Salut,

Tu peux être plus précis sur le modèle en question s'il te plaît ? Emtec S825 ?

Pour le logiciel, alors pour la DVB-T alors c'est Kaffeine qui est le plus conseillé.
http://doc.ubuntu-fr.org/kaffeine
Pour l'analogique TVtime est pas mal :
http://doc.ubuntu-fr.org/tvtime

Sinon VLC n'est pas trop recommandé pour la DVB-T, puis le logiciel windows sous wine n'est pas forcément simple à mettre en place, il risque d'y avoir trop de dépendances à gérer pour une installation propre.

Dans le terminal, juste après avoir mis en place ta clé peux tu dire quel est le résultat après avoir fait un :
lsusb

Puis que te donne :
dmesg

Bon courage et n'hésite pas à chercher un peu dans la doc ubuntu ainsi que son forum tu devrais trouver pas mal d'éléments de réponse par toi même ;)
Ignorer n'est pas une honte en soit, en revanche se plaire à­ persister dans l'ignorance l'est !!!

Oui, c'est la S825 : http://www.cd-media.co.uk/shop/images/4791.jpg

bon je vais voir kaféine et tv time! 19/01/2038  03:14:07 UT

Ca ne marche pas : on dirait que le tuner usb n'est pas reconnu par l'ordi : caféine me dit qu'il n'y a pas de tunner dvb et tvtime me donne l'image de le web cam, et si je lui dit de changer de périphérique, il me dit "pas de périphérique"...

J'ai même fait un redémarrage de l'ordi entre temps, mais rien n'y fait... 19/01/2038  03:14:07 UT

Ok, alors j'ai besoin de :
"
Dans le terminal, juste après avoir mis en place ta clé peux tu dire quel est le résultat après avoir fait un :
lsusb

Puis que te donne :
dmesg
"
Tu as juste à copier coller les résultats et je tenterai de faire au mieux pour t'aider à installer le bon firmware. Merci. Ignorer n'est pas une honte en soit, en revanche se plaire à persister dans l'ignorance l'est !!!

~$ lsusb
Bus 005 Device 004: ID 04ca:f004 Lite-On Technology Corp.
Bus 005 Device 003: ID 174f:a311
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
~$


et pour le seconde commande il semble ne pas y avoir asser de place dans le termeinal, donc voici ce qu'il me donne :

[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524224
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524224
[ 0.000000] On node 0 totalpages: 524224
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292545 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6980 checksum 0
[ 0.000000] ACPI: RSDP 000F6980, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFC0000, 0038 (r1 A M I OEMRSDT 3000613 MSFT 97)
[ 0.000000] ACPI: FACP 7FFC0200, 0084 (r2 A M I OEMFACP 3000613 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFC0430, 89E6 (r1 0AAAA 0AAAA000 0 INTL 2002026)
[ 0.000000] ACPI: FACS 7FFCF000, 0040
[ 0.000000] ACPI: APIC 7FFC0390, 0054 (r1 A M I OEMAPIC 3000613 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFC03F0, 003C (r1 A M I OEMMCFG 3000613 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFCF040, 0040 (r1 A M I AMI_OEM 3000613 MSFT 97)
[ 0.000000] ACPI: SSDT 7FFC8E20, 02D2 (r1 AMI CPU1PM 1 INTL 2002026)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ed14000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520129
[ 0.000000] Kernel command line: root=UUID=f1d1e3d0-d303-487b-a210-03f9c5a2d1e6 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.067 MHz processor.
[ 14.845860] Console: colour VGA+ 80x25
[ 14.845864] console [tty0] enabled
[ 14.846166] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.846573] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.955433] Memory: 2067100k/2096896k available (2157k kernel code, 28624k reserved, 998k data, 364k init, 1179392k highmem)
[ 14.955442] virtual kernel memory layout:
[ 14.955444] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 14.955445] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.955446] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.955447] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.955449] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 14.955450] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 14.955451] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 14.955455] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.955507] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 15.035502] Calibrating delay using timer specific routine.. 3461.16 BogoMIPS (lpj=6922335)
[ 15.035538] Security Framework initialized
[ 15.035548] SELinux: Disabled at boot.
[ 15.035566] AppArmor: AppArmor initialized
[ 15.035571] Failure registering capabilities with primary security module.
[ 15.035580] Mount-cache hash table entries: 512
[ 15.035740] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 15.035754] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.035757] CPU: L2 cache: 2048K
[ 15.035760] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 15.035770] Compat vDSO mapped to ffffe000.
[ 15.035783] Checking 'hlt' instruction... OK.
[ 15.051868] SMP alternatives: switching to UP code
[ 15.053695] Freeing SMP alternatives: 11k freed
[ 15.053808] Early unpacking initramfs... done
[ 15.407473] ACPI: Core revision 20070126
[ 15.407557] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.463961] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 15.463984] Total of 1 processors activated (3461.16 BogoMIPS).
[ 15.464138] ENABLING IO-APIC IRQs
[ 15.464312] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.611340] Brought up 1 CPUs
[ 15.611363] CPU0 attaching sched-domain:
[ 15.611366] domain 0: span 01
[ 15.611367] groups: 01
[ 15.611518] net_namespace: 64 bytes
[ 15.611530] Booting paravirtualized kernel on bare hardware
[ 15.611988] Time: 10:33:26 Date: 08/29/08
[ 15.612012] NET: Registered protocol family 16
[ 15.612192] EISA bus registered
[ 15.612213] ACPI: bus type pci registered
[ 15.612416] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 15.612418] PCI: Using configuration type 1
[ 15.612420] Setting up standard PCI resources
[ 15.616138] ACPI: EC: Look up EC in DSDT
[ 15.715736] ACPI: Interpreter enabled
[ 15.715739] ACPI: (supports S0 S3 S4 S5)
[ 15.715756] ACPI: Using IOAPIC for interrupt routing
[ 15.723179] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 15.723182] ACPI: EC: driver started in poll mode
[ 15.723330] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.723904] Force enabled HPET at base address 0xfed00000
[ 15.723911] PCI: Enabled ICH6/i801 SMBus device
[ 15.723916] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 15.723920] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 15.724580] PCI: Transparent bridge - 0000:00:1e.0
[ 15.724647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.724834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 15.725021] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 15.728579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 15.728744] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
[ 15.728905] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
[ 15.729065] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12)
[ 15.729225] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
[ 15.729384] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 15.729545] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
[ 15.729704] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[ 15.729851] ACPI: Power Resource [GFAN] (off)
[ 15.729889] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.729918] pnp: PnP ACPI init
[ 15.729924] ACPI: bus type pnp registered
[ 15.733606] pnp: PnP ACPI: found 14 devices
[ 15.733608] ACPI: ACPI bus type pnp unregistered
[ 15.733613] PnPBIOS: Disabled by ACPI PNP
[ 15.733812] PCI: Using ACPI for IRQ routing
[ 15.733815] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.747285] NET: Registered protocol family 8
[ 15.747288] NET: Registered protocol family 20
[ 15.747442] hpet clockevent registered
[ 15.747447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.747452] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.748485] AppArmor: AppArmor Filesystem Enabled
[ 15.751248] Time: tsc clocksource has been installed.
[ 15.759282] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 15.759285] system 00:09: ioport range 0x800-0x87f has been reserved
[ 15.759288] system 00:09: ioport range 0x400-0x41f has been reserved
[ 15.759290] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 15.759294] system 00:09: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 15.759297] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 15.759300] system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 15.759305] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 15.759308] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 15.759313] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 15.759318] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 15.759324] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 15.759327] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 15.759330] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 15.759333] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 15.759336] system 00:0d: iomem range 0xfec00001-0xffffffff could not be reserved
[ 15.789700] PCI: Bridge: 0000:00:01.0
[ 15.789702] IO window: disabled.
[ 15.789705] MEM window: fa900000-fe9fffff
[ 15.789708] PREFETCH window: bfe00000-dfefffff
[ 15.789718] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 15.789720] IO window: 0000d000-0000d0ff
[ 15.789725] IO window: 0000d400-0000d4ff
[ 15.789729] PREFETCH window: 88000000-8bffffff
[ 15.789734] MEM window: 8c000000-8fffffff
[ 15.789738] PCI: Bridge: 0000:00:1e.0
[ 15.789741] IO window: d000-dfff
[ 15.789746] MEM window: fea00000-feafffff
[ 15.789749] PREFETCH window: disabled.
[ 15.789765] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.789770] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.789780] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.789794] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 15.789807] NET: Registered protocol family 2
[ 15.827277] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.827494] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 15.828246] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.828698] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.828701] TCP reno registered
[ 15.839368] checking if image is initramfs... it is
[ 16.251063] Switched to high resolution mode on CPU 0
[ 16.531398] Freeing initrd memory: 7308k freed
[ 16.531975] audit: initializing netlink socket (disabled)
[ 16.531990] audit(1220006006.348:1): initialized
[ 16.532195] highmem bounce pool size: 64 pages
[ 16.534045] VFS: Disk quotas dquot_6.5.1
[ 16.534117] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.534256] io scheduler noop registered
[ 16.534259] io scheduler anticipatory registered
[ 16.534261] io scheduler deadline registered
[ 16.534272] io scheduler cfq registered (default)
[ 16.534359] Boot video device is 0000:01:00.0
[ 16.534462] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.534491] assign_interrupt_mode Found MSI capability
[ 16.534517] Allocate Port Service[0000:00:01.0:pcie00]
[ 16.534740] isapnp: Scanning for PnP cards...
[ 16.888873] isapnp: No Plug & Play device found
[ 16.914547] Real Time Clock Driver v1.12ac
[ 16.914656] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.914859] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.915912] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.915976] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 16.916070] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 16.918249] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 16.919412] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.919416] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 16.919419] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 16.919421] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 16.919423] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 16.930786] mice: PS/2 mouse device common for all mice
[ 16.930887] EISA: Probing bus 0 at eisa.0
[ 16.930916] EISA: Detected 0 cards.
[ 16.930919] cpuidle: using governor ladder
[ 16.930921] cpuidle: using governor menu
[ 16.931009] NET: Registered protocol family 1
[ 16.931034] Using IPI No-Shortcut mode
[ 16.931065] registered taskstats version 1
[ 16.931165] Magic number: 4:281:579
[ 16.931247] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 16.931250] EDD information not available.
[ 16.931432] Freeing unused kernel memory: 364k freed
[ 16.966719] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 18.135862] fuse init (API version 7.9)
[ 18.151886] ACPI: Transitioning device [FN00] to D3
[ 18.151889] ACPI: Transitioning device [FN00] to D3
[ 18.151892] ACPI: Fan [FN00] (off)
[ 18.158718] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 18.158723] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.189116] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 18.196468] ACPI: Thermal Zone [THRM] (48 C)
[ 18.861946] usbcore: registered new interface driver usbfs
[ 18.861969] usbcore: registered new interface driver hub
[ 18.869924] usbcore: registered new device driver usb
[ 18.885893] USB Universal Host Controller Interface driver v3.0
[ 18.885952] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 18.885963] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 18.885967] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 18.887065] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 18.887096] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e480
[ 18.887228] usb usb1: configuration #1 chosen from 1 choice
[ 18.887252] hub 1-0:1.0: USB hub found
[ 18.887256] hub 1-0:1.0: 2 ports detected
[ 18.954237] SCSI subsystem initialized
[ 18.990447] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 18.990459] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 18.990464] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 18.990486] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 18.990514] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 18.990621] usb usb2: configuration #1 chosen from 1 choice
[ 18.990644] hub 2-0:1.0: USB hub found
[ 18.990649] hub 2-0:1.0: 2 ports detected
[ 19.021420] libata version 3.00 loaded.
[ 19.093872] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 19.093884] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 19.093888] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.093910] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 19.093939] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e880
[ 19.094047] usb usb3: configuration #1 chosen from 1 choice
[ 19.094078] hub 3-0:1.0: USB hub found
[ 19.094083] hub 3-0:1.0: 2 ports detected
[ 19.197821] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 19.197833] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 19.197838] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 19.197860] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 19.197889] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 19.197997] usb usb4: configuration #1 chosen from 1 choice
[ 19.198020] hub 4-0:1.0: USB hub found
[ 19.198025] hub 4-0:1.0: 2 ports detected
[ 19.301903] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 19.301917] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 19.301921] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.301944] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 19.305862] ehci_hcd 0000:00:1d.7: debug port 1
[ 19.305868] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 19.305875] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfebfbc00
[ 19.333682] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 19.345687] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.345806] usb usb5: configuration #1 chosen from 1 choice
[ 19.345830] hub 5-0:1.0: USB hub found
[ 19.345836] hub 5-0:1.0: 8 ports detected
[ 19.449857] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 19.449900] skge 1.13 addr 0xfeafc000 irq 21 chip Yukon-Lite rev 9
[ 19.450162] skge eth0: addr 00:17:31:a3:22:cd
[ 19.450236] ata_piix 0000:00:1f.1: version 2.12
[ 19.450249] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
[ 19.450279] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 19.451170] scsi0 : ata_piix
[ 19.451632] scsi1 : ata_piix
[ 19.452895] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 19.452899] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 19.745493] Clocksource tsc unstable (delta = -10250789582 ns)
[ 19.749483] Time: hpet clocksource has been installed.
[ 19.750530] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 19.780608] usb 5-4: configuration #1 chosen from 1 choice
[ 19.822099] ata1.00: ATA-8: WDC WD1600BEVE-00WZT0, 01.01A01, max UDMA/100
[ 19.822102] ata1.00: 312581808 sectors, multi 16: LBA48
[ 19.822131] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632C, AS07, max UDMA/33
[ 19.823957] ata1.00: configured for UDMA/100
[ 19.825160] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 19.854117] ata1.01: configured for UDMA/33
[ 19.855789] usb 5-5: configuration #1 chosen from 1 choice
[ 19.923411] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 01.0 PQ: 0 ANSI: 5
[ 19.924073] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L632C AS07 PQ: 0 ANSI: 5
[ 19.926086] ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 18 (level, low) -> IRQ 20
[ 19.978818] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feafb000-feafb7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 20.000468] Driver 'sd' needs updating - please use bus_type methods
[ 20.000541] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 20.000553] sd 0:0:0:0: [sda] Write Protect is off
[ 20.000556] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.000571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.000614] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 20.000623] sd 0:0:0:0: [sda] Write Protect is off
[ 20.000625] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.000640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.000643] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 20.007565] sda1 sda2 sda3
[ 20.008560] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.014126] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.014144] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 20.040019] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 20.040024] Uniform CD-ROM driver Revision: 3.20
[ 20.040070] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 20.114122] Attempting manual resume
[ 20.114126] swsusp: Resume From Partition 8:3
[ 20.114128] PM: Checking swsusp image.
[ 20.114269] PM: Resume from disk failed.
[ 20.128760] kjournald starting. Commit interval 5 seconds
[ 20.128768] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.207394] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003590bb5]
[ 22.263203] Linux agpgart interface v0.102
[ 22.492893] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.536899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.696912] input: Power Button (FF) as /devices/virtual/input/input2
[ 22.712751] ACPI: Power Button (FF) [PWRF]
[ 22.712851] input: Lid Switch as /devices/virtual/input/input3
[ 22.712954] ACPI: Lid Switch [LID]
[ 22.713013] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 22.724747] ACPI: Sleep Button (CM) [SLPB]
[ 23.244552] asus-laptop: Asus Laptop Support version 0.42
[ 23.244808] asus-laptop: A6VM model detected
[ 23.247426] Registered led device: asus:mail
[ 24.104569] nvidia: module license 'NVIDIA' taints kernel.
[ 24.860410] iTCO_vendor_support: vendor-support=0
[ 24.907718] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 24.907802] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 24.907832] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.952145] ieee80211_crypt: registered algorithm 'NULL'
[ 24.999624] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 24.999628] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 25.043813] ACPI: AC Adapter [AC0] (on-line)
[ 25.138010] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 25.147592] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 25.147874] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:25/LNXVIDEO:01/input/input6
[ 25.163578] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 25.204240] Yenta: CardBus bridge found at 0000:02:01.0 [1043:1177]
[ 25.241469] ACPI: Battery Slot [BAT0] (battery present)
[ 25.307523] intel_rng: FWH not detected
[ 25.332280] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17
[ 25.332284] Socket status: 30000006
[ 25.332286] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 25.332291] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[ 25.332294] cs: IO port probe 0xd000-0xdfff: clean.
[ 25.332504] pcmcia: parent PCI bridge Memory window: 0xfea00000 - 0xfeafffff
[ 25.403489] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 25.403493] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 25.403585] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 25.455443] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 25.491442] sdhci: Secure Digital Host Controller Interface driver
[ 25.491445] sdhci: Copyright(c) Pierre Ossman
[ 26.107241] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 26.331038] Linux video capture interface: v2.00
[ 26.395011] stk11xx: Syntek USB2.0 webcam driver startup
[ 26.395076] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[ 26.395079] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0xA311.
[ 26.395082] stk11xx: Release: 0001
[ 26.395084] stk11xx: Number of interfaces : 3
[ 26.395532] stk11xx: Initialize USB2.0 Syntek Camera
[ 26.555338] irda_init()
[ 26.555356] NET: Registered protocol family 23
[ 26.611042] stk11xx: Syntek USB2.0 Camera is ready
[ 26.611079] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 26.611114] usbcore: registered new interface driver usb_stk11xx_driver
[ 26.611118] stk11xx: v1.3.1 : Syntek USB Video Camera
[ 26.727995] usbcore: registered new interface driver snd-usb-audio
[ 26.838869] parport_pc 00:08: reported by Plug and Play ACPI
[ 26.838898] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 27.788221] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 27.825127] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 28.597497] cs: IO port probe 0x100-0x3af: clean.
[ 28.598933] cs: IO port probe 0x3e0-0x4ff: clean.
[ 28.599313] cs: IO port probe 0x820-0x8ff: clean.
[ 28.599597] cs: IO port probe 0xc00-0xcf7: clean.
[ 28.600197] cs: IO port probe 0xa00-0xaff: clean.
[ 28.648763] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 28.648790] sdhci: SDHCI controller found at 0000:02:01.2 [1180:0822] (rev 17)
[ 28.648818] ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 19 (level, low) -> IRQ 19
[ 28.648840] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 28.648879] mmc0: SDHCI at 0xfeafb800 irq 19 DMA
[ 28.653938] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.653953] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 28.750823] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.750833] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 28.750952] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 28.904068] lp0: using parport0 (interrupt-driven).
[ 28.945657] Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k
[ 29.023646] EXT3 FS on sda2, internal journal
[ 29.393197] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.616792] No dock devices found.
[ 30.292942] apm: BIOS not found.
[ 30.338007] ppdev: user-space parallel port driver
[ 30.361221] audit(1219998839.847:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5014 profile="/usr/sbin/cupsd" namespace="default"
[ 49.453287] Marking TSC unstable due to: cpufreq changes.
[ 31.245061] skge eth0: enabling interface
[ 77.375615] NET: Registered protocol family 10
[ 77.376680] lo: Disabled Privacy Extensions
[ 77.378013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 77.379069] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 41.197283] NET: Registered protocol family 17
[ 41.508846] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 51.975509] eth1: no IPv6 routers present
[ 64.454357] stk11xx: Check device return error (0x0201 = 0C) !
[ 64.454364] stk11xx: Load default sensor settings fail !
[ 73.615584] stk11xx: Frame buffer overflow !
[ 73.615909] stk11xx: Frame buffer overflow !
[ 74.307432] stk11xx: Frame buffer overflow !
[ 74.307834] stk11xx: Frame buffer overflow !
[ 85.381521] stk11xx: Frame buffer overflow !
[ 85.381531] stk11xx: Frame buffer overflow !
[ 85.381533] stk11xx: Frame buffer overflow !
[ 85.381535] stk11xx: Frame buffer overflow !
[ 85.381536] stk11xx: Frame buffer overflow !
[ 85.381538] stk11xx: Frame buffer overflow !
[ 85.381540] stk11xx: Frame buffer overflow !
[ 85.381541] stk11xx: Frame buffer overflow !
[ 85.382768] stk11xx: Frame buffer overflow !
[ 85.382772] stk11xx: Frame buffer overflow !
[ 85.382774] stk11xx: Frame buffer overflow !
[ 85.382775] stk11xx: Frame buffer overflow !
[ 85.382777] stk11xx: Frame buffer overflow !
[ 85.382779] stk11xx: Frame buffer overflow !
[ 85.382780] stk11xx: Frame buffer overflow !
[ 85.382782] stk11xx: Frame buffer overflow !
[ 85.382784] stk11xx: Frame buffer overflow !
[ 85.382785] stk11xx: Frame buffer overflow !
[ 85.384018] stk11xx: Frame buffer overflow !
[ 85.384022] stk11xx: Frame buffer overflow !
[ 85.384024] stk11xx: Frame buffer overflow !
[ 85.384026] stk11xx: Frame buffer overflow !
[ 85.384027] stk11xx: Frame buffer overflow !
[ 85.384029] stk11xx: Frame buffer overflow !
[ 85.384031] stk11xx: Frame buffer overflow !
[ 85.384032] stk11xx: Frame buffer overflow !
[ 85.384034] stk11xx: Frame buffer overflow !
[ 85.384036] stk11xx: Frame buffer overflow !
[ 85.385268] stk11xx: Frame buffer overflow !
[ 85.385274] stk11xx: Frame buffer overflow !
[ 85.385276] stk11xx: Frame buffer overflow !
[ 85.385277] stk11xx: Frame buffer overflow !
[ 85.385279] stk11xx: Frame buffer overflow !
[ 85.385281] stk11xx: Frame buffer overflow !
[ 85.385282] stk11xx: Frame buffer overflow !
[ 85.385284] stk11xx: Frame buffer overflow !
[ 85.385285] stk11xx: Frame buffer overflow !
[ 85.385287] stk11xx: Frame buffer overflow !
[ 85.386517] stk11xx: Frame buffer overflow !
[ 85.386521] stk11xx: Frame buffer overflow !
[ 85.386523] stk11xx: Frame buffer overflow !
[ 85.386525] stk11xx: Frame buffer overflow !
[ 85.386526] stk11xx: Frame buffer overflow !
[ 85.386528] stk11xx: Frame buffer overflow !
[ 85.386529] stk11xx: Frame buffer overflow !
[ 85.386531] stk11xx: Frame buffer overflow !
[ 85.386533] stk11xx: Frame buffer overflow !
[ 85.386534] stk11xx: Frame buffer overflow !
[ 85.387766] stk11xx: Frame buffer overflow !
[ 85.387770] stk11xx: Frame buffer overflow !
[ 85.387771] stk11xx: Frame buffer overflow !
[ 85.387773] stk11xx: Frame buffer overflow !
[ 85.387775] stk11xx: Frame buffer overflow !
[ 85.387776] stk11xx: Frame buffer overflow !
[ 85.387778] stk11xx: Frame buffer overflow !
[ 85.387780] stk11xx: Frame buffer overflow !
[ 85.387781] stk11xx: Frame buffer overflow !
[ 85.387783] stk11xx: Frame buffer overflow !
[ 87.068392] stk11xx: Frame buffer overflow !
[ 87.068401] stk11xx: Frame buffer overflow !
[ 87.337405] stk11xx: Frame buffer overflow !
[ 87.337415] stk11xx: Frame buffer overflow !
[ 97.275093] stk11xx: Frame buffer overflow !
[ 97.275102] stk11xx: Frame buffer overflow !
[ 124.554661] stk11xx: Check device return error (0x0201 = 0C) !
[ 124.554669] stk11xx: Load default sensor settings fail !
[ 145.890663] stk11xx: Check device return error (0x0201 = 0C) !
[ 145.890671] stk11xx: Load default sensor settings fail !
[ 152.323050] stk11xx: Frame buffer overflow !
[ 152.323057] stk11xx: Frame buffer overflow !
[ 934.777722] usb 5-4: USB disconnect, address 2
[ 3611.800448] usb 5-4: new high speed USB device using ehci_hcd and address 4
[ 3611.834534] usb 5-4: configuration #1 chosen from 1 choice
:~$ 19/01/2038  03:14:07 UT

UP Please...

en fait dans ce que j'ai posté, il y a ceci et le LITE-ON c'est de mon tuner... donc il est bien en partie reconnu, mais je ne trouve pas de drivers... Pourtant certains disent avoir réussi... Il semble qu'il font des tuner "linux-capable" si certains en ont testé, y'a t'il les driver fournis? sont t'il déja avec le kernel? (car j'ai pas internet sur mon PC ubuntu...)
~$ lsusb
Bus 005 Device 004: ID 04ca:f004 Lite-On Technology Corp.
Bus 005 Device 003: ID 174f:a311
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
~$ Windows n'est pas un envirronement sûr, on n'est jamais à l'abri d'un succès.

En fait, elle est bien détecté : ca me donne

id:	
usb:0
description: 	Generic USB device
product: 	HYBRID-TV
vendor: 	LITEON
physical id: 	
1
bus info: 	
usb@5:1
version: 	1.00
serial: 	0000000100
capabilities: 	usb-2.00
configuration:	
maxpower	=	500mA
speed	=	480.0MB/s