Bonjour,
j'ai un switch cisco 2940 pour mes lab et j'ai effacé l'image flash par inadvertance.
Maintenant j'aimerais restaurer cette image afin de charger L'IOS pour me permettre de
configurer.Voici les messages
d'erreur que je reçois:
C2940 Boot Loader (C2940-HBOOT-M) Version 12.1(13r)AY1, RELEASE SOFTWARE (fc1)
Compiled Mon 30-Jun-03 15:16 by antonino
WS-C2940-8TT-S starting...
Base ethernet MAC Address: 00:0f:34:cc:38:40
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch: flash_init
Initializing Flash...
flashfs[0]: 81 files, 4 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7612416
flashfs[0]: Bytes used: 3005440
flashfs[0]: Bytes available: 4606976
flashfs[0]: flashfs fsck took 5 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Variable Block Filesystem (vb:) installed, fsid: 5
Setting console baud rate to 9600...
switch: load_helper
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: dir flash:
Directory of flash:/
2 -rwx 274 <date> info
3 -rwx 1910 <date> config.old
5 -rwx 2348 <date> cr.3745.lbv.ga.celtelplus.com-confg
6 drwx 128 <date> c2940-i6q4l2-mz.121-19.EA1c
86 -rwx 274 <date> info.ver
87 -rwx 760 <date> vlan.dat
4606976 bytes available (3005440 bytes used)
switch: boot flash:/c2940-i6q4l2-mz.121-19.EA1c
Loading "flash:/c2940-i6q4l2-mz.121-19.EA1c"...flash:/c2940-i6q4l2-mz.121-19.EA1c: is a directory
Error loading "flash:/c2940-i6q4l2-mz.121-19.EA1c"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
Merci de m'aider
