Bonsoir,
desole du retard, j'ai enfin trouver une source qui m'a permis d'avoir enfin du reseau sans fil, c'est génial, seulement cette source est en anglais, je n'ai plus l'adresse web, mais en revanche j'avais copier ce qui y etait indiquer, j'espere que ca vous aidera dans votre probleme



Make sure you use the appropriate version of the drivers for your version of Linux. If you're using a 64-bit version of Linux, you must use 64-bit drivers. You can check this using the following command:
Code:

getconf LONG_BIT

I personally recommend using the wicd program for WiFi connectivity. It boasts built-in WPA support and has been successful where other network connection manager programs have failed.


This chipset showed up on my Acer Aspire 5050-3785. The lspci program spit out the following info:
Code:

Atheros Unknown device 001c (rev 01)

It also has been incorrectly labeled as an AR5006X device, in some cases.

Here is a step by step procedure to install the drivers manually (in case you don't want to use the script I wrote, or if it doesn't work properly). Open a terminal and copy/paste the following lines:

1a. Download the ndiswrapper source code and AR5007EG Windows drivers:
Code:

http://wifix.sourceforge.net/software.php?title=ndiswrapper

1b. Download the AR5006EG Windows XP drivers:

2. Extract the archives:
Code:

tar xvf ar5007eg-*.tar.gz
tar xvf ndiswrapper-newest.tar.gz

3. Ensure you have your kernel headers and the build essential package.
Code:

sudo aptitude update && sudo aptitude install linux-headers-$(uname -r) build-essential

4. Blacklist the ath_pci kernel module (it doesn't support our chipset).
Code:

echo "blacklist ath_pci" | sudo tee -a /etc/modprobe.d/blacklist

5. Compile ndiswrapper:
Code:

pushd ndiswrapper-*/
sudo make uninstall
make
sudo make install
popd

6. Install the Windows drivers (using ndiswrapper):
Code:

pushd */ar5006eg/
sudo ndiswrapper -i net5211.inf
popd

7. Make sure ndiswrapper loads up every time we start Linux:
Code:

sudo modprobe ndiswrapper
echo "ndiswrapper" | sudo tee -a /etc/modules

8. Restart your computer.
Code:

sudo init 6