Nouveau "noyau" multiboot après mise a j

ça s'édite dans le fichier /boot/grub/menu.lst

si tu te sens pas de le faire, fais un copier/coller du contenu de ce fichier ici, je te le modifierai Pouet !!!
Syntaxiquement, c'est pas top, mais ça résume bien ma pensée

salut :)
on peu vérifier que vista est toujours sur ton disque:
dans le terminal tapes:

sudo fdisk -l

le"l" étant un "L"minuscule

copies/colle ici le résultat de la commande

;) amilo pi 2530 /amilo A1650G operating systems: MANDRIVA / UBUNTU / XP / VISTA

Salut à tous, le problème que je rencontre est bine celui décrit par ibtor.
Voici ci-contre mon fichier /boot/grub/menu.lst comme tu m'as demandé ibtor, et je te remercie d'avance de prendre le temps de m'aider.


# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04.1, kernel 2.6.24-19-generic
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro quiet splash
initrd /boot/initrd.img-2.6.24-19-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro single
initrd /boot/initrd.img-2.6.24-19-generic

title Ubuntu 8.04.1, kernel 2.6.22-14-generic
root (hd0,3)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
quiet

title Ubuntu 8.04.1, kernel 2.6.22-14-generic (recovery mode)
root (hd0,3)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro single
initrd /boot/initrd.img-2.6.22-14-generic

title Ubuntu 8.04.1, memtest86+
root (hd0,3)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda5
title Microsoft Windows XP Embedded
root (hd0,4)
savedefault
makeactive
chainloader +1

voilà, donc je t'ai laissé 1 ubuntu, 1 Vista et 1 XP
donc tu refais du copier/coller de ce qu'il y'a dessous et c'est bon






# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.04.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro quiet splash
initrd /boot/initrd.img-2.6.24-19-generic
quiet

#title Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
#root (hd0,3)
#kernel /boot/vmlinuz-2.6.24-19-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro single
#initrd /boot/initrd.img-2.6.24-19-generic

#title Ubuntu 8.04.1, kernel 2.6.22-14-generic
#root (hd0,3)
#kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro quiet splash
#initrd /boot/initrd.img-2.6.22-14-generic
#quiet

#title Ubuntu 8.04.1, kernel 2.6.22-14-generic (recovery mode)
#root (hd0,3)
#kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=f65f90c6-b322-4aef-863d-d1061bf35e0f ro single
#initrd /boot/initrd.img-2.6.22-14-generic

title Ubuntu 8.04.1, memtest86+
root (hd0,3)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Vista
root (hd0,1)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda5
title Windows XP
root (hd0,4)
savedefault
makeactive
chainloader +1


envie de Troller :
Mac c'est pourrite, c'est juste un PC avec BSD dessus avec u­n dessin de pomme véreuse dessus que des pigeons achètent tr­ès cher !!!

Ah désolé,j 'ai que ubuntu et vista, pas de XP. Je peux quand même modifier le fichier où tu dois changer quelque chose pour le XP ?

la dernière section (dernier paragraphe) du fichier, mets des # devant toutes les lignes envie de Troller :
Mac c'est pourrite, c'est juste un PC avec BSD dessus avec u­n dessin de pomme véreuse dessus que des pigeons achètent tr­ès cher !!!

Mouais, ça n'empêche qu'il a quand même plusieurs noyaux d'installés... autant virer les anciens non ? Intel Q6600 + Ubuntu 8.04 // Debian Lenny // Gentoo
Sous Linux, 99% des bugs se situent entre le clavier et la chaise de bureau...

Ah, c'est qu'une solution pour masquer le problème en fait ibtor ? C'est normal que linux fasse ça après une mise à jour du noyau ?