kev89
781Messages postés
15 avril 2008Date d'inscription
26 mai 2012Dernière intervention
9 mai 2008 à 18:40
Ok alors:
1er bloc note:
Titre de la fenètre: OEMSETUP
[InstallOptions]
Install_3NIC_Diag = "NO"
Install_Shortcuts = "NO"
Install_Installer = "NO"
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCI
"Jazz-Internal Bus"
ForListDo $(ToInstallList)
[Options]
3C90X
3C905
3C900
[NDDriverConstantsNDIS3]
ND3NDNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd3.sys"
ND3NDProdSWImagePath = "%SystemRoot%\System32\drivers\el90xnd3.sys"
ND3NDProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xnd3.sys"
[NDDriverConstantsNDIS4]
ND4NDNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd4.sys"
ND4NDProdSWImagePath = "%SystemRoot%\System32\drivers\el90xnd4.sys"
ND4NDProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xnd4.sys"
[BCDriverConstantsNDIS3]
ND3BCNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xbc3.sys"
ND3BCProdSWImagePath = "%SystemRoot%\System32\drivers\el90xbc3.sys"
ND3BCProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xbc3.sys"
[BCDriverConstantsNDIS4]
ND4BCNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\EL90xBC4.sys"
ND4BCProdSWImagePath = "%SystemRoot%\System32\drivers\EL90xBC4.sys"
ND4BCProdSWUpgradePath = "\SystemRoot\System32\drivers\EL90xBC4.sys"
;**************************************************************************************************
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SWType = "driver"
Exit_Code = 0
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
NetworkCardsKey = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"
FunctionTitle = "3Com 3C90x Adapter Card Setup"
3CNUMBER = "3C90X"
GROUP_NAME = "3Com EtherLink PCI NIC"
ProdHWXXXXXTitle = "3Com EtherLink PCI NIC "
ProdHWXXXXXDesc = "3Com EtherLink PCI NIC "
Manufacturer = "3Com"
EtherDiskVersion = "5.4.3"
ProdMajorVer = "1"
ProdMinorVer = "0"
ProdReview = "1"
ProdVer = $(ProdMajorVer)"."$(ProdMinorVer)
ProdSWDesc = "3Com 3C90x Adapter BC Driver"
ProdSWTitle = "3Com 3C90x Adapter BC Driver"
ProdSWName = "El90x"
NetRuleSWType = "El90xSys ndisDriver El90xDriver"
NetRuleSWUse = $(SWType)
NetRuleSWBindForm = """El90xSys"" yes no container"
NetRuleSWClass = {"El90xDriver basic"}
NetRuleSWBindable = {"El90xDriver El90xAdapter non exclusive 100"}
ProdHWName = "El90x"
NetRuleHWBindForm = " yes yes container"
NetRuleHWType = "El90x El90xAdapter"
NetRuleHWClass = {"El90xAdapter basic"}
ProdKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProdSWName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProdHWName)"\Parameters"
Hardware_Default = "HardwareDefault"
DiagExe = TCAUDIAG
NICPROP = NICPROP
DIAGCARDTYPE = "TCAUM90X"
TrayIconExe = TCAUDIAG
InstallerExe = TCAUDIAG
UnInstallerEXE = UN3C90XA
[BoomFileConstants]
NDProdSWDesc = "3Com 3C90x Adapter ND Driver"
NDProdSWTitle = "3Com 3C90x Adapter ND Driver"
NDProdSWName = "El90xnd"
NDNetRuleSWType = "El90xndSys ndisDriver El90xndDriver"
NDNetRuleSWBindForm = """El90xndSys"" yes no container"
NDNetRuleSWClass = {"El90xndDriver basic"}
NDNetRuleSWBindable = {"El90xndDriver El90xndAdapter non exclusive 100"}
NDProdHWName = "El90xnd"
NDNetRuleHWBindForm = " yes yes container"
NDNetRuleHWType = "El90xnd El90xndAdapter"
NDNetRuleHWClass = {"El90xndAdapter basic"}
NDProdKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(NDProdSWName)"\CurrentVersion"
NDParamKeyName = $(!NTN_ServiceBase)"\"$(NDProdHWName)"\Parameters"
;--------------------these NICs use old NDIS4 driver --------------------------------
ProdHW36944Title = "3Com EtherLink 10/100 PCI NIC (3C905-TX)"
ProdHW36944Desc = "3Com EtherLink 10/100 PCI NIC (3C905-TX)"
ProdHW36945Title = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)"
ProdHW36945Desc = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)"
ProdHW36864Title = "3Com EtherLink 10 PCI TPO NIC (3C900-TPO)"
ProdHW36864Desc = "3Com EtherLink 10 PCI TPO NIC (3C900-TPO)"
ProdHW36865Title = "3Com EtherLink 10 PCI Combo NIC (3C900-COMBO)"
ProdHW36865Desc = "3Com EtherLink 10 PCI Combo NIC (3C900-COMBO)"
;--------------------these NICs use new NDIS4 driver --------------------------------
ProdHW36952Title = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)"
ProdHW36952Desc = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)"
ProdHW37376NICTitle = "3Com EtherLink 10/100 PCI NIC (3C905C-TX)"
ProdHW37376NICDesc = "3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX)"
ProdHW37376MiniPCITitle= "3Com 10/100 Mini PCI Ethernet Adapter"
ProdHW37376MiniPCIDesc = "3Com 10/100 Mini PCI Ethernet Adapter"
ProdHW37376CatchAllTitle= "3Com 3C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible)"
ProdHW37376CatchAllDesc = "3Com 3C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible)"
ProdHW36949CatchAllTitle= "3Com 3C918 Integrated Fast Ethernet Controller (3C905B-TX Compatible)"
ProdHW36949CatchAllDesc = "3Com 3C918 Integrated Fast Ethernet Controller (3C905B-TX Compatible)"
ProdHW36949NICTitle = "3Com EtherLink 10/100 PCI NIC (3C905B-TX)"
ProdHW36949NICDesc = "3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)"
ProdHW36954Title = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)"
ProdHW36954Desc = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)"
ProdHW36868Title = "3Com EtherLink 10 PCI TPO NIC (3C900B-TPO)"
ProdHW36868Desc = "3Com EtherLink 10 PCI TPO NIC (3C900B-TPO)"
ProdHW36869Title = "3Com EtherLink 10 PCI Combo NIC (3C900B-COMBO)"
ProdHW36869Desc = "3Com EtherLink 10 PCI Combo NIC (3C900B-COMBO)"
ProdHW36870Title = "3Com EtherLink 10 PCI TPC NIC (3C900B-TPC)"
ProdHW36870Desc = "3Com EtherLink 10 PCI TPC NIC (3C900B-TPC)"
ProdHW36874Title = "3Com EtherLink 10 PCI Fiber NIC (3C900B-FL)"
ProdHW36874Desc = "3Com EtherLink 10 PCI Fiber NIC (3C900B-FL)"
ProdHW37377Title = "3Com 3C920B-EMB Integrated Fast Ethernet Controller"
ProdHW37377Desc = "3Com 3C920B-EMB Integrated Fast Ethernet Controller"
;---- OLD NAMES OF 90XBC NICs, THESE NAMES USED FOR CHECKING IF THE NIC ALREADY INSTALLED
OLDProdHW36944Desc = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905-TX)"
OLDProdHW36945Desc = "3Com Fast EtherLink XL 10/100Mb T4 Ethernet NIC (3C905-T4)"
OLDProdHW36949Desc = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905B-TX)"
OLDProdHW36954Desc = "3Com Fast EtherLink XL 10/100Mb FX Ethernet NIC (3C905B-FX)"
OLDProdHW36864Desc = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900-TPO)"
OLDProdHW36865Desc = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900-COMBO)"
OLDProdHW36868Desc = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900B-TPO)"
OLDProdHW36869Desc = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900B-COMBO)"
OLDProdHW36870Desc = "3Com EtherLink XL TPC 10Mb Ethernet NIC (3C900B-TPC)"
OLDProdHW36874Desc = "3Com EtherLink XL FL 10Mb Ethernet NIC (3C900B-FL)"
OLDProdHW36952Desc = "3Com EtherLink XL COMBO 10/100Mb Ethernet NIC (3C905B-COMBO)"
; EtherDisk5.0 have diff. desc. for 10Mb cards, so we need to check that, too.
ED50HW36868Desc = "3Com EtherLink PCI TPO NIC (3C900B-TPO)"
ED50HW36864Desc = "3Com EtherLink PCI TPO NIC (3C900-TPO)"
ED50HW36865Desc = "3Com EtherLink PCI Combo NIC (3C900-COMBO)"
ED50HW36869Desc = "3Com EtherLink PCI Combo NIC (3C900B-COMBO)"
ED50HW36870Desc = "3Com EtherLink PCI TPC NIC (3C900B-TPC)"
ED50HW36874Desc = "3Com EtherLink PCI Fiber NIC (3C900B-FL)"
;------------------------------------------------------------------------------------------------
; List of NICs
CFIDList = {36944, 36945, 36864, 36865,36868, 36869, 36870, 36874, 36949, 36952, 36954, 37376, 37377}
AdapterType = 5
NT4_CFG = NT4_CFG
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
NT400VersionConstant = "(4.0)"
INF_PROCESSER = "I386"
enum = "enum"
int = "int"
long = "long"
disable = "DISABLE"
enable = "ENABLE"
disable_value = "DISABLE"
enable_value = "ENABLE"
basic = "Basic"
enhanced = "Enhanced"
media_select = "Media Select"
media_auto = "Auto-Negotiate"
media_10_full = "10 Mbps, Full-Duplex"
media_10_half = "10 Mbps, Half-Duplex"
media_100_full = "100 Mbps, Full-Duplex"
media_100_half = "100 Mbps, Half-Duplex"
media_default = "Hardware Default"
flow_control = "Flow Control"
rom_boot = "ROMBoot"
self_healing = "Self Healing"
num_tx_entries = "Descriptors: Transmit"
num_rx_entries = "Descriptors: Receive"
ipsec_offload = "Offload: IPSec"
tcpseg_offload = "Offload: TCP Segmentation"
checksum_offload = "Offload: IP Checksum"
vlan_offload = "Offload: 802.1p"
GenTxThreshold = "Transmit broadcast limiting"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[checkFileExist]
DiagFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\tcaudiag.exe"
[DiagRegistry]
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY
OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
ifstr $(COMKEY) == ""
CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
endif
OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) TCAUDIAGKEY
ifstr $(TCAUDIAGKEY) == ""
CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUDIAGKEY
endif
OpenRegKey $(TCAUDIAGKEY) "" "TCAUM90X" $(!REG_KEY_WRITE) TCAUM90XKEY
ifstr $(TCAUM90XKEY) == ""
CreateRegKey $(TCAUDIAGKEY) {"TCAUM90X", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUM90XKEY
endif
SetRegValue $(TCAUM90XKEY) {"DriverNames", 0, $(!REG_VT_SZ), "3C90X.COM;EL90X.DOS;SYSTEM\EL90XND3.SYS;SYSTEM\EL90XND4.SYS;SYSTEM\EL90XBC4.SYS"}
OpenRegKey $(TCAUM90XKEY) "" "Extensions" $(!REG_KEY_WRITE) ExtensionsKEY
ifstr $(ExtensionsKEY) == ""
CreateRegKey $(TCAUM90XKEY) {"Extensions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtensionsKEY
endif
OpenRegKey $(ExtensionsKEY) "" "DA" $(!REG_KEY_WRITE) DAKEY
ifstr $(DAKEY) == ""
CreateRegKey $(ExtensionsKEY) {"DA", 0, GenericClass} "" $(!REG_KEY_WRITE) "" DAKEY
endif
CloseRegKey $(SOFTKEY)
CloseRegKey $(COMKEY)
CloseRegKey $(TCAUDIAGKEY)
CloseRegKey $(TCAUM90XKEY)
CloseRegKey $(ExtensionsKEY)
CloseRegKey $(DAKEY)
return
[InstallOption]
set CurrLang = $($0)
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms InstallOptions
read-syms GeneralConstants
read-syms FileConstants
read-syms BoomFileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
;*********** add this to check correct platform supported********
ifstr(i) $(!STF_PLATFORM) == "Alpha"
set CommonStatus = STATUS_USERCANCEL
goto end
else-ifstr(i) $(!STF_PLATFORM) == "Alpha_AXP"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
;*****************************************************************
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) : WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set NDIS_VER = NDIS4
else
set NDIS_VER = NDIS3
endif
read-syms BCDriverConstants$(NDIS_VER)
read-syms NDDriverConstants$(NDIS_VER)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant)
Debug-Output "$(InfFile) : Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
ifstr $(!STF_PLATFORM) == $(INF_PROCESSER)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\TCAUM90X" $(!REG_KEY_READ) TCAUDIAGKEY
ifstr $(TCAUDIAGKEY) != ""
detect checkFileExist
set Diag = *($(DiagFound), 1)
ifstr(i) $(Diag) == "tcaudiag.exe"
; UN-Block the spawning of TD-Diags upon the "Properties" event in the NCP
StartDetachedProcess ExitCode "Windows Directory" "" $(DiagExe).EXE
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(!REG_KEY_ALL_ACCESS) NICKey
Ifstr(i) $(NICKey) != "" ; key exists
GetRegValue $(NICKey) "ServiceName" ServiceNameList
;Determine the Service Name and put in var NICServiceName
set NICServiceName = *($(ServiceNameList), 4)
endif
CloseRegKey $(NICKey)
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Command Line parameter is -ServiceName_"$(NICServiceName)""
;"Windows Directory" being the system32 dir
RunProgram ExitCode "Windows Directory" "" $(NT4_CFG).EXE -ServiceName_$(NICServiceName)
; RunProgram ExitCode "Windows Directory" "" $(InstallerExe).EXE
set CommonStatus = STATUS_USERCANCEL
goto end
;StartDetachedProcess ExitCode "Windows Directory" "" NT4_CFG.EXE $(!NTN_RegBase)
endif
CloseRegKey $(TCAUDIAGKEY)
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(!REG_KEY_ALL_ACCESS) NICKey
Ifstr(i) $(NICKey) != "" ; key exists
GetRegValue $(NICKey) "ServiceName" ServiceNameList
;Determine the Service Name and put in var NICServiceName
set NICServiceName = *($(ServiceNameList), 4)
endif
CloseRegKey $(NICKey)
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Command Line parameter is -ServiceName_"$(NICServiceName)""
;"Windows Directory" being the system32 dir
RunProgram ExitCode "Windows Directory" "" $(NT4_CFG).EXE -ServiceName_$(NICServiceName)
; RunProgram ExitCode "Windows Directory" "" $(InstallerExe).EXE
set CommonStatus = STATUS_USERCANCEL
goto end
StartDetachedProcess ExitCode "Windows Directory" "" NT4_CFG.EXE $(!NTN_RegBase)
endif
set CommonStatus = STATUS_USERCANCEL
goto end
else
set StartLabel = configureadapter
endif
else-Ifstr(i) $(ProdKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else-Ifstr(i) $(NDProdKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "$(InfFile) : =================================================="
Debug-Output "$(InfFile) : STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "$(InfFile) : STF_SRCDIR is: "$(!STF_SRCDIR)
Debug-Output "$(InfFile) : STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "$(InfFile) : Option is: "$(Option)
Debug-Output "$(InfFile) : !STF_NCN_InstallMode is:"$(!NTN_InstallMode)
Debug-Output "$(InfFile) : !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "$(InfFile) : !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "$(InfFile) : !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "$(InfFile) : !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "$(InfFile) : !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED)
Debug-Output "$(InfFile) : !STF_BusType is $(!STF_BUSTYPE)"
Debug-Output "$(InfFile) : !STF_BusTypeList is $(!STF_BUSTYPELIST)"
Debug-Output "$(InfFile) : =================================================="
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Debug-Output "$(InfFile) : Installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProdKeyName) $(!REG_KEY_READ) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProdKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;********* add this because of 2 service names *******************************
OpenRegKey $(!REG_H_LOCAL) "" $(NDProdKeyName) $(!REG_KEY_READ) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(NDProdKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
set OldVersionExisted = $(TRUE)
endif
Endif
;*****************************************************************************
;;;set OldVersionExisted = $(TRUE)
endif
Endif
Goto adapteroptions
configureadapter = +
Debug-Output "$(InfFile) : Configureadapter"
set Error = "Cannot configure the software component"
goto fatal
adapteroptions = +
Debug-Output "$(InfFile) : Adapteroptions"
set from = adapteroptions
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
install "Install-OTHER"
Debug-Output "$(InfFile) : installproduct"
StartWait
set AdapterList = $($R1)
Debug-Output "$(InfFile) : About to look for 3Com PCI Cards"
set TargetVersion = *($(CurrentVersionValue),4)
Debug-Output "$(InfFile) : Current Version:"$(TargetVersion)
ifstr $(TargetVersion) == $(NT350VersionConstant)
Debug-Output "Running on WindowsNT 3.50"
set Version350 = $(TRUE)
else
Debug-Output "Running on WindowsNT 3.51 or higher"
set Version350 = $(FALSE)
endif
ifint $(Version350) == $(TRUE)
Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"
ifstr $(!STF_GUI_UNATTENDED) == "YES"
Debug-Output "$(InfFile) : Running in GUI unattended mode"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 5
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
set NTDetected = $(FALSE)
set AdapterList = {{$(Option),0, XXXXX}}
Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
else ;;; GUI_UNATTENDED=NO
Debug-Output "$(InfFile) : Running 3.50 Bus Dialog"
set BusInterfaceType = 5
set BusNumber = 0
set NTDetected = $(FALSE)
Shell $(UtilityInf),GetBusTypeDialog,$(ProdHWXXXXXDesc) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
set AdapterList = {{$(Option),0, XXXXX}}
Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
endif ;;; end check GUI_UNATTENDED
else ;;; Version350=FALSE
Debug-Output "$(InfFile) : Running 3.51 or higher using PCI Dectection"
set NTDetected = $(TRUE)
set Vendor = 4279
set CFIDList = $(CFIDList)
Debug-Output "$(InfFile) : VendorID = $(Vendor)"
Debug-Output "$(InfFile) : CFIDList = $(CFIDList)"
set AdapterList = {}
ForListDo $(CFIDList)
set-div CFID = $($) 1
set DeviceID = $($)
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ForListDo $($R0)
set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)})
EndForListDo
EndForListDo
ifstr(i) $(AdapterList) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
endif
set ToInstallList = {}
Debug-Output "$(InfFile) : Adapterlist = $(AdatperList)"
ForListDo $(AdapterList)
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
set DeviceID = *($($),3)
; 1.) Call Executable to populate the reg key "SOFTWARE\3Com\PCI_DATA" with the PCI data the current instance of the NIC
RunProgram ExitCode "" "" $(SrcDir)PCI_DATA.EXE /$(DetectedBusNum) /$(DetectedSlotNum)
; 2.) Check open key for the data of interest. *** DeviceID, SubSystemID, SubVendorID, and VendorID are present
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\PCI_DATA" $(!REG_KEY_ALL_ACCESS) PCI_DATA_KEY
GetRegValue $(PCI_DATA_KEY) "DeviceID" Array_DeviceID
GetRegValue $(PCI_DATA_KEY) "VendorID" Array_VendorID
GetRegValue $(PCI_DATA_KEY) "SubSystemID" Array_SubSystemID
GetRegValue $(PCI_DATA_KEY) "SubVendorID" Array_SubVendorID
Set Value_DeviceID = *($(Array_DeviceID),4)
Set Value_VendorID = *($(Array_VendorID),4)
Set Value_SubSystemID = *($(Array_SubSystemID),4)
Set Value_SubVendorID = *($(Array_SubVendorID),4)
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected DeviceID is ("$(Value_DeviceID)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected VendorID is ("$(Value_VendorID)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected SubSystemID is ("$(Value_SubSystemID)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected SubVendorID is ("$(Value_SubVendorID)")"
; 3.) Stepthrough logic to determine card type
; 3Com Product
ifstr(i) $(Value_VendorID) == "10B7"
; 3C905C NIC / Mini PCI NIC
; 3C905C (NIC) ********************************************************
ifstr(i) $(Value_DeviceID) == "9200"
ifstr(i) $(Value_SubSystemID) == "1000"
ifstr(i) $(Value_SubVendorID) == "10B7"
; Only in this circumstance is it a 3Com NIC
; Vendor and SubVendor ID = 10B7 so it's not a LOM
; SubSystem ID IS NOT(!) a duplicate of Device ID
set DeviceID = 37376NIC
endif
endif
endif
; 3C905C (Mini PCI NIC) ***********************************************
ifstr(i) $(Value_DeviceID) == "9200"
ifstr(i) $(Value_SubSystemID) == "7000"
ifstr(i) $(Value_SubVendorID) == "10B7"
; Only in this circumstance is it a 3Com NIC
; Vendor and SubVendor ID = 10B7 so it's not a LOM
; SubSystem ID IS NOT(!) a duplicate of Device ID
set DeviceID = 37376MiniPCI
endif
endif
endif
; 3C905 Catch All *****************************************************
ifstr(i) $(Value_DeviceID) == "9200"
; *** The DeviceID is 9200 ***
; *** The Vendor ID is 10B7 (3Com) but the SubVendorID IS NOT ***
; *** You're in an OEM situation. Break out of this iteration fo the Loop ***
; *** SubSystemID is a don't care value. OEMs can assign this to ANYTHING ***
ifstr(i) $(Value_SubVendorID) != "10B7"
set DeviceID = 37376CatchAll
endif
endif
; 3C905B (NIC) ******************************************************
ifstr(i) $(Value_DeviceID) == "9055"
ifstr(i) $(Value_SubSystemID) == "9055"
ifstr(i) $(Value_SubVendorID) == "10B7"
; Only in this circumstance is it a 3Com NIC
; Vendor and SubVendor ID = 10B7 so it's not a LOM
; SubSystem ID IS a duplicate of Device ID
set DeviceID = 36949NIC
endif
endif
endif
; 3C918 (LOM NIC) ****************************************************
ifstr(i) $(Value_DeviceID) == "9055"
; *** The DeviceID is 9055 ***
; *** The Vendor ID is 10B7 (3Com) but the SubVendorID IS NOT ***
; *** You're in an OEM situation.
; *** SubSystemID is a don't care value. OEMs can assign this to ANYTHING ***
ifstr(i) $(Value_SubVendorID) != "10B7"
set DeviceID = 36949CatchAll
endif
endif
endif
CloseRegKey $(PCI_DATA_KEY)
Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"
;**************** add this because of 2 Service names**************
set BoomCard = FALSE
ifstr(i) $(DeviceID) == "36944"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36945"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36864"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36865"
set BoomCard = TRUE
endif
ifstr(i) $(BoomCard) == TRUE
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProdHW$(DeviceID)Desc), "El90xnd"
ifstr(i) $($R1) != "YES"
goto AddToNotList
else
goto endchecking
endif
;we don't have to check old names for Boomerang because we don't allow update on Boomerang
;Update only allowed if Boom card has used new service name El90xnd.
;Ed5.0 and anything before that didn't use service name El90xnd.
else ; 90xBC CARD
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProdHW$(DeviceID)Desc), "El90x"
;**** DO THIS BECAUSE WE NOW USE NEW NAMES FOR OUR CARDS, CHECK OLD NAME
ifstr(i) $($R1) != "YES" ;not installed yet, not sure, check oldnames
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(OLDProdHW$(DeviceID)Desc), "El90x"
ifstr(i) $($R1) != "YES" ;not installed yet, still not sure because we changed desc twice before
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ED50HW$(DeviceID)Desc), "El90x"
ifstr(i) $($R1) != "YES" ;not installed yet, sure by now
goto AddToNotList
else ;already installed with old name on ED5.0
goto endchecking
endif
else ;already installed with old name on ED4.0 or before that
goto endchecking
endif
else ;already installed with current name on ECD5.1
goto endchecking
endif
endif
AddToNotList=+
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
;ifstr(i) $(ToInstallList) == {} ; COMMENT THIS OUT TO INSTALL MULTIPLE NIC at a time
ifstr(i) $($R1) != "YES"
set ToInstallList = >($(ToInstallList), $($))
endif
;endif
endchecking =+
endif
EndForListDo
ifstr(i) $(ToInstallList) == {}
set Error = $(CANNOT_FIND_ANY_UNINSTALLED_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
ForListDo $(ToInstallList)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
set DeviceID = *($($),3)
set BoomDetected = FALSE
set NonBoomDetected = FALSE
; 1.) Call Executable to populate the reg key "SOFTWARE\3Com\PCI_DATA" with the PCI data the current instance of the NIC
RunProgram ExitCode "" "" $(SrcDir)PCI_DATA.EXE /$(DetectedBusNum) /$(DetectedSlotNum)
; 2.) Check open key for the data of interest. *** DeviceID, SubSystemID, SubVendorID, and VendorID are present
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\PCI_DATA" $(!REG_KEY_ALL_ACCESS) PCI_DATA_KEY
GetRegValue $(PCI_DATA_KEY) "DeviceID" Array_DeviceID
GetRegValue $(PCI_DATA_KEY) "VendorID" Array_VendorID
GetRegValue $(PCI_DATA_KEY) "SubSystemID" Array_SubSystemID
GetRegValue $(PCI_DATA_KEY) "SubVendorID" Array_SubVendorID
Set Value_DeviceID = *($(Array_DeviceID),4)
Set Value_VendorID = *($(Array_VendorID),4)
Set Value_SubSystemID = *($(Array_SubSystemID),4)
Set Value_SubVendorID = *($(Array_SubVendorID),4)
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected DeviceID is ("$(Value_DeviceID)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected VendorID is ("$(Value_VendorID)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected SubSystemID is ("$(Value_SubSystemID)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "The detected SubVendorID is ("$(Value_SubVendorID)")"
; 3.) Stepthrough logic to determine card type
; 3Com Product
ifstr(i) $(Value_VendorID) == "10B7"
; 3C905C NIC / Mini PCI NIC
; 3C905C (NIC) ********************************************************
ifstr(i) $(Value_DeviceID) == "9200"
ifstr(i) $(Value_SubSystemID) == "1000"
ifstr(i) $(Value_SubVendorID) == "10B7"
; Only in this circumstance is it a 3Com NIC
; Vendor and SubVendor ID = 10B7 so it's not a LOM
; SubSystem ID IS NOT(!) a duplicate of Device ID
set DeviceID = 37376NIC
endif
endif
endif
; 3C905C (Mini PCI NIC) ***********************************************
ifstr(i) $(Value_DeviceID) == "9200"
ifstr(i) $(Value_SubSystemID) == "7000"
ifstr(i) $(Value_SubVendorID) == "10B7"
; Only in this circumstance is it a 3Com NIC
; Vendor and SubVendor ID = 10B7 so it's not a LOM
; SubSystem ID IS NOT(!) a duplicate of Device ID
set DeviceID = 37376MiniPCI
endif
endif
endif
; 3C905 Catch All *****************************************************
ifstr(i) $(Value_DeviceID) == "9200"
; *** The DeviceID is 9200 ***
; *** The Vendor ID is 10B7 (3Com) but the SubVendorID IS NOT ***
; *** You're in an OEM situation. Break out of this iteration fo the Loop ***
; *** SubSystemID is a don't care value. OEMs can assign this to ANYTHING ***
ifstr(i) $(Value_SubVendorID) != "10B7"
set DeviceID = 37376CatchAll
endif
endif
; 3C905B (NIC) ******************************************************
ifstr(i) $(Value_DeviceID) == "9055"
ifstr(i) $(Value_SubSystemID) == "9055"
ifstr(i) $(Value_SubVendorID) == "10B7"
; Only in this circumstance is it a 3Com NIC
; Vendor and SubVendor ID = 10B7 so it's not a LOM
; SubSystem ID IS a duplicate of Device ID
set DeviceID = 36949NIC
endif
endif
endif
; 3C918 Catch All ****************************************************
ifstr(i) $(Value_DeviceID) == "9055"
; *** The DeviceID is 9055 ***
; *** The Vendor ID is 10B7 (3Com) but the SubVendorID IS NOT ***
; *** You're in an OEM situation.
; *** SubSystemID is a don't care value. OEMs can assign this to ANYTHING ***
ifstr(i) $(Value_SubVendorID) != "10B7"
set DeviceID = 36949CatchAll
endif
endif
endif
CloseRegKey $(PCI_DATA_KEY)
;********************************************************************
; Check if 90XBC or Boomerang
;********************************************************************
set BoomCard = FALSE
ifstr(i) $(DeviceID) == "36944"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36945"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36864"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36865"
set BoomCard = TRUE
endif
ifstr(i) $(BoomCard) == TRUE
set CorrectProdHWName = $(NDProdHWName)
set CorrectProdSWName = $(NDProdSWName)
set CorrectNetRuleSWType = $(NDNetRuleSWType)
set CorrectNetRuleSWBindForm = $(NDNetRuleSWBindForm)
set CorrectNetRuleSWClass = $(NDNetRuleSWClass)
set CorrectNetRuleSWBindable = $(NDNetRuleSWBindable)
set CorrectNetRuleHWBindForm = $(NDNetRuleHWBindForm)
set CorrectNetRuleHWType = $(NDNetRuleHWType)
set CorrectNetRuleHWClass = $(NDNetRuleHWClass)
set CorrectProdKeyName = $(NDProdKeyName)
set CorrectParamKeyName = $(NDParamKeyName)
set CorrectProdSWDesc = $(NDProdSWDesc)
set CorrectProdSWTitle = $(NDProdSWTitle)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set CorrectNetEventDLL = $(ND4NDNetEventDLL)
set CorrectProdSWImagePath = $(ND4NDProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND4NDProdSWUpgradePath)
else
set CorrectNetEventDLL = $(ND3NDNetEventDLL)
set CorrectProdSWImagePath = $(ND3NDProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND3NDProdSWUpgradePath)
endif
else ; 90XBC CARD
set CorrectProdSWDesc = $(ProdSWDesc)
set CorrectProdSWTitle = $(ProdSWTitle)
set CorrectProdHWName = $(ProdHWName)
set CorrectProdSWName = $(ProdSWName)
set CorrectNetRuleSWType = $(NetRuleSWType)
set CorrectNetRuleSWBindForm = $(NetRuleSWBindForm)
set CorrectNetRuleSWClass = $(NetRuleSWClass)
set CorrectNetRuleSWBindable = $(NetRuleSWBindable)
set CorrectNetRuleHWBindForm = $(NetRuleHWBindForm)
set CorrectNetRuleHWType = $(NetRuleHWType)
set CorrectNetRuleHWClass = $(NetRuleHWClass)
set CorrectProdKeyName = $(ProdKeyName)
set CorrectParamKeyName = $(ParamKeyName)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set CorrectNetEventDLL = $(ND4BCNetEventDLL)
set CorrectProdSWImagePath = $(ND4BCProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND4BCProdSWUpgradePath)
else
set CorrectNetEventDLL = $(ND3BCNetEventDLL)
set CorrectProdSWImagePath = $(ND3BCProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND3BCProdSWUpgradePath)
endif
endif ; END CHECK CARD
;DEBUG:
; ifstr(i) $(BoomCard) == TRUE
; Set DlgText = "bOOM CARD"
; else
; Set DlgText = "90xbc CARD"
; endif
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
; Set DlgText = "firstDB "$(CorrectProdHWName)" "$(CorrectProdSWName)
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
; Set DlgText = $(CorrectProdKeyName)" "$(CorrectProdSWImagePath)
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
; Set DlgText = "Netevent "$(CorrectNetEventDLL)
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
;END DEBUG
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_READ) KeyNt
CloseRegKey $(KeyNt)
Ifstr(i) $(KeyNt) == "" ; Begin check Key=null
Debug-Output "$(InfFile) : AddSoftwareComponent"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(CorrectProdSWName), +
$(CorrectProdSWName), +
$(CorrectProdSWTitle), $(STF_CONTEXTINFNAME), +
$(CorrectProdSWImagePath), "kernel", "NDIS", {}, "",+
$(CorrectNetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
;DEBUG:
; ifstr(i) $(BoomCard) == TRUE
; Set DlgText = "bOOM CARD"
; else
; Set DlgText = "90xbc CARD"
; endif
; Shell "Done Add Software comp to get keyhandle"
; Set DlgText = "firstDB "$(CorrectProdHWName)" "$(CorrectProdSWName)
;END DEBUG
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SWType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMajorVer)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMinorVer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWDesc)},+
{Review,$(NoTitle),$(!REG_VT_DWORD),$(ProdReview)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleSWType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSWUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleSWBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleSWClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
;********** Add parameter for driver *************************
set WakeOnLan = YES
set WakeOnLink = NO
set ValueEnable = ENABLE
ifstr(i) $(BoomCard) == TRUE
Set NewValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
else
Set NewValueList = {{RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)},+
{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
endif
Shell $(UtilityInf), AddValueList, $(SoftParameterKey), $(NewValueList)
CreateRegKey $(SoftParameterKey) {"3CDefault" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
"" KeyNt2
;;;
Set ThisValueList = {RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(NDProdSWName) $(!REG_KEY_ALL_ACCESS) NDKeyNt
ifstr $(KeyNt2) != ""
SetRegValue $(KeyNt2 ) $("ThisValueList")
CloseRegKey $(KeyNt2 )
endif
;;;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
;*************************************************************
endif ; end check Key=null
Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"
Debug-Output "$(InfFile) : Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(CorrectProdHWName),$(STF_CONTEXTINFNAME),$(CorrectProdKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProdHW$(DeviceID)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProdHW$(DeviceID)Desc)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdHWName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)},+
}
; Workaround: Sometimes AddHardwareComponent can't return correct handle for HardNetCardKey
; We have to manually open the key using adapter number returned from AddHardwareComponent
; might have to do the same for HardParameterKey
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$($R4) $(!REG_KEY_SET_VALUE) HardNetCardKey
; end workaround
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;set RegistryErrorIndex = $($R0)
;Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
;EndWait
;goto fatalregistry
;endif
set BusTypeNum = 5
ifstr(i) $(DeviceID) == "36944"
set CardType = 0
else-ifstr(i) $(DeviceID) == "36945"
set CardType = 0
else-ifstr(i) $(DeviceID) == "36949"
set CardType = 0
else
set CardType = 2
endif
ifint $(NTDetected) == $(TRUE)
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
set BusInterfaceType = $(BusTypeNum)
set WakeOnLan = YES
set WakeOnLink = NO
set FlowControl = ENABLE
;
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
{FlowControl,$(NoTitle),$(!REG_VT_SZ),$(FlowControl)},+
{DownPollRate,$(NoTitle),$(!REG_VT_SZ),"8"},+
{NDIS_VERSION,$(NoTitle),$(!REG_VT_SZ),"NDIS 4"},+
{8021pOffload,$(NoTitle),$(!REG_VT_SZ),"DISABLE"},+
{RxChecksum,$(NoTitle),$(!REG_VT_SZ),"DISABLE"},+
{TxChecksum,$(NoTitle),$(!REG_VT_SZ),"DISABLE"},+
{RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),"ENABLE"},+
{InitDelayCount,$(NoTitle),$(!REG_VT_SZ),"0"},+
{DoubleNego,$(NoTitle),$(!REG_VT_SZ),"ENABLE"},+
{PHYCompat,$(NoTitle),$(!REG_VT_SZ),"ENABLE"},+
{LnkChk,$(NoTitle),$(!REG_VT_SZ),"DISABLE"},+
{RWUPING,$(NoTitle),$(!REG_VT_SZ),"DISABLE"},+
{RWUARP,$(NoTitle),$(!REG_VT_SZ),"DISABLE"},+
}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY
OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
; If the 3Com Key doesn't exists, create one.
ifstr $(COMKEY) == ""
CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
endif
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(!REG_KEY_ALL_ACCESS) ServicesKey
Ifstr(i) $(ServicesKey) != "" ; key exists
EnumRegKey $(ServicesKey) DriverList
ForListDo $(DriverList)
; *** Check whether any EL99X driver instances are present. This is a NIC project specific check!
set foundPythonInstance = FALSE
set Driver = *($($), 1)
Split-String "$(Driver)" "X" DriverTokens
set DriverName = *($(DriverTokens), 1)
ifstr(i) $(Driver) != "EL90X"
ifstr(i) $(DriverName) == "El90"
; We have found a 3Com client-related key
set found3ComClientInstance = TRUE
endif
endif
Split-String "$(Driver)" "x" DriverTokens
set DriverName = *($(DriverTokens), 1)
ifstr(i) $(Driver) != "EL90x"
ifstr(i) $(DriverName) == "El90"
; We have found a 3Com client-related key
set found3ComClientInstance = TRUE
endif
endif
; *** Create a key with a cooresponding service name under the SOFTWARE\3Com key.
Ifstr(i) $(found3ComClientInstance) == "TRUE"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Found Typhoon Driver instance ("$(DriverName)")"
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Driver instance name is ("$(Driver)")"
CreateRegKey $(COMKEY) {$(Driver), 0, GenericClass} "" $(!REG_KEY_WRITE) "" THISNIC
endif
; *************************************************************************************************
; *************************************************************************************************
; NT4_CFG
;
; INSTRUCTIONS
;
; HKEY_LOCAL_MACHINE\SOFTWARE\3Com\B A S E K E Y
;
;Under the BASEKEY we'll have ALL of the NIC parameters the driver supports under the Windows NT 4
;operating system.
;
;e.g.
;
;HKEY_LOCAL_MACHINE\SOFTWARE\3Com\EL99X\F L O W C O N T R O L
;
;Where EL99x is the BASEKEY. Under the parameter you'll find a subkey that determines the type of information
;tobe/nottobe displayed. Legal subkey types are "enum","single value","protected", and "range"
;
;enum: Every Value under this key will be displayed in a listbox. User selections and changes
; will be based upon those value/data combinations exposed under the enum key.
;
;single value: 1 value is expected. The 1st value present that isn't "Default" will be shown. This
; value can be changed at the user's request.
;
;protected: 1 value is expected. Said value will be shown but can not be changed by the user.
;
;range: Programmatically a value will be shown. It will be incremented/decremented based
; on Windows 2000 type /enum data exposed under this key
;
; *************************************************************************************************
; *************************************************************************************************
Ifstr(i) $(found3ComClientInstance) == "TRUE"
;BEGIN PARAMETERS LIST
; *************************************************************************************************
; *** 8021pOffload (DATATYPE ENUM) ***
CreateRegKey $(THISNIC) {"8021pOffload", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_8021pOffload
SetRegValue $(KEY_8021pOffload),{FriendlyName,$(NoTitle),$(!REG_VT_SZ), "802.1p Support" }
CreateRegKey $(KEY_8021pOffload) {"enum", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_ENUM
Set ThisValueList = {{$(enable_value),$(NoTitle),$(!REG_VT_SZ),$(enable)},+
{$(disable_value),$(NoTitle),$(!REG_VT_SZ),$(disable)},+
}
Shell $(UtilityInf), AddValueList, $(KEY_ENUM), $(ThisValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; *************************************************************************************************
; *** DownPollRate (DATATYPE enum) ***
CreateRegKey $(THISNIC) {"DownPollRate", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_DownPollRate
SetRegValue $(KEY_DownPollRate),{FriendlyName,$(NoTitle),$(!REG_VT_SZ), "Down Poll Rate"}
CreateRegKey $(KEY_DownPollRate) {"enum", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_ENUM
Set ThisValueList = {{8,$(NoTitle),$(!REG_VT_SZ),"8"},+
{64,$(NoTitle),$(!REG_VT_SZ),"64"},+
}
Shell $(UtilityInf), AddValueList, $(KEY_ENUM), $(ThisValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; *************************************************************************************************
; *** FlowControl (DATATYPE ENUM) ***
CreateRegKey $(THISNIC) {"FlowControl", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_FlowControl
SetRegValue $(KEY_FlowControl),{FriendlyName,$(NoTitle),$(!REG_VT_SZ), "Flow Control" }
CreateRegKey $(KEY_FlowControl) {"enum", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_ENUM
Set ThisValueList = {{$(enable_value),$(NoTitle),$(!REG_VT_SZ),$(enable)},+
{$(disable_value),$(NoTitle),$(!REG_VT_SZ),$(disable)},+
}
Shell $(UtilityInf), AddValueList, $(KEY_ENUM), $(ThisValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; *************************************************************************************************
; *** Media (DATATYPE ENUM) ***
CreateRegKey $(THISNIC) {"media_type", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_XCVR_SELECT
SetRegValue $(KEY_XCVR_SELECT),{FriendlyName,$(NoTitle),$(!REG_VT_SZ), "Media Type" }
CreateRegKey $(KEY_XCVR_SELECT) {"enum", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_ENUM
Set ThisValueList = {{AUTOSELECT,$(NoTitle),$(!REG_VT_SZ),$(media_auto)},+
{10HALF,$(NoTitle),$(!REG_VT_SZ),$(media_10_half)},+
{100HALF,$(NoTitle),$(!REG_VT_SZ),$(media_100_half)},+
{10FULL,$(NoTitle),$(!REG_VT_SZ),$(media_10_full)},+
{100FULL,$(NoTitle),$(!REG_VT_SZ),$(media_100_full)},+
{HWDEFAULT,$(NoTitle),$(!REG_VT_SZ),$(media_default)},+
}
Shell $(UtilityInf), AddValueList, $(KEY_ENUM), $(ThisValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; *************************************************************************************************
; *** RxChecksum ***
CreateRegKey $(THISNIC) {"RxChecksum", 0, GenericClass} "" $(!REG_KEY_WRITE) "" KEY_RxChecksum
SetRegValue $(KEY_RxChecksum),{FriendlyName,$(NoTitle),$(!REG_VT_SZ
