Erreur MOM.implementation

Fermé
annick - 25 avril 2007 à 09:22
 toph - 19 juil. 2012 à 18:56
Bonjour
Je viens de mettre à jour le pilote de ma carte radeon 9800 pro.
Depuis lors, j'ai un message à l'ouverture de windows :
erreur MOM.implementation version 0.2.2637 38862 culture=neutral, public key token .....
Comment résoudre ce problème svp ?
j'ai lu que ça pouvait être une histoire de driver, le mien vient du lien clubic.
Merci d'avance

12 réponses

Il faut aller là maintenant pour voir la procédure !
http://support.amd.com/fr/kbarticles/Pages/26494-Radeon-MOM-CCC-implementation.aspx
8
Merci beaucoup, tu viens de me sauver la vie :D
0
crapoulou Messages postés 28158 Date d'inscription mercredi 28 novembre 2007 Statut Modérateur, Contributeur sécurité Dernière intervention 16 avril 2024 7 990
16 janv. 2011 à 12:17
Bonjour,

Copie de l'article (En cas de lien mort, mieux vaut que la procédure soit ici) :

737-26494: A MOM.implementation or CCC.implementation error appears after boot up in a Microsoft Windows based system 

Last Updated
01/06/2010   
Article Number
26494 

This article provides information on the possible reason why a MOM.implementation or CCC.implementation error message may appear and how to troubleshoot the issue to allow the system to operate effectively

Issue Description:
A MOM.implementation or CCC.implementation error message may appear when starting, installing, updating or uninstalling the ATI Catalyst(TM) software. The error message states:

    Could not load file or assembly 'CLI.Implementation, Version 2.0.3595.17816, Culture=neutral, PublicKeyToken=90ba9c70f846762e' or one of its dependencies. The system cannot find the file specified

Technical Details:
This error is a result of improper installation of the ATI Catalyst software and / or the Microsoft .NET Framework . If the Microsoft .NET Framework is not able to locate an assembly at run time, it can cause an incorrect location to be used, an invalid native image to show or version number mismatch. Refer to the Fuslogvw.exe (Assembly Binding Log Viewer) article on Microsoft website for additional information

Recommendations:
To prevent the error message from appearing, AMD Customer Care recommends performing a clean install of the ATI Catalyst software and the Microsoft .NET framework. Follow the steps below in order to successfully install the ATI Catalyst software:

   1.
      Note! Before getting started, ensure that you know the model of your graphics card. It will come in handy for several steps in the process. Refer to Article GPU-55 for information on how to identify your graphics card
   2.
      Verify that the graphics card is compatible with the motherboard. Refer to the motherboard manual to determine compatibility
   3.
      Verify that the graphics card's requirements are met by the system. Refer to AMD's Products and Technologies page to determine the system requirements for your graphics card
   4.
      Verify that the operating system has the latest service packs / updates
   5.
      Download the latest drivers for the graphics card from AMD's Graphics Drivers & Software page. Refer to Article GPU-56 for information on how to use the graphics driver utility
   6.
      Remove any pre-existing drivers / software for the graphics card. Refer to Article GPU-57 for detailed instructions on how to uninstall old drivers
         1.
            If unable to successfully uninstall the ATI Catalyst software using the uninstall feature provided with the software, the following third party utilities may help:
               1.
                  DriverCleaner Pro v1.5 (freeware) for 32bit operating systems and
               2.
                  DriverSweeper (freeware) for 64bit operating systems
               3.
                  Note! The third party utilities are provided as is and is not supported by AMD. It has not completed any AMD testing, and is only recommended for users experiencing the particular issue
   7.
      Uninstall all versions of the Microsoft .NET Framework
         1.
            If unable to successfully uninstall the .Net Framework using the Microsoft's uninstall utility, the following third party utility may help: https://docs.microsoft.com/en-us/archive/blogs/
         2.
            Note! The third party utility is provided as is and is not supported by AMD. It has not completed any AMD testing, and is only recommended for users experiencing the particular issue
   8.
      Install the latest drivers for the graphics card and .NET Framework. For detailed instructions on how to install the latest graphics drivers, refer to:
         1.
            Article GPU-33 for a Windows 7 based system
               1.
                  Note! The .NET Framework software is an integral component of Windows® 7 and does not require independent installation
         2.
            Article GPU-1 for a Windows Vista based system
               1.
                  Note! The .NET Framework software is an integral component of Windows Vista® and does not require independent installation 
         3.
            Article GPU-2 for a Windows XP / Windows 2000 based system
               1.
                  Note! For Windows XP, the .NET Framework must be installed separately.  Refer to the Microsoft .NET Framework 4 (Web Installer) page on Microsoft's website for more information and/or to obtain the latest .NET framework software

Applicable Products:
This article applies to the following configuration(s):

    * Hardware:
          o ATI Radeon(TM) series of products
          o ATI All-in-Wonder(TM) series of products
          o ATI FirePro(TM) series of products
          o ATI FireGL V(TM) series of products
          o ATI FireMV(TM) PCI Express series of products
    * Software:
          o ATI Catalyst(TM) Control Center
    * Operating Systems:
          o Windows® 7 32-bit Edition
          o Windows 7 64-bit Edition
          o Windows Vista® 32-bit Edition
          o Windows Vista 64-bit Edition
          o Windows® XP Professional
          o Windows XP Professional x64 Edition
          o Windows XP Home Edition
          o Windows XP Media Center Edition

(C) 2010 Advanced Micro Devices, Inc. All rights reserved.  AMD, the AMD Arrow logo, ATI, the ATI logo, Catalyst, ATI Radeon, and combinations thereof and FirePro, Fire GL and FireMV are trademarks of Advanced Micro Devices, Inc.  HDMI is a registered trademark of HDMI Licensing, LLC.  Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corp.
 


DISCLAIMER
 
The information presented in this document is for informational purposes only and may contain technical inaccuracies, omissions and typographical errors. AMD reserves the right to revise this information and to make changes from time to time to the content hereof without obligation of AMD to notify any person of such revisions or changes.
 
AMD MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE CONTENTS HEREOF AND ASSUMES NO RESPONSIBILITY FOR ANY INACCURACIES, ERRORS OR OMISSIONS THAT MAY APPEAR IN THIS INFORMATION. AMD SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL AMD BE LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF ANY INFORMATION CONTAINED HEREIN, EVEN IF AMD IS EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
0
FlyingHat Messages postés 29 Date d'inscription dimanche 3 juillet 2005 Statut Membre Dernière intervention 15 août 2007
15 août 2007 à 22:27
Salut,

J'avais ce même problême, la solution est d'installer Microsoft Net.Framework V.2 et V.3 si tu n'as pas, désinstaller Catalyst, redemarrer ton PC, reinstaller Catalyst, redemarrer ton PC. J'ai suivi ce protocole d'une autre personne qui a efficacement résolu ce même problême de cette manière après plusieurs heures de recherche sur Google.


Inutilement, FlyingHat.
0
Salut,

comment fai tu pour désinstaller Catalyst? Je ne voi pas d'utilitaire de désinstallation dans le dossier...

Désolé je débarque un peu sur XP je ne suis dessus que via BootCamp sur mon MacPro pour avoir accé à la logithèque de jeux windows...

Merci d'avance ...

SITRALE.
0
Hello les gars,

Voici une procédure sure et approuvée par AMD/ATI pour résoudre ce problème. On cherche souvent ailleurs alors que la solution se trouve chez le fabricant mais désolé c'est en anglais.
Allez sur ce lien http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=26494

J'ai eu le même problême et ce fut résolut avec ça. Petit conseil, si vous avez NET framework 3.0, desinstallez le également avant NET framework 2.0; pas la peine de désinstaller NET 1.0

A bientôt
0
ctboss Messages postés 20 Date d'inscription lundi 26 octobre 2009 Statut Membre Dernière intervention 5 mars 2010 1
27 nov. 2009 à 17:56
bonjour,
le fait de decocher l'application ATI ds msconfig n'a pa de repercusions sur les performances du pc?
sinn etant sur windows 7 j'ai l'impression qu'il est impossible de desinstaller net framework 3.5(il est integré je croi).Comment faire??
cdlt
0
Maintenant c'est mieux d'aller sur le site du fabricant et installer la dernière version du pilote.
(le mieux c'est aussi d'installer les màj de ms y compris les framework net et tout le tralalala).
0

Vous n’avez pas trouvé la réponse que vous recherchez ?

Posez votre question
Salut à tous,

Si vraiment tu n'arrives pas à te débarrasser de se message d'erreur, effectue une restauration système à une date antérieur au problème (il est préférable d'effectuer la restauration système en mode sans échec)

F8 au démarrage puis démarrer / tout les programmes / accessoires / outils système / restauration système.
0
doiron Messages postés 7 Date d'inscription mercredi 12 décembre 2007 Statut Membre Dernière intervention 11 août 2008 7
3 févr. 2008 à 12:47
J'ai exactement le même problème, je vais essayer les solutions que vous proposez.

Merci à tous.
-1
doiron Messages postés 7 Date d'inscription mercredi 12 décembre 2007 Statut Membre Dernière intervention 11 août 2008 7
3 févr. 2008 à 14:01
Je confirme la méthode proposée par Thai le 14.11.07.

Et un problème de moins !
-1
ithaque Messages postés 230 Date d'inscription samedi 29 novembre 2003 Statut Membre Dernière intervention 5 mai 2013 88
16 févr. 2008 à 20:20
moi aussi, j'ai des soucis avec ma carte graphique (Radeon X300)
et donc j'en viens à installer catalyst, ainsi que les NET framework
j'ai installé le NET framework v3.0 mais j'ai ce pb de "MOM.implementation"
donc je vais essayer de faire ce que dit Thai.

mais est ce qu'il faut désinstaller le NET framework 3.0 et ensuite réinstaller les v1, v2 et v3 avec d'installer catalyst ?
-1
ithaque Messages postés 230 Date d'inscription samedi 29 novembre 2003 Statut Membre Dernière intervention 5 mai 2013 88
16 févr. 2008 à 20:22
effectivement : où trouve t on de quoi désinstaller catalyst ?
-1
Salut à tous,

J'ai tout simplement décoché l'application ATI dans "msconfig" (Startup) afin de l'empêcher de démarrer à l'allumage du windows.

Mon système fonctionne et reste stable et je n'ai pas besoin de plus.

Bàv
-1
oui, c'est ton driver qui a un problème, j'ai eu le meme quand j'ai formater mon ordi..je suis aller sur internet, j',ai télécharger le meme driver que j'avais, j'ai désinstallé ma carte ati . j'ai toujours booter a chaque fois, j'ai réinstallé le nouveau driver, et hop tout fonctionne....toshiba me disait que c'était un problème matériel, absolument pas, mon ordi n'a pas un an..va voir dans ton gestionnaire de périphérique, prend le bon driver.et tu règleras ton problème
-1