1) La Freebox est trivial a configurer en Linux surtout en Mandrake avec DrakConf: => config reseau => nouvelle connexion reseau local LAN et ici:
soit DHCP avec DNS automatique (ca doit foncitonner)
soit (car tu es en mode router de la FB) IP manuelle avec 192.168.0.1 comme IP, 255.255.255.0 masque et 192.168.0.254 comme passerelle par default et les DNS de Free a mettre manuellement.

Les deux doivent fonctionner!

2) En Knoppix tu as une carte reseau eth0 avec adresse MAC qui est:
HWaddr 00:07:CB:00:00:FF
En Mandrake ni eth0 ni eth1 ont cette adresse MAC. Donc ici eth0 et eth1 sont autre chose (firewire, wireless, ...) mais pas la meme carte ethernet utilise en Knoppix. Regarde en Knoppix quel le module attache a eth0
avec lsmod, "grep eth modules.conf" (noyau 2.4) ou
"grep eth modprobe.conf" (noyau 2.6).

Tu dois mettre le meme module dans le modprobe.conf de Mandrake avec une ligne comme: "alias eth2 <nom_module>" et apres cette modif il faut taper "depmod -a" (tout ca en root).
Peut-etre c'est deja le cas. Alors il te faudra simplement mettre le DHCP sur eth2 et non eth0 sur eth1.

PS.: Pour USB il faut charger le bon driver (je crois CDCether ou usbnet en 2.6) mais tu devrais utiliser ethernet, plus facile, plus stable, plus sur.

Un complement: Je viens de voir que tu as essaye avec le driver "eagle-usb". C'est uniquement pour le sagem 800 ou 908 (branche par usb).
Pour la Freebox ce n'est pas le bon driver ni en USB ni en ethernet. Dans le deux cas c'est faux!

--------------
La connection USB avec la Freebox necessite le driver "usbnet" (il est disponible dans le Mandrake). Il suffit de le charger avec "modprobe usbnet" ce qui cree un device genre "ethX" ou X=0, 1, 2, ... . Il faut regarder les messages du noyau avec "dmesg" (c.-a-d. taper la commande "dmesg") pour voir le bon numero X pour toi (apres avoir fait "modprobe usbnet" et apres avoir branche la Freebox par usb). Apres il faut ajouter la bonne ligne:

alias ethX usbnet

dans /etc/modeprobe.conf et faire "depmod -a" et apres configurer dans DrakConf le DHCP sur ethX. Bien sur tu remplaceras X par le bon numero 0, 1, 2, 3, .... que tu as trouve grace a "dmesg" !!!!!

----------------
Pour ethernet c'est presque la meme chose sauf il faut y mettre un autre numero X avec ethX et mettre un autre driver (aussi appele "module" du noyau) =>

alias ethX <nom_driver_carte_reseau>

pour le fichier /etc/modprobe.conf.

Normalement cette ligne devrait deja etre bon si Mandrake a automatiquement reconnu ta carte reseau. (Par contre pour l'usbnet ce n'est normalement pas automatique.)

Typiquement apres l'installation de Mandrake la carte reseau est bien reconnue par le bon module et il faut seulment mettre le DHCP la dessus (dans le menu de DrakConf).

Merci pour la seconde couche :)

donc déjà ce post pour knoppix histoire de comprendre, si possible, pourquoi ça marche ;)

lsmod

Module Size Used by Not tainted
parport_pc 25128 1 (autoclean)
lp 7460 0
parport 22496 1 [parport_pc lp]
autofs4 8756 1 (autoclean)
af_packet 13544 0 (autoclean)
nls_iso8859-1 2844 1 (autoclean)
nls_cp437 4348 1 (autoclean)
agpgart 42724 0 (unused)
i810_audio 25048 0
ac97_codec 11884 0 [i810_audio]
soundcore 3428 2 [i810_audio]
forcedeth 9836 0
emu10k1-gp 1224 0 (unused)
gameport 1388 0 [emu10k1-gp]
CDCEther 11168 1
acm 5312 0 (unused)
mousedev 3832 1
hid 22564 0 (unused)
input 3168 0 [mousedev hid]
serial 52068 0 (autoclean)
ohci1394 22888 0 (unused)
ieee1394 183300 0 [ohci1394]
usb-ohci 18088 0 (unused)
usbcore 57824 1 [CDCEther acm hid usb-ohci]
pcmcia_core 39840 0
thermal 6692 0 (unused)
processor 9008 0 [thermal]
fan 1600 0 (unused)
button 2700 0 (unused)
battery 5952 0
ac 1792 0
ide-scsi 9040 0
rtc 7004 0 (autoclean)
ext3 64388 1 (autoclean)
jbd 46804 1 (autoclean) [ext3]

et puid dmsg:

ries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Athlon(tm) XP 2800+ stepping 00
per-CPU timeslice cutoff: 1462.81 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2088.0478 MHz.
..... host bus clock speed is 334.0876 MHz.
cpu: 0, clocks: 3340876, slice: 1670438
CPU0<T0:3340864,T1:1670416,D:10,S:1670438,C:3340876>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb9c0, last bus=2
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
00:00:01[A] -> 2-23 -> IRQ 23 level high
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
00:00:02[A] -> 2-22 -> IRQ 22 level high
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
00:00:02[B] -> 2-21 -> IRQ 21 level high
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
00:00:02[C] -> 2-20 -> IRQ 20 level high
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 22
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
00:01:06[A] -> 2-19 -> IRQ 19 level high
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
00:01:06[B] -> 2-16 -> IRQ 16 level high
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
00:01:06[C] -> 2-17 -> IRQ 17 level high
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
00:01:06[D] -> 2-18 -> IRQ 18 level high
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 1 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 0 0 1 1 D1
11 001 01 1 1 0 0 0 1 1 D9
12 001 01 1 1 0 0 0 1 1 E1
13 001 01 1 1 0 0 0 1 1 C9
14 001 01 1 1 0 0 0 1 1 C1
15 001 01 1 1 0 0 0 1 1 B9
16 001 01 1 1 0 0 0 1 1 B1
17 001 01 1 1 0 0 0 1 1 A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: 00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380021A, ATA DISK drive
hdd: PHILIPS CDRWDVD3210, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=10337/240/63
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
libata version 1.02 loaded.
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3406k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 144k freed
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.10f
Adding Swap: 1028120k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PHILIPS Model: CDRWDVD3210 Rev: P1.0
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (57 C)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:50:50 Aug 9 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xf88ec000, IRQ 22
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xf88ee000, IRQ 21
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ea004000-ea0047ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0081004908]
hub.c: new USB device 00:02.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active driver.
hub.c: new USB device 00:02.0-3, assigned address 2
usb.c: USB device 2 (vend/prod 0x10eb/0x1) is not claimed by any active driver.
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
CDCEther.c: CDCEther.c: 0.98.6 7 Jan 2002 Brad Hards and another
usb.c: registered new driver CDCEther
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw hashing
CDCEther.c: Can't use SetEthernetMulticastFilters request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 3
CDCEther.c: interrupt interval: 100
CDCEther.c: eth0: Freebox SA Freebox 3 1.00
CDCEther.c: eth0: 00:07:CB:00:00:FF
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
gameport0: Emu10k1 Gameport at 0xc400 size 8 speed 890 kHz
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
PCI: Setting latency timer of device 00:04.0 to 64
eth1: forcedeth.c: subsystem: 01462:570c bound to 00:04.0
Intel 810 + AC97 Audio, version 1.01, 00:49:25 Aug 9 2004
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xd800 and 0xd400, MEM 0x0000 and 0x0000, IRQ 20
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Creative EMU10K1 PCI Audio Driver, version 0.20, 00:49:53 Aug 9 2004
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
blk: queue c03661a0, I/O limit 4095Mb (mask 0xffffffff)
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: No way to disable net traffic
CDCEther.c: eth0 intr status -2
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
eth1: no link during initialization.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
CDCEther.c: rx status -75
CDCEther.c: eth0: RX status -75
CDCEther.c: rx status -75
CDCEther.c: eth0: RX status -75
CDCEther.c: rx status -75
CDCEther.c: eth0: RX status -75
CDCEther.c: rx status -75
CDCEther.c: eth0: RX status -75

Maintenant qu'est-ce qu'on a pour mdk:

le dmsg :

[root@mdk fred]# dmesg
Linux version 2.6.8.1-12mdk (quintela@n5.mandrakesoft.com) (gcc version 3.4.1 (Mandrakelinux (Alpha 3.4.1-3mdk)) #1 Fri Oct 1 12:53:41 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f7700
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff76c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Built 1 zonelists
Found and enabled local APIC!
Initializing CPU#0
Kernel command line: BOOT_IMAGE=mandrake ro root=308 noapic nolapic acpi=ht resume=/dev/hda10 splash=silent devfs=nomount
bootsplash: silent mode.
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2088.195 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035348k/1048512k available (1859k kernel code, 12256k reserved, 578k data, 200k init, 131008k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4136.96 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2800+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
init init/main.c:689
init init/main.c:702
init init/main.c:707
do_pre_smp_initcalls init/main.c:653
do_pre_smp_initcalls init/main.c:659
init init/main.c:711
init init/main.c:714
init init/main.c:716
init init/main.c:718
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd ... not found!
Freeing initrd memory: 83k freed
init init/main.c:724
do_basic_setup init/main.c:634
do_basic_setup init/main.c:636
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb9c0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:f530
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1113259156.357:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 14554 bytes, found (800x600, 14506 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380021A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: PHILIPS CDRWDVD3210, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
init init/main.c:726
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 200k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 11, pci mem f89e5000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem f89e7000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem f89f2000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 2-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb 2-2: new full speed USB device using address 3
ts: Compaq touchscreen protocol output
Adding 1028120k swap on /dev/hda10. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 128M @ 0xe0000000
Supermount version 2.0.4 for kernel 2.6
NTFS driver 2.1.15 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: loaded (max 8 devices)
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ea004000-ea0047ff] Max Packet=[2048]
hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(44)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0081004908]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usbnet: probe of 2-2:1.0 failed with error -22
usbcore: registered new driver usbnet
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 328 bytes per conntrack
inserting floppy driver for 2.6.8.1-12mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49544 usecs
intel8x0: clocking to 47404
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0322b60(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x100000
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture.... found (800x600, 10377 bytes, v3).
bootsplash: status on console 5 changed to on
cdrom: This disc doesn't have any tracks I recognize!

et au passage ce que j'avais dans modprobe.conf :

# This file is autogenerated from /etc/modules.conf using generate-modprobe.conf command

remove snd-emu10k1 /sbin/modprobe -r snd-pcm-oss; /sbin/modprobe --first-time -r --ignore-remove snd-emu10k1
install snd-emu10k1 /sbin/modprobe --first-time --ignore-install snd-emu10k1 && { /sbin/modprobe snd-pcm-oss; /bin/true; }
alias sound-slot-0 snd-intel8x0
alias sound-slot-1 snd-emu10k1
remove snd-intel8x0 /sbin/modprobe -r snd-pcm-oss; /sbin/modprobe --first-time -r --ignore-remove snd-intel8x0
install snd-intel8x0 /sbin/modprobe --first-time --ignore-install snd-intel8x0 && { /sbin/modprobe snd-pcm-oss; /bin/true; }
install usb-interface /sbin/modprobe ohci-hcd; /sbin/modprobe ehci-hcd; /bin/true
alias ieee1394-controller ohci1394

c ici que g ajouté alias ethx usbnet ( g essayé le 1 comme le 0) car dans le dmsg g pa su trouver lequel...

sinon après être passé sur drakconf il me met systématiquement ça (précision eth0 c mon port ethernet de ma carte mère, et l'autre c'est un port firewire detecter comment réseau...):

alias eth0 forcedeth
alias eth1 eth1394

pour finir voilà ce qui se passe derrière le rideau juste après depmod -a pendant drakconf :

Apr 11 23:21:17 mdk kernel: usb 2-2: USB disconnect, address 3
Apr 11 23:21:22 mdk kernel: ohci_hcd 0000:00:02.0: wakeup
Apr 11 23:21:22 mdk kernel: usb 1-3: new full speed USB device using address 2
Apr 11 23:21:22 mdk kernel: usbnet: probe of 1-3:1.0 failed with error -22
Apr 11 23:23:08 mdk drakconnect[6085]: running: /chkconfig --del adsl 2> /dev/null
Apr 11 23:23:28 mdk drakconnect[7494]: ### Program is starting ###
Apr 11 23:23:40 mdk drakconnect[7508]: ### Program is starting ###
Apr 11 23:23:49 mdk drakconnect[7518]: ### Program is starting ###
Apr 11 23:23:56 mdk drakconnect[7518]: running: dmidecode
Apr 11 23:23:57 mdk drakconnect[7518]: running: /bin/rpm -q --qf %{name} dhcp-client
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/iftab
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/iftab
Apr 11 23:23:59 mdk drakconnect[7518]: adding alias eth0 to forcedeth
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/sysconfig/network
Apr 11 23:23:59 mdk drakconnect[7518]: removed files/directories /etc/sysconfig/network-scripts/eth1
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth1
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth1
Apr 11 23:23:59 mdk drakconnect[7518]: written eth1 interface configuration in /etc/sysconfig/network-scripts/ifcfg-eth1
Apr 11 23:23:59 mdk drakconnect[7518]: removed files/directories /etc/sysconfig/network-scripts/eth0
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth0
Apr 11 23:23:59 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth0
Apr 11 23:23:59 mdk drakconnect[7518]: written eth0 interface configuration in /etc/sysconfig/network-scripts/ifcfg-eth0
Apr 11 23:23:59 mdk drakconnect[7518]: writing host information to /etc/hosts
Apr 11 23:23:59 mdk drakconnect[7518]: created file /etc/hosts
Apr 11 23:23:59 mdk drakconnect[7518]: running: /bin/rpm -q --qf %{name} dhcp-client
Apr 11 23:24:00 mdk drakconnect[7518]: modified file /etc/iftab
Apr 11 23:24:00 mdk drakconnect[7518]: modified file /etc/iftab
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/sysconfig/network
Apr 11 23:24:01 mdk drakconnect[7518]: removed files/directories /etc/sysconfig/network-scripts/eth1
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth1
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth1
Apr 11 23:24:01 mdk drakconnect[7518]: written eth1 interface configuration in /etc/sysconfig/network-scripts/ifcfg-eth1
Apr 11 23:24:01 mdk drakconnect[7518]: removed files/directories /etc/sysconfig/network-scripts/eth0
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth0
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/sysconfig/network-scripts/ifcfg-eth0
Apr 11 23:24:01 mdk drakconnect[7518]: written eth0 interface configuration in /etc/sysconfig/network-scripts/ifcfg-eth0
Apr 11 23:24:01 mdk drakconnect[7518]: writing host information to /etc/hosts
Apr 11 23:24:01 mdk drakconnect[7518]: created file /etc/hosts
Apr 11 23:24:01 mdk drakconnect[7518]: running: /bin/rpm -q --qf %{name} dhcp-client
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/modprobe.conf
Apr 11 23:24:01 mdk drakconnect[7518]: to put in /etc/modules
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/modules
Apr 11 23:24:01 mdk drakconnect[7518]: to put in /etc/modprobe.preload nvidia-agp
Apr 11 23:24:01 mdk drakconnect[7518]: modified file /etc/modprobe.preload
Apr 11 23:24:01 mdk drakconnect[7518]: running: /etc/rc.d/init.d/network restart
Apr 11 23:24:01 mdk netplugd[3169]: eth0: state INACTIVE flags 0x00001003 UP,BROADCAST,MULTICAST -> 0x00001002 BROADCAST,MULTICAST
Apr 11 23:24:01 mdk netplugd[7619]: /etc/netplug.d/netplug eth0 probe -> pid 7619
Apr 11 23:24:01 mdk kernel: eth0: no link during initialization.
Apr 11 23:24:01 mdk netplugd[3169]: eth0: state PROBING flags 0x00001002 BROADCAST,MULTICAST -> 0x00001003 UP,BROADCAST,MULTICAST
Apr 11 23:24:01 mdk netplugd[3169]: eth0: state PROBING_UP pid 7619 exited status 0
Apr 11 23:24:03 mdk network: Arrêt de l'interface eth0 : succeeded
Apr 11 23:24:03 mdk netplugd[3169]: eth1: state INSANE flags 0x00001043 UP,BROADCAST,RUNNING,MULTICAST -> 0x00001002 BROADCAST,MULTICAST
Apr 11 23:24:03 mdk netplugd[7982]: /etc/netplug.d/netplug eth1 probe -> pid 7982
Apr 11 23:24:03 mdk netplugd[3169]: eth1: state PROBING flags 0x00001002 BROADCAST,MULTICAST -> 0x00001043 UP,BROADCAST,RUNNING,MULTICAST
Apr 11 23:24:03 mdk netplugd[3169]: eth1: state PROBING_UP pid 7982 exited status 0
Apr 11 23:24:03 mdk netplugd[7983]: /etc/netplug.d/netplug eth1 in -> pid 7983
Apr 11 23:24:03 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:24:03 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:24:04 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:24:04 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:24:04 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
Apr 11 23:24:04 mdk network: Arrêt de l'interface eth1 : succeeded
Apr 11 23:24:04 mdk ifplugd(eth0)[7101]: Exiting.
Apr 11 23:24:04 mdk network: Arrêt de l'interface loopback : succeeded
Apr 11 23:24:04 mdk network: Application des paramètres réseau succeeded
Apr 11 23:24:05 mdk kernel: Disabled Privacy Extensions on device c0322b60(lo)
Apr 11 23:24:05 mdk network: Démarrage de l'interface loopback : succeeded
Apr 11 23:24:05 mdk ifup:
Apr 11 23:24:05 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:24:05 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:24:05 mdk ifup: Determining IP information for eth0...
Apr 11 23:24:06 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:24:06 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:24:06 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
Apr 11 23:24:12 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 19
Apr 11 23:24:12 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
Apr 11 23:24:25 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
Apr 11 23:24:31 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 20
Apr 11 23:24:38 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
Apr 11 23:24:51 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
Apr 11 23:24:56 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Apr 11 23:25:05 mdk dhclient: No DHCPOFFERS received.
Apr 11 23:25:05 mdk netplugd[3169]: eth1: state INNING pid 7983 exited status 256
Apr 11 23:25:07 mdk dhclient: No DHCPOFFERS received.
Apr 11 23:25:07 mdk ifup: failed.
Apr 11 23:25:07 mdk network: Activation de l'interface eth0 : failed
Apr 11 23:25:07 mdk ifplugd(eth1)[8610]: ifplugd 0.25 initializing.
Apr 11 23:25:07 mdk ifplugd(eth1)[8610]: Using interface eth1/00:02:3C:00:81:00 with driver <ip1394> (version: $Rev: 1224 $)
Apr 11 23:25:07 mdk ifplugd(eth1)[8610]: Using detection mode: IFF_RUNNING
Apr 11 23:25:07 mdk ifplugd(eth1)[8610]: Initialization complete, link beat detected.
Apr 11 23:25:07 mdk ifplugd(eth1)[8610]: Executing '/etc/ifplugd/ifplugd.action eth1 up'.
Apr 11 23:25:07 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:25:07 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:25:08 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:25:08 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:25:12 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
Apr 11 23:25:17 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
Apr 11 23:25:23 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
Apr 11 23:25:37 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
Apr 11 23:25:47 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 21
Apr 11 23:26:07 mdk ifplugd(eth1)[8610]: Killing child.
Apr 11 23:26:07 mdk network: Activation de l'interface eth1 : failed
Apr 11 23:26:08 mdk dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
Apr 11 23:26:13 mdk dhclient: No DHCPOFFERS received.
Apr 11 23:26:13 mdk ifplugd(eth1)[8610]: client: Determining IP information for eth1...
Apr 11 23:26:13 mdk ifplugd(eth1)[8610]: Program execution failed, return value is 0.
Apr 11 23:26:13 mdk ifplugd(eth1)[8610]: Exiting.
Apr 11 23:26:29 mdk drakconnect[7518]: running: /chkconfig --del adsl 2> /dev/null
Apr 11 23:26:31 mdk net_monitor[8714]: ### Program is starting ###
Apr 11 23:26:34 mdk net_monitor[8714]: running: kdesu --ignorebutton -c /sbin/ifup eth0
Apr 11 23:26:34 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:26:34 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:26:35 mdk dhclient: sit0: unknown hardware address type 776
Apr 11 23:26:35 mdk dhclient: eth1: unknown hardware address type 24
Apr 11 23:26:39 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
Apr 11 23:26:42 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Apr 11 23:26:47 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
Apr 11 23:26:57 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
Apr 11 23:27:09 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
Apr 11 23:27:23 mdk dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11


bref c pas gagné d'avance :/

la question qui me brule les lèvres : je sais que mdk 10.1 à un kernel 2.6 et que g exprès choisi la knoppix 3.6 kernel 2.4 et pas celle d'après car elles me faisait pas la magie de l'autoconfig freebox ; dois-je essayer la mdk 10.0 kernel 2.4 pour faire marcher mieux tout mon bazard ?

en tout cas merci d'avoir prit la patience déjà de me répondre et aussi d'avoir lu tout ça :))

donc déjà ce post pour knoppix histoire de comprendre, si possible, pourquoi ça marche ;)

Je crois c'est facile. Knoppix tourne en noyau 2.4 (par defaut) et la le bon module (ou driver si tu veux) pour l'USB de la Freebox s'appelle: CDCether. C'est meme explique dans la doc de Freebox disponible en pdf sur le site de Free (eux ce sont les seuls FAI ADSL qui expliquent pour Linux!).
Dans la derniere partie de ton dmesg on voit tres bien que ce module est charge et que le device reseau "eth0" lui a ete attache. Il semble que le Knoppix a tout seul automatique trouve de charger ce module et apres d'y mettre le bon numero IP par DHCP. Je suis vraiement impressionne de Knoppix! Je savais que ca marchait si on branche la Freebox par ethernet a la carte reseau mais en USB j'avais mes doutes. J'etais convaincu que tu avais la connexion en Knoppix par ethernet. Maintenant je comprend aussi mieux l'histoires des numeros MAC. Je crois le numero MAC affiche pour eth0 en Knoppix n'est pas de ta carte mais celui de la Freebox. En fait je crois que le debut 00:07:CB:... est universel pour tous les Freebox.


Maintenant pour le Mandrake 10.1 qui tourne en noyau 2.6 et non en 2.4 comme le Knoppix le bon module pour l'USB de la Freebox s'appelle usbnet. Donc tu n'as qu'a suivire mes instructions de mon 2nd poste. Vu de ton "ifconfig" de Mandrake ou il y a deja eth0 (probablement ta carte reseau) et eth1 (peut-etre firewire) je suppose que le module "usbnet" aura "eth2" attache a lui quand tu le charge.

Pour que ce soit claire, tu fais (en root apres "su -"):

1) Charger le module:

modprobe usbnet

alias eth2 usbnet

/sbin/depmod -a

Super clair !!! :)

ça ne peut que marcher, sauf qu'à mon humble avis c un pb hardware usb avec le driver usbnet que g, quoique je face en branchant la freebox g ce message :

usbnet: probe of 1-3:1.0 failed with error -22

et là c mort :/ (même en trifouillant le bios, acpi, pnp os, etc, rien n'y fait) ma freebox n'existe pas sous mdk :(

je pense sérieuseument à utiliser un kernel 2.4 avec cdcether, d'ailleurs on le voit dans le log de knoppix le driver reconnait sans pb la freebox v3.

et puis j'oubliais, ma freebox a son port ethernet qui marche pas, sinon je me serais bien évité tout ça ;)

merci pour ta patience :))

En Mandrake 10.1 il y a aussi un paquet pour le noyau 2.4, par exemple ici
ftp://ftp.lip6.fr/pub/linux/distributions/mandrake/10.1/i586­/media/main/

il y a:
ftp://ftp.lip6.fr/pub/linux/distributions/mandrake/10.1/i586­/media/main/kernel-2.4.27.0.pre2.1mdk-1-1mdk.i586.rpm

Regarde le tuto:
http://www.commentcamarche.net/faq/sujet-1328-%5BLinux%5D-In­staller-les-programmes-gestion-des-paquets-compil
pour comment installer ce paquet.

C'est sense de marcher en Mandrake. Je viens de trouver ce lien:

http://www.linuxfrench.net/article.php3?id_article=1484

Ca semble une facon plus simple pour faire la meme chose que j'ai decrite.

Tout est bien qui finit bien :)

donc j'étais parti pour mettre un kernel 2.4 sur mdk 10.0 mais c encore hors de ma porté, alors j'étais résigné à installé un knoppix 3.6 qui j'étais sûr allait reconnaître ma freebox (du moin en live cd, après le hd install, j'aurais du le faire qd même à la main) quand soudain...

zorro est arrivé ;) enfin je veux dire qu'il y avait une release de ubuntu que j'ai testé en live cd : nickel avec un tout dernier kernel 2.6 et le module cdcether qui me reconnait ma freebox !!

hop je prends l'iso d'install en 1 seul cd et là trop bluffé g jamais installé un os autant les bras croisés :)) juste pour choisir la partition et la langue, le reste en full auto, lol même pendant l'install il télécharge tous les pacquets de langue comme rien...

il y avait les live cd, maintenant on a les os clé en main avec tout ce qui faut kde, tout mozilla, open office, gestionnaire de pacquets et install direct over ftp, etc...

moi c la distrib qu'il me fallait pour pas abandonner linux une fois de plus.

Ubuntu rules ;)

et surtout merci pour ton aide, g appris plein de truc, pour bien entrer dans l'univers linux :)

un petit dmesg pour terminer :

ps: g juste un petit pb de montage de mes autres partitions même s'il me les affiches tous dans un fenêtre média:/ j'ai le msg d'erreur suivant:
mount: ne peut repérer /dev/hda7 dans /etc/fstab ou /etc/mtab
(on peut pas être parfait, mais je préfère surfer avec un os qui monte pas mes partitions que l'inverse ;)

++

Linux version 2.6.10-5-386 (buildd@terranova) (gcc version 3.3.5 (Debian 1:3.3.5
-8ubuntu2)) #1 Tue Apr 5 12:12:40 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f7700
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff76c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda9 ro quiet splash
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2088.252 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902044k/917504k available (1436k kernel code, 14928k reserved, 754k data
, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4136.96 BogoMIPS (lpj=2068480)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000
00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 0
0000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 0000000
0
CPU: AMD Athlon(tm) XP 2800+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a
n initrd
Freeing initrd memory: 4248k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb9c0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5040-0x507f has been reserved
audit: initializing netlink socket (disabled)
audit(1113492295.474:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4248KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (27 C)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380021A, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 >
Probing IDE interface ide1...
hdd: PHILIPS CDRWDVD3210, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (455 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 1028120k swap on /dev/hda10. Priority:-1 extents:1
EXT3 FS on hda9, internal journal
hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ts: Compaq touchscreen protocol output
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.10-5-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 128M @ 0xe0000000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 22, pci mem 0xeb002000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 21, pci mem 0xeb003000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 2-1: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:06.0 to 64
usb 2-2: new full speed USB device using ohci_hcd and address 3
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
intel8x0_measure_ac97_clock: measured 118073 usecs
intel8x0: clocking to 48000
eth0: register usbnet at usb-0000:00:02.1-2, CDC Ethernet Device
usbcore: registered new driver usbnet
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 19 (level, high) -> IRQ 19
gameport: pci0000:01:09.1 speed 890 kHz
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:09.2[B] -> GSI 16 (level, high) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ea004000-ea0047ff] Max Packet=[2048]
NET: Registered protocol family 17
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0081004908]
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f0500(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
eth0: no IPv6 routers present

Pff lol, tout est bien qui finit mieux !

juste par nostalgie je retourne sur ma partition mdk 10.1 et là grosse surprise : ma connexion freebox dhcp fonctionne !!

et g compris pourquoi : j'avais continué de trifouiller le bios avant d'installer ubuntu, genre manoeuvre de dernière chance, j'avais désactivé tout ce dont je n'avais pas besoin à savoir mon port ethernet intégré et l'interface usb 2.2 non utilisée, c donc l'un des deux ou les deux qui faisait bouchon et empechait cdcether de trouver ma freebox dhcp sur usb 1.1 donc un bon vieux pb de conflit hardware chez moi ;)

voilà pour la ptite histoire :)

++