0x00000000 0x00000000 0x00000000 0x00000000
0x80000017 0x00000000 0x00000000 0x00000000 0x00000000
0x80000018 0x00000000 0x00000000 0x00000000 0x00000000
Cache descriptor Level 1 I 64 KB 1 thread(s)
Cache descriptor Level 1 D 64 KB 1 thread(s)
Cache descriptor Level 2 U 128 KB 1 thread(s)
MSR 0x0000001B edx = 0x00000000 eax = 0xFEE00900
MSR 0xC001001E edx = 0x00000000 eax = 0x00000052
MSR 0xC0010015 edx = 0x00000000 eax = 0x02000001
MSR 0xC0010042 edx = 0x31041206 eax = 0x040A020A
MSR 0xC0010041 edx = 0x00000001 eax = 0x0000060A
Chipset
------------------------------------------------------------------------------
Northbridge VIA K8M890CE rev. 00
Southbridge VIA VT8237A rev. 00
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR2
Memory Size 1024 MBytes
Channels Dual
Memory Frequency 257.2 MHz (CPU/7)
CAS# 4.0
RAS# to CAS# 5
RAS# Precharge 4
Cycle Time (tRAS) 12
Bank Cycle Time (tRC) 17
Command Rate 2T
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingmax Semiconductor (7F7F7F2500000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number KLBC28F-A8KB4
Attributes
Number of banks 1
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 200 266 266
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 4
RAS# Precharge 3 4 4
TRAS 9 12 12
TRC 12 16 16
DIMM #2
General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingmax Semiconductor (7F7F7F2500000000)
Size 512 MBytes
Max bandwidth PC2-4300 (266 MHz)
Part number KLBC28F-A8KB4
DMI
------------------------------------------------------------------------------
DMI BIOS
--------
vendor Phoenix Technologies, LTD
version 6.00 PG
date 07/03/2006
DMI System Information
----------------------
manufacturer MICRO-STAR INTERNATIONAL CO., LTD
product MS-7253
version 1.00
serial unknown
UUID FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF
DMI Baseboard
-------------
vendor MICRO-STAR INTERNATIONAL CO., LTD
model MS-7253
revision 1.00
serial unknown
DMI System Enclosure
--------------------
manufacturer unknown
chassis type Desktop
chassis serial unknown
DMI Processor
-------------
manufacturer AMD
model AMD Sempron(tm) Processor 3200+
clock speed 1800.0 MHz
FSB speed 200.0 MHz
multiplier 9.0x
DMI Memory Controller
---------------------
correction 64-bit ECC
Max module size 4096 MBytes
DMI Memory Module
-----------------
designation A0
size 512 MBytes (single bank)
DMI Memory Module
-----------------
designation A1
size 512 MBytes (single bank)
DMI Port Connector
------------------
designation PRIMARY IDE (internal)
connector On Board IDE
DMI Port Connector
------------------
designation SECONDARY IDE (internal)
connector On Board IDE
DMI Port Connector
------------------
designation FDD (internal)
port type 8251 FIFO Compatible
connector On Board Floppy
DMI Port Connector
------------------
designation COM1 (internal)
port type Serial Port 16450
connector 9 Pin Dual Inline (pin 10 cut)
connector DB-9 male
DMI Port Connector
------------------
designation COM2 (internal)
port type Serial Port 16450
connector 9 Pin Dual Inline (pin 10 cut)
connector DB-9 male
DMI Port Connector
------------------
designation LPT1 (internal)
port type Parallel Port ECP/EPP
connector DB-25 female
connector DB-25 female
DMI Port Connector
------------------
designation Keyboard (internal)
port type Keyboard Port
connector PS/2
connector PS/2
DMI Port Connector
------------------
designation PS/2 Mouse (internal)
port type Mouse Port
connector PS/2
connector PS/2
DMI Port Connector
------------------
designation USB0 (external)
port type USB
DMI Extension Slot
------------------
designation PCI0
type PCI
width 32 bits
populated no
DMI Extension Slot
------------------
designation PCI1
type PCI
width 32 bits
populated no
DMI Extension Slot
------------------
designation PCI2
type A5
width 32 bits
populated no
DMI Extension Slot
------------------
designation PCI3
type PCI
width 32 bits
populated no
DMI Extension Slot
------------------
designation AGP
type AGP
width 32 bits
populated no
DMI Physical Memory Array
-------------------------
location Motherboard
usage System Memory
correction None
max capacity 8192 MBytes
<b
[UST]Akonv!ct
Messages postés
86
Date d'inscription
vendredi 21 novembre 2008
Statut
Membre
Dernière intervention
23 novembre 2008
2
21 nov. 2008 à 10:44
21 nov. 2008 à 10:44
il te faut des barrettes PC2-4300 (266 MHz) DDR2 dapres ce que jai lut voila jespere que ses la bonne reponse
Jimmon
Messages postés
106
Date d'inscription
mercredi 9 avril 2008
Statut
Membre
Dernière intervention
7 février 2010
21 nov. 2008 à 10:49
21 nov. 2008 à 10:49
Oui mais pourquoi sur les renseignements de la carte mère il me mette que ça supporte les 800 MHZ ? ça m'ennuies car j'ai commandé celle-ci. Je vais les renvoyer mais si quelqu'un d'entre vous pouvait me dire quoi prendre à la place (sur le site de pixmania svp car elles viennent de là bas). Désolé de vous ennuyer mais ça me rendrait service de savoir que prendre à la place et que ça marche cette fois. De plus je dois les renvoyer rapidement. Merci à vous tous .
[UST]Akonv!ct
Messages postés
86
Date d'inscription
vendredi 21 novembre 2008
Statut
Membre
Dernière intervention
23 novembre 2008
2
21 nov. 2008 à 11:02
21 nov. 2008 à 11:02
tu a deja mi une de 800ghz ?
Grand pilote
Messages postés
5427
Date d'inscription
mercredi 11 juin 2008
Statut
Membre
Dernière intervention
28 novembre 2017
141
21 nov. 2008 à 11:05
21 nov. 2008 à 11:05
C'est une blague, ou tu ta fait une faute de frappe?
[UST]Akonv!ct
Messages postés
86
Date d'inscription
vendredi 21 novembre 2008
Statut
Membre
Dernière intervention
23 novembre 2008
2
21 nov. 2008 à 11:07
21 nov. 2008 à 11:07
https://www.pixmania.com/ regarde ceci