Salut !

Le VPN est ton ami !! Via deux connections internet et deux routeurs.

Voilà !

Salut
merci pour l'info mais pourais tu me donner une lien sur une tuto pour relier 2 routeurs en vpn via internet?
et est ce possible de relier ces 2 routeurs avec des antennes (WIMAX)

Voilà un exemple parmi plein d'autres : http://www.netgear-forum.com/forum/index.php?showtopic=38478­

ou sinon : http://www.kogik.com/docs/vpn.php

Avec du WIMAX ça doit être possible mais ne l'ayant pas fait moi même je préfère ne pas donner d'avis pour ne pas dire de conneries !

N'oublies pas : google est ton ami !

Merci cocoche95

mais j'ai oublier de te dire que moi j'utilise des routeurs vpn linksys wrv200

Salut
ouai jvais remarquer que les menu se ressemblaient
je te tien au courant poour la suite merci

Cette page peux t'aider aussi !

http://www-fr.linksys.com/...

Merci cocoche c'est trop cool de ta part

Salut
jai fini de configurer les routeur et je pense qque jai tout bien fait mais j'arrive toujours pas a etablir un connection entre les 2 routeur (mes 2 routeurs sont directement connecter a internet il ne passe pas par un modem j'espere que c'est pas sa le bleme?)

et le log affiche sa!!!

000 [Sun 14:23:41] "TunnelA": deleting connection
001 [Sun 14:23:41] "TunnelA" #10: deleting state (STATE_QUICK_R2)
002 [Sun 14:23:41] "TunnelA" #9: deleting state (STATE_QUICK_I2)
003 [Sun 14:23:41] "TunnelA" #8: deleting state (STATE_MAIN_I4)
004 [Sun 14:23:47] added connection description "TunnelA"
005 [Sun 14:23:47] "TunnelA" #11: initiating Main Mode
006 [Sun 14:23:47] "TunnelA" #11: [WRV210 Response:] ISAKMP SA (Main Mode) Initiation
007 [Sun 14:23:47] "TunnelA" #11: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
008 [Sun 14:23:47] "TunnelA" #11: received Vendor ID payload [Dead Peer Detection]
009 [Sun 14:23:47] "TunnelA" #11: received Vendor ID payload [RFC 3947] method set to=109
010 [Sun 14:23:47] "TunnelA" #11: enabling possible NAT-traversal with method 3
011 [Sun 14:23:48] "TunnelA" #11: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
012 [Sun 14:23:48] "TunnelA" #11: STATE_MAIN_I2: sent MI2, expecting MR2
013 [Sun 14:23:48] "TunnelA" #11: I did not send a certificate because I do not have one.
014 [Sun 14:23:48] "TunnelA" #11: NAT-Traversal: Result using 3: no NAT detected
015 [Sun 14:23:48] "TunnelA" #11: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
016 [Sun 14:23:48] "TunnelA" #11: STATE_MAIN_I3: sent MI3, expecting MR3
017 [Sun 14:23:49] "TunnelA" #11: Main mode peer ID is ID_IPV4_ADDR: '196.200.92.247'
018 [Sun 14:23:49] "TunnelA" #11: transition from state STATE_MAIN_I3 to state STATE_MAIN_I4
019 [Sun 14:23:49] "TunnelA" #11: [WRV210 Response:] ISAKMP SA established
020 [Sun 14:23:49] "TunnelA" #11: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_md5 group=modp1024}
021 [Sun 14:23:49] "TunnelA" #11: Dead Peer Detection (RFC 3706): enabled
022 [Sun 14:23:49] "TunnelA" #12: [WRV210 Response:] IPSec SA (Quick Mode) Initiation
023 [Sun 14:23:49] "TunnelA" #12: initiating Quick Mode PSK+ENCRYPT+TUNNEL+PFS+UP {using isakmp#11}
024 [Sun 14:23:52] "TunnelA" #12: Dead Peer Detection (RFC 3706): enabled
025 [Sun 14:23:52] "TunnelA" #12: transition from state STATE_QUICK_I1 to state STATE_QUICK_I2
026 [Sun 14:23:52] "TunnelA" #12: [WRV210 Response:] IPSec SA established
027 [Sun 14:23:52] "TunnelA" #12: STATE_QUICK_I2: sent QI2, IPsec SA established {ESP=>0x77bbc6b8 <0x258e927b xfrm=3DES_0-HMAC_MD5 NATD=none DPD=enabled}
028 [Sun 14:23:53] "TunnelA" #13: responding to Quick Mode {msgid:166cbb2e}
029 [Sun 14:23:53] "TunnelA" #13: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1
030 [Sun 14:23:53] "TunnelA" #13: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2
031 [Sun 14:23:53] "TunnelA" #13: Dead Peer Detection (RFC 3706): enabled
032 [Sun 14:23:53] "TunnelA" #13: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2
033 [Sun 14:23:53] "TunnelA" #13: [WRV210 Response:] IPSec SA established
034 [Sun 14:23:53] "TunnelA" #13: STATE_QUICK_R2: IPsec SA established {ESP=>0x77bbc6b9 <0x258e927c xfrm=3DES_0-HMAC_MD5 NATD=none DPD=enabled}
035 [Sun 14:24:01] "TunnelA" #11: ignoring Delete SA payload: PROTO_IPSEC_ESP SA(0x77bbc6b7) not found (maybe expired)
036 [Sun 14:24:01] "TunnelA" #11: received and ignored informational message

Franchement, je vois rien d'anormal, essayes de contacter un techos de linksys. Moi je suis plutôt netgear ! lol

Là franchement, je vois pas... Désolé !

Maintenant ca me donne sa

000 [Sun 08:50:04] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
001 [Sun 08:50:04] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
002 [Sun 08:50:04] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
003 [Sun 08:50:04] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
004 [Sun 08:50:04] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
005 [Sun 08:50:04] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
006 [Sun 08:50:04] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
007 [Sun 08:50:12] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
008 [Sun 08:50:12] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
009 [Sun 08:50:12] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
010 [Sun 08:50:12] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
011 [Sun 08:50:12] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
012 [Sun 08:50:12] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
013 [Sun 08:50:12] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
014 [Sun 08:50:22] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
015 [Sun 08:50:22] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
016 [Sun 08:50:22] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
017 [Sun 08:50:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
018 [Sun 08:50:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
019 [Sun 08:50:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
020 [Sun 08:50:22] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
021 [Sun 08:50:42] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
022 [Sun 08:50:42] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
023 [Sun 08:50:42] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
024 [Sun 08:50:42] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
025 [Sun 08:50:42] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
026 [Sun 08:50:42] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
027 [Sun 08:50:42] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
028 [Sun 08:51:22] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
029 [Sun 08:51:22] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
030 [Sun 08:51:22] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
031 [Sun 08:51:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
032 [Sun 08:51:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
033 [Sun 08:51:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
034 [Sun 08:51:22] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
035 [Sun 08:51:40] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
036 [Sun 08:51:40] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
037 [Sun 08:51:40] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
038 [Sun 08:51:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
039 [Sun 08:51:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
040 [Sun 08:51:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
041 [Sun 08:51:40] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
042 [Sun 08:52:00] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
043 [Sun 08:52:00] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
044 [Sun 08:52:00] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
045 [Sun 08:52:00] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
046 [Sun 08:52:00] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
047 [Sun 08:52:00] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
048 [Sun 08:52:00] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
049 [Sun 08:52:40] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
050 [Sun 08:52:40] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
051 [Sun 08:52:40] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
052 [Sun 08:52:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
053 [Sun 08:52:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
054 [Sun 08:52:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
055 [Sun 08:52:40] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
056 [Sun 08:52:50] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
057 [Sun 08:52:50] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
058 [Sun 08:52:50] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
059 [Sun 08:52:50] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
060 [Sun 08:52:50] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
061 [Sun 08:52:50] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
062 [Sun 08:52:50] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
063 [Sun 08:52:59] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
064 [Sun 08:52:59] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
065 [Sun 08:52:59] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
066 [Sun 08:52:59] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
067 [Sun 08:52:59] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
068 [Sun 08:52:59] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
069 [Sun 08:52:59] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
070 [Sun 08:53:19] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
071 [Sun 08:53:19] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
072 [Sun 08:53:19] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
073 [Sun 08:53:19] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
074 [Sun 08:53:19] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
075 [Sun 08:53:19] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
076 [Sun 08:53:19] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
077 [Sun 08:53:42] forgetting secrets
078 [Sun 08:53:42] loading secrets from "/etc/ipsec.secrets"
079 [Sun 08:53:42] "TunnelA": deleting connection
080 [Sun 08:53:47] added connection description "TunnelA"
081 [Sun 08:53:47] "TunnelA": We cannot identify ourselves with either end of this connection.
082 [Sun 08:54:00] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
083 [Sun 08:54:00] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
084 [Sun 08:54:00] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
085 [Sun 08:54:00] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
086 [Sun 08:54:00] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
087 [Sun 08:54:00] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
088 [Sun 08:54:00] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
089 [Sun 08:54:09] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
090 [Sun 08:54:09] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
091 [Sun 08:54:09] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
092 [Sun 08:54:09] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
093 [Sun 08:54:09] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
094 [Sun 08:54:09] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
095 [Sun 08:54:09] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
096 [Sun 08:54:18] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
097 [Sun 08:54:18] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
098 [Sun 08:54:18] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
099 [Sun 08:54:18] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
100 [Sun 08:54:18] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
101 [Sun 08:54:18] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
102 [Sun 08:54:18] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
103 [Sun 08:54:38] packet from 196.200.87.23:500: received Vendor ID payload [Openswan (this version) 2.4.5dr3 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
104 [Sun 08:54:38] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
105 [Sun 08:54:38] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
106 [Sun 08:54:38] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
107 [Sun 08:54:38] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
108 [Sun 08:54:38] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
109 [Sun 08:54:38] packet from 196.200.87.23:500: initial Main Mode message received on 196.200.83.226:500 but no connection has been authorized
110 [Sun 08:55:09] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
111 [Sun 08:55:09] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
112 [Sun 08:55:09] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
113 [Sun 08:55:09] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
114 [Sun 08:55:09] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
115 [Sun 08:55:09] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
116 [Sun 08:55:19] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
117 [Sun 08:55:19] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
118 [Sun 08:55:19] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
119 [Sun 08:55:19] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
120 [Sun 08:55:19] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
121 [Sun 08:55:19] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
122 [Sun 08:55:39] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
123 [Sun 08:55:39] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
124 [Sun 08:55:39] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
125 [Sun 08:55:39] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
126 [Sun 08:55:39] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
127 [Sun 08:55:39] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
128 [Sun 08:56:29] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
129 [Sun 08:56:29] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
130 [Sun 08:56:29] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
131 [Sun 08:56:29] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
132 [Sun 08:56:29] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
133 [Sun 08:56:29] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
134 [Sun 08:56:47] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
135 [Sun 08:56:47] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
136 [Sun 08:56:47] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
137 [Sun 08:56:47] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
138 [Sun 08:56:47] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
139 [Sun 08:56:47] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
140 [Sun 08:57:17] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
141 [Sun 08:57:17] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
142 [Sun 08:57:17] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
143 [Sun 08:57:17] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
144 [Sun 08:57:17] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
145 [Sun 08:57:17] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
146 [Sun 08:58:05] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
147 [Sun 08:58:05] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
148 [Sun 08:58:05] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
149 [Sun 08:58:05] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
150 [Sun 08:58:05] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
151 [Sun 08:58:05] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
152 [Sun 08:58:15] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
153 [Sun 08:58:15] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
154 [Sun 08:58:15] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
155 [Sun 08:58:15] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
156 [Sun 08:58:15] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
157 [Sun 08:58:15] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
158 [Sun 08:58:35] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
159 [Sun 08:58:35] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
160 [Sun 08:58:35] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
161 [Sun 08:58:35] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
162 [Sun 08:58:35] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
163 [Sun 08:58:35] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
164 [Sun 08:59:22] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
165 [Sun 08:59:22] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
166 [Sun 08:59:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
167 [Sun 08:59:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
168 [Sun 08:59:22] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
169 [Sun 08:59:22] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
170 [Sun 08:59:32] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
171 [Sun 08:59:32] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
172 [Sun 08:59:32] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
173 [Sun 08:59:32] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
174 [Sun 08:59:32] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
175 [Sun 08:59:32] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
176 [Sun 08:59:52] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
177 [Sun 08:59:52] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
178 [Sun 08:59:52] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
179 [Sun 08:59:52] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
180 [Sun 08:59:52] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
181 [Sun 08:59:52] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
182 [Sun 09:00:40] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
183 [Sun 09:00:40] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
184 [Sun 09:00:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
185 [Sun 09:00:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
186 [Sun 09:00:40] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
187 [Sun 09:00:40] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
188 [Sun 09:00:50] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
189 [Sun 09:00:50] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
190 [Sun 09:00:50] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
191 [Sun 09:00:50] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
192 [Sun 09:00:50] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
193 [Sun 09:00:50] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
194 [Sun 09:01:10] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
195 [Sun 09:01:10] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
196 [Sun 09:01:10] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
197 [Sun 09:01:10] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
198 [Sun 09:01:10] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
199 [Sun 09:01:10] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
200 [Sun 09:01:57] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
201 [Sun 09:01:57] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
202 [Sun 09:01:57] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
203 [Sun 09:01:57] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
204 [Sun 09:01:57] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]
205 [Sun 09:01:57] packet from 196.200.87.23:500: initial Aggressive Mode message from 196.200.87.23 but no (wildcard) connection has been configured
206 [Sun 09:02:27] packet from 196.200.87.23:500: received Vendor ID payload [Dead Peer Detection]
207 [Sun 09:02:27] packet from 196.200.87.23:500: received Vendor ID payload [RFC 3947] method set to=109
208 [Sun 09:02:27] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 109
209 [Sun 09:02:27] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 109
210 [Sun 09:02:27] packet from 196.200.87.23:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]

Je vois toujours pas ! Désolé !

Essayes de contacter Brupala http://www.commentcamarche.net/communaute/profil-brupala , peut être qu'il saura faire ou t'aider mieux que moi !

Ok merci pour l'info tu ma vrai aide je te remerci 123445890 fois

Cet utilisateur n'est pas membre de CommentCaMarche.net

Concernant le Wimax, pour l'avoir déjà installé, je peux te dire que ça dépote.

Evidemment, il faut faire une petite étude préalable pour vérifier la visée directe entre les deux sites (pas d'obstacles)

pas besoin de VPN, ce lien se comportera comme un cable RJ45
et un débit de 100Mbs!!! et un ping équivalent à un cordon..

La marque leader : www.alvarion.fr (voir le produit breezeNetBee)

Distribué par connectdata en france

Des sociétés sont spécialisées pour l'instal et la mise en servive (par ex www.qostelecom.fr )

voilou

Oui, mais ne t'attends pas à un débit important.
A mon avis, à 20km, tu n'atteindras que difficilement 5 ou 6 mbits et encore, je suis tres optimiste.
De plus, la régularité du lien sera plus que douteuse, le wifi étant du best effort...
En plus, il faudra prier pour qu'il n'y est pas de perturbations le long de la liaison...
Bref, le WIFI sur 20km, c'est pô gagné...

Pour info, si ça t'interresse, je peux t'aider à faire un profil topographique de ta liaison (on a tout ce qu'il faut à la boite ;) et ainsi, vérifier si c'est réalisable ... (à moins que tu ai une visée directe avec tes jumelles!)

hop..

Normalement, il ne faut pas d'obstacles....
Concernant l'installation des alvarions, il n'y aura qu'à configurer la clé, et la fréquence. Rien à faire sur tes réseaux locaux...

C'est vraiment très simple, la doc est livrée avec.

Je pourrais t'aider, de toutes façon.

Si tu veux qu'on fasse un essai topo, envoi moi juste les coordonnées de tes sites (en Lambert II si possible)
Si tu ne les a pas, trouves les sur www.geoportail.fr

Idées recues ....

il est inutile de compliquer les choses en matière de distance, de portée, etc, entre 2 points dits A et B qui peuvent être imaginés de composition quelconque, 2 PC éloignés, 1 camara Wifi distance avec routeur, 2 routeurs séparés, 1 box avec un serveur, avec une clée, on s'en fout de la configuration particulière ...

Ce qui compte c'est que les accessoires Wifi choisis soient dotés d'un connecteur SMA pour y brancher une antenne exterieure, gain de 10 à 25 dB, gain à définir notamment en fonction de la distance et la nature du trajet. Les radiommateurs connaissent et appliquent ce principe depuis bien longtemps, ignoré, le plus souvent, pas les "simples" wifistes..

2 Antennes identiques doubleront le gain dans le bilan de liaison, ce qui a rien à voir avec le doublage de la distance entre A et B. Chaque fois que l'on double la distance, il faut 6 dB de plus au système, soit sur l'antenne A ou B, soit la moitié sur l A1 et l'autre moitié sur A 2, en ne perdant pas de vue que l'on multiplie aussi par 2 les problemes potentiels fréquents en 2.4 Ghz car cette bande ISM est de type partagée...on est pas les seuls, il y a aussi les radiamateurs et autres colocataires.

En wifi il est recommandé que les liaisons ( antenne à antenne) soient "à vue", car si obstacle les atténuations peuvent parfois être violentes, mais tout dépendra de nombreux facteurs, comme l'emplacement et la composition de l 'obstacle dans le trajet..

Voici ce qui compte et ce qu'il faut privilégier avant tout, en évitant les amplificateurs ( aspect spectral impur). On pourra toutefois envisager un répéteur.

On utilisera une ( ou 2) antenne directive ( ex plate ou parabole en polarisation verticale) et surtout un coaxial de bonne qualité, faible perte, et le plus court possible, 10 m c'est déjà pas mal , jusqu' - 4 dB .( à déduire du gain d'antenne). On soigne la connectique, attention aux raccords..

Etablir des liaisons wifi sur 10 ou 20 km ce n'est pas dans le domaine de l'inimaginable, toutefois il faut que la liaison soit ensuite perenne......, chute du débit avec l'arrivée d'un autre sytème 2.4 Ghz dans le secteur...

Et évidemment, en respectant les PIRE max autorisées en France...
http://www.wifirst.fr/livrewifi/annexeD.pdf