Avoir le le driver de ma carte reseau marvell

Bonjour,
cher amis j'ai vraiment besoin de votre aide pcp je doit defendre un projet dans 2 jour concernant samba sous ubuntu aolors je fait l'installation de ubuntu version 6.06 sur ma machine mais je ne vois pas ma carte reseau marvell yukon 88E8056 PCI-E gigabit quand je vais sur le site de marvell j'ai pu telecharger le pilope mais je vais l'installer suivant le fichier readme contenu dans le package de pilote on me donne une erreur dont voici la decription et je vous demande de m'aider pcq moi je suis arriver au bout de souffle svp.

:~$ sudo -s
root@training:~# ls
alien_8.64_all.deb DriverInstall install_v10.61.3.3.tar.bz2
Desktop Examples install_v10.70.2.3.tar.bz2
root@training:~# cd DriverInstall
root@training:~/DriverInstall# ls
functions install.log install.sh README sk98lin.4 sk98lin.tar.bz2
root@training:~/DriverInstall# ./install
bash: ./install: Aucun fichier ou répertoire de ce type
root@training:~/DriverInstall# ./install.sh


Installation script for sk98lin driver.
Version 10.70.2.3 (Nov-03-2008)
(C)Copyright 2003-2008 Marvell(R).
====================================================
Add to your trouble-report the logfile install.log
which is located in the DriverInstall directory.
====================================================


1) installation
2) generate patch
3) exit
Choose your favorite installation method: 1


Please read this carfully!

This script will automatically compile and load the sk98lin
driver on your host system. Before performing both compilation
and loading, it is necessary to shutdown any device using the
sk98lin kernel module and to unload the old sk98lin kernel
module. This script will do this automatically per default.

Please plug a card into your machine. Without a card we aren't
able to check the full driver functionality.

Do you want proceed? (y/N) y




IMPORTANT INFORMATION!

We found an alternative driver for your Marvell product on this system.
The alternative driver is _NOT_ directly supported by Marvell and does not
include all features provided by your device. If you want to use the
sk98lin driver developed by Marvell, you may choose either to deactivate
or remove the alternative driver.

[PRESS ANY KEY FOR FURTHER INSTRUCTIONS]Do nothing:
- The sk98lin will be installed
NOTE: It may happen that the alternative driver will be loaded on
the next boot process. In this case the Marvell driver _WON'T_ be
loaded.

Deactivate driver:
- The alternative driver will be renamed to _skge.ko or _sky2.ko
- All references in the /etc/modprobe.conf file will be changed to
the sk98lin driver
- The alternative driver will be unloaded
- The sk98lin driver will be installed

Remove driver (recommended):
- The alternative driver will be removed from your system
- All references in the /etc/modprobe.conf file will be changed to
the sk98lin driver
- The alternative driver will be unloaded
- The sk98lin driver will be installed


1) Do nothing
2) Deactivate diver
3) Remove driver
Action: 2

Disconnect alternative devices: (done) [ OK ]
Unload alternative driver (done) [ OK ]
Create tmp dir (/tmp/Sk98IqfIjDILHqUWCRrBTZNaf) [ OK ]
Check user id (0) [ OK ]
Check kernel version (2.6.15-23-386) [ OK ]
Check kernel symbol file (/proc/kallsyms) [ OK ]
Check kernel type (SP) [ OK ]
Check architecture (found) [ OK ]
Set architecture (i386) [ OK ]
Check compiler (not found) [ failed ]
./functions: line 416: inst_failed : commande introuvable
Check mcmodel flags (none) [ OK ]
Check module support (/sbin/insmod) [ OK ]
Check make (not found) [ failed ]
./functions: line 466: inst_failed : commande introuvable
Check kernel gcc version (4.0.3) (Kernel:4.0.3 != gcc:624:) [ failed ]
There is a version mismatch between the compiler that was used
to build the current running kernel and the compiler which you
intend to compile the kernel module with. In most of the cases,
this is no problem, but there are cases in which this compiler-
mismatch leads to unexpected system crashes

If you know what you are doing and want to override this
check, you can do so by setting IGNORE_CC_MISMATCH system
variable:
Example: export IGNORE_CC_MISMATCH=1
Installation of package failed.
Delete temp directories (done) OK ]
root@training:~/DriverInstall#