J'ai un gros problème de gravure de dvd-R avec nero 7 quand je lance la gravuredu DVD source sa marche mais dès que je mets le DVD-R à graver sa ne marche pas , il stop directement la gravure . Sa ne vient pas de la marque du DVD puisque j'ai essayé la même gravure avec un DVD+RW est sa marche !!!
Gouirhate Menasra 1C80-0000-19E5-MA2X-4004-1327-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.86 - HA 1 TA 1 - 7.8.5.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD_RW ND-3500AG>Version: 2.86 - HA 1 TA 1 - 7.8.5.0 Adapter driver: <IDE> HA 1Scsi-Device-Map
CdRomPeripheral : DVD-16X DVD-ROM BDV316E atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD2000JD-55HBB0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 1 DMA: OffCDRom-Device-Map
DVD-16X DVD-ROM BDV316E I: CDRom0 _NEC DVD_RW ND-3500AG J: CDRom1 NERO IMAGEDRIVE2 K: CDRom4 NERO IMAGEDRIVE2 L: CDRom7 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1047856kB) Free physical memory: 511MB (524200kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.4.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 17:01:22 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:01:23 #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:01:23 #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD+RW S01 T01 Con 0x04 Start 0 Len 2278144 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 17:01:23 #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 2278144 = 2278144, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 17:01:23 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 17:01:24 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2278143 (506:15.18, 4449MB) 17:01:24 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 17:01:24 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:01:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Données (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2278144 (2278144) = #2278144/506:15.19 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278144 blocks [Image Recorder] -------------------------------------------------------------- 17:01:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665638912, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2278144 | 2278144 | 0x00 2278144 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 17:01:24 #11 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-No (<64KB) 17:01:24 #12 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 17:01:24 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:01:24 #14 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 17:11:39 #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 2278144 (22C300h), length 0 blocks 17:11:40 #16 Phase 121 File dlgbrnst.cpp, Line 1762 Creating Image completed successfully 17:11:42 #17 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:11:45 #18 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:11:45 #19 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 17:11:47 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:11:49 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4665638912 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Gouirhate\Mes documents\TempImage.nrg> 17:11:49 #3 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 17:15:34 #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2278143 (506:15.18, 4449MB) 17:15:34 #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 17:15:34 #6 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 17:15:34 #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Inconnu. Medium required by compilation: DVD R/RW; DVD+R DL.) 17:15:34 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2278144 (2278144) = #2278144/506:15.19 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278144 blocks [J: _NEC DVD_RW ND-3500AG] -------------------------------------------------------------- 17:15:34 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [J: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4665638912, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2278144 | 0 | 0x00 2278144 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 17:15:34 #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 17:15:34 #11 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-No, small files-No (<64KB) 17:15:34 #12 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11 080 Ko/s) 17:15:34 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:15:34 #14 Text 0 File DVDR.cpp, Line 3192 Recording mode: Sequential Recording Mode 17:15:34 #15 Text 0 File DVDR.cpp, Line 3348 Start write address at LBA 0 DVD high compatibility mode: Yes 17:15:34 #16 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:15:34 #17 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 C3 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 17:15:34 #18 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752 Illegal disc J: _NEC DVD_RW ND-3500AG 17:15:34 #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752 Could not perform start of Disc-at-once 17:15:35 #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 17:15:35 #21 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11 080 Ko/s) 17:15:35 #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:15:37 #23 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 17:15:37 #24 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Pourtant ,j'ai fait le "Nero info tool" et mon lecteur grave belle et bien les DVD-R . Et lors de la gravure , quand il faut échangé de dvd, il met plein de type de dvd sauf "dvd-r ( j'aurais aimez vous montrez ce que je viens de dire en image mais je ne sait pas se commet faire, sur se forum ^^'. Aidez moi s'il vous plaît.
merci
