Je souhaite installer un routeur Cisco 2901 derrière une livebox
Livebox IP 192.168.0.1
PCTest IP 1921.68.0.10
R Cisco IP 192.168.0.254
R Cisco IP 192.168.1.1 (Interface 2)
MonPC IP 192.168.1.10
Actuellement mon PC présent sur l'IP 192.168.1.10 (LAN Cisco) peut accéder au réseau 192.168.0.0 (LAN Livebox) et peut ping la livebox ou le PCTest.
Mais impossible pour mon PC d'accéder à un site externe (google.fr par exemple)
Auriez-vous une idée pour debug mon réseau ?
Merci beaucoup :)
Voici ma configuration:
Format Pastebin: http://pastebin.com/Ui2kCEb9
Building configuration...
Current configuration : 1564 bytes ! ! Last configuration change at 12:15:48 UTC Fri Aug 8 2014 ! NVRAM config last updated at 12:15:54 UTC Fri Aug 8 2014 ! NVRAM config last updated at 12:15:54 UTC Fri Aug 8 2014 version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ! no ipv6 cef ! ! ! ! ip dhcp pool test network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 domain-name test ! ip dhcp pool MonPC host 192.168.1.10 255.255.255.0 client-identifier 0145.4105.4880.4c exit ! ip cef multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! ! ! ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.254 255.255.255.0 ip nat outside ip virtual-reassembly in duplex auto speed auto ! interface GigabitEthernet0/1 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 2 interface GigabitEthernet0/0 overload ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 ! access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! control-plane ! ! ! line con 0 logging synchronous line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 login transport input all ! scheduler allocate 20000 1000 end