Configuration RSVP

Bonjour.
J'ai des soucis de configuratio RSVP sur une maquette.
[u]Voici ma topologie :[/u]

PBX -- R1(Gw/Gk) -- R2(Wan) ----- R3(Wan) -- R4(Gw/Gk) -- PBX

J'ai mis en place le RSVP sur toutes les interfaces. La reservation a bien lieue dans un sens, c'est a dire, le 1er message PATH est emis mais il n'y a pas de retour l'autre cote. Pas de message PATH en retour.
Il n'y a pas de reservations qui se realise.
Quand je fais sh ip rsvp installed sur les routeurs, je n'ai rien....
Voici les fichiers de configurations:

R1_Zone1#sh tech

------------------ show version ------------------

Cisco IOS Software, 2800 Software (C2800NM-IPVOICE_IVS-M), Version 12.3(14)T7, R
ELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 22-Mar-06 18:40 by pwade

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

R1_Zone1 uptime is 16 hours, 56 minutes
System returned to ROM by reload at 17:06:01 UTC Mon Feb 12 2007
System image file is "flash:c2800nm-ipvoice_ivs-mz.123-14.T7.bin"

Cisco 2811 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FCZ104170AB
2 FastEthernet interfaces
4 Serial interfaces
1 Serial(sync/async) interface
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


------------------ show running-config ------------------


Building configuration...

Current configuration : 3815 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1_Zone1
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 1
network-clock-select 1 E1 0/1/0
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
!
!
no ip domain lookup
ip domain name yourdomain.com
no ftp-server write-enable
isdn switch-type primary-qsig
!
voice-card 0
codec complexity medium
no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
username cisco privilege 15 secret 5 <removed>
!
!
controller E1 0/1/0
framing NO-CRC4
pri-group timeslots 1-3,16
!
!
!
interface Loopback0
ip address 192.168.2.193 255.255.255.192
h323-gateway voip interface
h323-gateway voip id GK-zone1 ipaddr 192.168.2.193 1719
h323-gateway voip h323-id GW-zone1
h323-gateway voip tech-prefix 1#
h323-gateway voip bind srcaddr 192.168.2.193
!
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$
ip address 192.168.0.1 255.255.255.0
load-interval 30
duplex auto
speed auto
fair-queue 64 256 1
ip rsvp bandwidth 20 20
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0
bandwidth 512
no ip address
encapsulation frame-relay
shutdown
no keepalive
no fair-queue
clockrate 2000000
frame-relay traffic-shaping
ip rsvp bandwidth
!
interface Serial0/0/0.1 point-to-point
ip address 10.0.0.3 255.255.255.192
ip ospf network point-to-point
frame-relay interface-dlci 17
frame-relay ip rtp header-compression
ip rsvp bandwidth
!
interface Serial0/1/0:15
no ip address
isdn switch-type primary-qsig
isdn incoming-voice voice
no cdp enable
!
router ospf 113
log-adjacency-changes
network 10.0.0.0 0.0.0.63 area 1
network 192.168.0.0 0.0.0.255 area 0
network 192.168.2.192 0.0.0.63 area 0
!
ip classless
!
ip http server
ip http access-class 23
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
!
!
control-plane
!
no call rsvp-sync
!
!
voice-port 0/1/0:15
cptone FR
timeouts interdigit 5
!
!
!
!
!
dial-peer voice 1 pots
destination-pattern 1[0-8]
direct-inward-dial
port 0/1/0:15
forward-digits all
!
dial-peer voice 100 voip
destination-pattern .T
modem passthrough nse codec g711alaw
session target ras
dtmf-relay cisco-rtp h245-signal
req-qos guaranteed-delay
codec g729r8 bytes 40
fax nsf 000000
no vad
!
gateway
timer receive-rtp 1200
!
!
gatekeeper
zone local GK-zone1 zone1.test.com 192.168.2.193
zone remote GK-zone2 zone2.test.com 172.16.0.2 1719
zone prefix GK-zone1 1. gw-priority 10 GW-zone1
zone prefix GK-zone2 2.
zone prefix GK-zone2 3.
gw-type-prefix 1#* default-technology
no shutdown
!
banner login ^C
------------------------------------------------------------­-----------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.

Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use
.

For more information about SDM please follow the instructions in the QUICK START

GUIDE for your router or go to http://www.cisco.com/go/sdm
------------------------------------------------------------­-----------
^C
!
line con 0
login local
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
absolute-timeout 1000
login local
line vty 5 15
access-class 23 in
privilege level 15
login local
!
scheduler allocate 20000 1000
!
end




R2_Zone1#sh tech

------------------ show version ------------------

Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9-M), Version 12.3(14)T7, R
ELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 22-Mar-06 20:12 by pwade

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

R2_Zone1 uptime is 1 week, 18 hours, 8 minutes
System returned to ROM by power-on
System image file is "flash:c2801-entservicesk9-mz.123-14.T7.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2801 (revision 5.0) with 116736K/14336K bytes of memory.
Processor board ID FHK090621WH
2 FastEthernet interfaces
2 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62592K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


------------------ show running-config ------------------


Building configuration...

Current configuration : 2547 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2_Zone1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
!
no ip domain lookup
no ftp-server write-enable
!
!
!
!
!
!
!
!
!
!
!
!
!
!
username pat password 0 <removed>
!
!
class-map match-any gold
match dscp af31
match access-group 101
class-map match-any voice
match dscp ef
!
!
policy-map qos2
class voice
priority 200
class gold
bandwidth 150
class class-default
fair-queue
policy-map qos
class voice
priority 200
class gold
bandwidth 150
class class-default
fair-queue
!
!
!
!
interface FastEthernet0/0
ip address 192.168.0.2 255.255.255.0
duplex auto
speed auto
fair-queue 64 256 1
ip rsvp bandwidth 20 20
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
bandwidth 512
no ip address
encapsulation frame-relay
load-interval 30
no keepalive
no fair-queue
frame-relay traffic-shaping
frame-relay ip rtp header-compression
ip rsvp bandwidth
!
interface Serial0/1/0.1 point-to-point
ip address 10.0.0.1 255.255.255.192
ip ospf network point-to-point
frame-relay interface-dlci 17
class to-site1
frame-relay ip rtp header-compression
ip rsvp bandwidth
ip rsvp data-packet classification none
ip rsvp resource-provider none
!
interface Serial0/2/0
bandwidth 2000000
ip address 10.0.0.193 255.255.255.192
encapsulation frame-relay
ip ospf network point-to-point
shutdown
no keepalive
no fair-queue
clockrate 2000000
frame-relay traffic-shaping
frame-relay interface-dlci 16
class to-site2
!
router ospf 113
log-adjacency-changes
network 10.0.0.0 0.0.0.63 area 1
network 10.0.0.192 0.0.0.63 area 1
network 192.168.0.0 0.0.0.255 area 0
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
map-class frame-relay to-site1
frame-relay cir 512000
frame-relay bc 51200
frame-relay be 0
frame-relay mincir 512000
frame-relay adaptive-shaping becn
service-policy output qos
!
map-class frame-relay to-site2
frame-relay cir 2000000
frame-relay bc 200000
frame-relay be 0
frame-relay mincir 2000000
service-policy output qos2
access-list 101 permit udp any any eq 1200
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
password <removed>
line aux 0
line vty 0 4
password <removed>
absolute-timeout 1000
login local
!
end

R3_Site1_Zone2#sh tech

------------------ show version ------------------

Cisco IOS Software, 2801 Software (C2801-ENTSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 22-Mar-06 20:12 by pwade

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

R3_Site1_Zone2 uptime is 16 hours, 53 minutes
System returned to ROM by reload at 17:01:33 UTC Mon Feb 12 2007
System image file is "flash:c2801-entservicesk9-mz.123-14.T7.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2801 (revision 5.0) with 116736K/14336K bytes of memory.
Processor board ID FHK090910GP
2 FastEthernet interfaces
1 Serial(sync/async) interface
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62592K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


------------------ show running-config ------------------


Building configuration...

Current configuration : 2000 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3_Site1_Zone2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
!
no ip domain lookup
no ftp-server write-enable
!
!
!
!
!
!
!
!
!
!
!
!
!
!
username pat password 0 <removed>
!
!
class-map match-any gold
match dscp af31
match access-group 101
class-map match-any voice
match dscp ef
!
!
policy-map qos
class voice
priority 200
class gold
bandwidth 150
class class-default
fair-queue
!
!
!
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
fair-queue 64 256 1
ip rsvp bandwidth 20 20
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1/0
bandwidth 512
no ip address
encapsulation frame-relay
load-interval 30
no keepalive
no fair-queue
frame-relay traffic-shaping
frame-relay ip rtp header-compression
ip rsvp bandwidth
!
interface Serial0/1/0.1 point-to-point
ip address 10.0.0.2 255.255.255.192
ip ospf network point-to-point
frame-relay interface-dlci 17
class to-zone1
frame-relay ip rtp header-compression
ip rsvp bandwidth
ip rsvp data-packet classification none
ip rsvp resource-provider none
!
router ospf 113
log-adjacency-changes
network 10.0.0.0 0.0.0.63 area 1
network 192.168.1.0 0.0.0.255 area 1
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
map-class frame-relay to-zone1
frame-relay cir 512000
frame-relay bc 51200
frame-relay be 0
frame-relay mincir 512000
frame-relay adaptive-shaping becn
service-policy output qos
!
map-class frame-relay to-site1
access-list 101 permit udp any any eq 1200
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
password <removed>
login
line aux 0
line vty 0 4
absolute-timeout 1000
login local
!
end


R4_Site1_Zone2#sh tech

------------------ show version ------------------

Cisco IOS Software, 2800 Software (C2800NM-IPVOICE_IVS-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 22-Mar-06 18:40 by pwade

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

R4_Site1_Zone2 uptime is 16 hours, 55 minutes
System returned to ROM by reload at 17:04:17 UTC Mon Feb 12 2007
System image file is "flash:c2800nm-ipvoice_ivs-mz.123-14.T7.bin"

Cisco 2821 (revision 53.51) with 251904K/10240K bytes of memory.
Processor board ID FHK1042U0AU
2 Gigabit Ethernet interfaces
4 Serial interfaces
1 Channelized E1/PRI port
2 Voice FXS interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


------------------ show running-config ------------------


Building configuration...

Current configuration : 3621 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R4_Site1_Zone2
!
boot-start-marker
boot system flash c2800nm-ipvoice_ivs-mz.123-14.T7.bin
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 1
network-clock-select 1 E1 0/1/0
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
!
!
no ip domain lookup
ip domain name yourdomain.com
no ftp-server write-enable
isdn switch-type primary-qsig
!
voice-card 0
codec complexity medium
no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
username cisco privilege 15 secret 5 <removed>
!
!
controller E1 0/1/0
framing NO-CRC4
pri-group timeslots 1-3,16
!
!
!
interface Loopback0
ip address 172.16.0.2 255.255.0.0
h323-gateway voip interface
h323-gateway voip id GK-zone2 ipaddr 172.16.0.2 1719
h323-gateway voip h323-id GW-zone2-1
h323-gateway voip tech-prefix 1#
h323-gateway voip bind srcaddr 172.16.0.2
ip rsvp bandwidth
ip rsvp flow-assist
ip rsvp resource-provider wfq pvc
!
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 192.168.1.2 255.255.255.0
duplex auto
speed auto
fair-queue 64 256 1
ip rsvp bandwidth 20 20
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
!
interface Serial0/1/0:15
no ip address
isdn switch-type primary-qsig
isdn incoming-voice voice
no fair-queue
no cdp enable
!
router ospf 113
log-adjacency-changes
network 172.16.0.0 0.0.255.255 area 1
network 192.168.1.0 0.0.0.255 area 1
!
ip classless
!
ip http server
ip http access-class 23
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
!
!
control-plane
!
no call rsvp-sync
!
!
voice-port 0/0/0
cptone FR
timeouts interdigit 5
!
voice-port 0/0/1
cptone FR
timeouts interdigit 5
!
voice-port 0/1/0:15
cptone FR
timeouts interdigit 5
!
!
!
!
!
dial-peer voice 1 pots
destination-pattern 2[0-8]
direct-inward-dial
port 0/1/0:15
forward-digits all
!
dial-peer voice 100 voip
destination-pattern .T
modem passthrough nse codec g711alaw
session target ras
dtmf-relay cisco-rtp h245-signal
req-qos guaranteed-delay
codec g729r8 bytes 40
fax nsf 000000
no vad
!
gateway
timer receive-rtp 1200
!
!
gatekeeper
zone local GK-zone2 zone2.test.com 172.16.0.2
zone remote GK-zone1 zone1.test.com 192.168.2.193 1719
zone prefix GK-zone1 1.
zone prefix GK-zone2 2. gw-priority 10 GW-zone2-1
zone prefix GK-zone2 3. gw-priority 10 GW-zone2-2
gw-type-prefix 1#* default-technology
no shutdown
!
banner login ^C
------------------------------------------------------------­-----------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser> privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
------------------------------------------------------------­-----------
^C
!
line con 0
login local
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
line vty 5 15
access-class 23 in
privilege level 15
login local
!
scheduler allocate 20000 1000
!
end

Configuration: Windows XP
Firefox 1.5.0.9